Steam Turbine Equipment In Europe
-
Manufactured by Osal Groupbased in TURKEY
The steam turbine consists of a high-pressure and a low-pressure part. Between them there is the extraction steam valve aimed at various users. Depending on quantity, pressure, and temperature the main steam moves the turbine wheel(s) and by means of a coupling the resulting mechanic power is transmitted to the ...
-
Manufactured by G-Team, a.s.based in CZECH REPUBLIC
Micro turbines up to the capacity of 3 MW. Steam turbines up to the capacity of 10 MW. Turbines with overhung impeller. Turbines with the impeller between the bearings. Turbines with a frequency converter. Multi-stage turbines. Gas expansion turbines. ...
-
Distributed by Tuba Turbine GmbHbased in GERMANY
A steam turbine is a device that converts the heat energy in captured, pressurized steam, and converts it to mechanical energy. A steam turbine generator works by heating water to extremely high temperatures until it is converted into steam, then the steam energy is used to ...
-
Manufactured by Mitsubishi Hitachi Power Systems, Ltd. (MHPS)based in USA
For more than 100 years, Mitsubishi Hitachi Power Systems has been engaged in the design, manufacture and installation of a wide range of steam turbines – from small single-cylinder turbines to 1,700MW-class large nuclear turbines – for applications across the spectrum of industrial and utility power ...
-
Manufactured by Stork, a Fluor Companybased in NETHERLANDS
Lifecycle services to ensure steam turbines run at peak performance. Peak performance: Turbines are expensive and production-critical pieces of equipment that need to be up & running at peak performance at all times. Avoiding unplanned downtime and extracting the maximum energy output, rank high on the wish list of most asset owners. ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Machines to be applied in large, typically coal-fired power plants. Leading edge technology, both in mechanical and aerodynamic design ensures the best efficiency and reliability either in USC or SC configurations. Full arch admission and full reaction ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
This type of machine is made by a HP/IP combined cylinder plus a double flow LP turbine (HIC-DL). The same concept is applied with two LP