Refine by
Applications
- Heat Transfer Solution for Food and Beverage
- Heat Transfer Solution for Power Generation
- Typical applications of the caloperm heat exchanger
- Heat Exchangers Solutions for Evaporation & Concentration of Environmental Waste Streams Sector
- Heat Exchangers Solutions for Anaerobic Digestion (AD) and Biogas Industry
- Heat Exchangers Solutions for Biodiesel Industry
- Heat Exchangers Solutions for Bioethanol Industry
- Heat Exchangers Solutions for Palm Oil Sector
- Heat Exchangers for Chemistry and Petrochemistry
- Heat Exchangers for Oil- and Gas Industries
- Heat Exchangers for Energy and Environmental Technology
- Moving Bed Heat Exchangers for Cooling Biosolids
- Moving Bed Heat Exchangers for High-Efficiency Cement Cooling
- Energy production from biomass
- Spiral Heat Exchanger for Process Industries
- Heat Recovery and Waste to Energy Solutions for BioMass
- Heat Recovery and Waste to Energy Solutions for Exhaust Gas
- Heat Recovery and Waste to Energy Solutions for Geothermal and Oil
- Heat Recovery and Waste to Energy Solutions for Industrial Processes
- Heat Recovery and Waste to Energy Solutions for Oil and Gas
- Heat Recovery and Waste to Energy Solutions for Waste Disposal
Plate Fin U Shaped Heat Exchanger Equipment & Supplies
386 equipment items found
Manufactured by:Megaunity Air System Co., Ltd. based in, CHINA
Plate-fin heat exchangers feature an extended secondary heat transfer surface, which consists of fins. Consequently, the heat transfer process takes place not only on the primary heat transfer surface (the plates) but also on the secondary heat transfer surface (the fins). The heat transfer area of the fins typically accounts for approximately 67% to 88% of the total heat transfer area of the ...
Premium
Manufactured by:Apex Engineering Products Corporation based inAurora, ILLINOIS (USA)
RYDLYME Biodegradable Descaler is used to safely and efficiently dissolve tough mineral deposits such as water scale, limescale, calcium, and rust from the water side of industrial equipment! Recommended by the U.S. Navy and countless OEMs, RYDLYME descaling chemical is NSF-registered for use in various industries and applications including beverage, pharmaceutical, bottling, and food processing ...
Manufactured by:GESMEX Exchangers GmbH based inSchwerin, GERMANY
Single plates are the basic form of Thermo Plate - heat exchangers and consist of two equal sheets from 0.8 to 2.0 mm thickness, or of a thin and a thicker plate with minimum 3.0 mm thickness. The metal sheets are spot-welded on the surface and welded at the edges. The plates are expanded hydraulically to the desired height of the inner flow channel. If required flow barriers can be welded in to ...
Manufactured by:Gedore Torque Solutions GmbH based inVaihingen/Enz, GERMANY
The GEDORE side power wrenches clamp and dismantle plate heat exchangers with ease. The flat and lightweight design can be adapted to the tightest of spaces without any support problems. The GEDORE side power wrench is available with electric and pneumatic ...
Manufactured by:Torraval Cooling S.L - part of The MITA group based inLeioa, SPAIN
These components can be supplied individually as a replacement for already installed plate heat exchangers. There is an available large stock of all elements needed to assemble plate heat ...
Manufactured by:Tecan Ltd. based inWeymouth, UNITED KINGDOM
Heat exchangers transfer heat from one liquid or gas to another without them mixing. They typically consist of a number of thin metal plates with complex channels that the liquid or gas flows between. By using photo chemical etching, we can produce complex designs, with precision to ±25µm and with a low tooling cost. The process significantly reduces limitations on channels, ...
Manufactured by:Ekin Industrial Heating and Cooling Industry Co. based inUmraniye, TURKEY
Plate heat exchangers are such devices that work with the principle of two different liquids making heat transfer in themselves. The liquid to be heated or the liquid heats, are totally seperated from each other with plates. In standart plate heat exchangers, there are 4 in-out ports and two of them are for heater liquid and two of them for heated liquid. With special production, it is possible ...
Manufactured by:Kapp based inBrignais, FRANCE
Collaboration with Vahterus. Liq/liq or liq/vap applications on clean fluids. Robustness and resistance to high pressures & ...
Manufactured by:Kapp based inBrignais, FRANCE
S-TYPE HEAT EXCHANGER; Multi-purpose condenser. U plates. Exchange area. up to 500 m² in one unit. Design conditions: Up to 35 bars and 350°C. Materials; Stainless Steel. Duplex, Super-Duplex. Nickel Alloys. ...
Manufactured by:Plate Heat Exchanger based inUmraniye, TURKEY
Plate heat exchangers are such devices that work with the principle of two different liquids making heat transfer in themselves. The liquid to be heated or the liquid heats, are totally seperated from each other with plates. In standart plate heat exchangers, there are 4 in-out ports and two of them are for heater liquid and two of them for heated liquid. With special production, it is possible ...
Manufactured by:Plate Heat Exchanger based inUmraniye, TURKEY
The liquid to be heated or the liquid heats, are totally seperated from each other with plates. In standart plate heat exchangers, there are 4 in-out ports and two of them are for heater liquid and two of them for heated liquid. With special production, it is possible to produce heat exchangers which have more than one heater or heated liquids. Plate heat exchangers are such devices that work ...
Manufactured by:Plate Heat Exchanger based inUmraniye, TURKEY
The liquid to be heated or the liquid heats, are totally seperated from each other with plates. In standart plate heat exchangers, there are 4 in-out ports and two of them are for heater liquid and two of them for heated liquid. With special production, it is possible to produce heat exchangers which have more than one heater or heated liquids. Plate heat exchangers are such devices that work ...
Manufactured by:Ekin Industrial Heating and Cooling Industry Co. based inUmraniye, TURKEY
Plate heat exchangers are such devices that work with the principle of two different liquids making heat transfer in ...
Manufactured by:Ekin Industrial Heating and Cooling Industry Co. based inUmraniye, TURKEY
Plate heat exchangers are such devices that work with the principle of two different liquids making heat transfer in ...
Manufactured by:AKG of America Inc. based inMebane, NORTH CAROLINA (USA)
Heavy duty construction for industry-proven reliability. Low total cost of ownership (TCO) thanks to long life. High pressure capability. Like the pre-engineered products available through AKG Thermal Systems, AKG offers custom-designed bar-plate heat exchangers for OEM and other applications. The range of internal and external fins available will be matched to the exact specifications of each ...
Manufactured by:DSD Chemtech GmbH & Co. KG based inCologne, GERMANY
TheMonPlex™ Heat Exchangeris compact and available in both cross flow and counter flow configurations. This modular design offers the most flexible and efficient flow ...
Manufactured by:Atmostat based inVillejuif Cedex, FRANCE
ATMOSTAT designs and manufactures a range of high performance heat exchangers made of superimposed pre-machined plates allowing channel geometries dedicated to each ...
Manufactured by:Om Metals & Engineers based inPune, INDIA
To ensure the innovativeness and high quality standards of our plate heat exchangers, we use a combination of latest and most efficient technologies such as sealing technology and improved plate design. ...
Manufactured by:Delta T Thermal Solutions LLC based inWichita Falls, TEXAS (USA)
The MAXCHANGER all-welded plate heat exchanger offers higher performance, in less space, at a lower cost. The unique geometry of the patented MAXCHANGER’s variable interspaces produce extremely high “U” values. Channels formed between the specially dimpled, welded plates direct the two heat transfer media counter currently through alternate paths for maximum efficiency, ...
Manufactured by:Eclipse, Inc. based inRockford, ILLINOIS (USA)
Exothermics SP Sinusoidal Plate Heat Exchangers are the flagship products of the Exothermics line. Our exclusive sinusoidal plate design provides maximum effectiveness and the highest performance available on the market today. High heat transfer effectiveness is produced by corrugating the heat transfer plates to achieve our proprietary sinusoidal wave pattern. The corrugated surface creates air ...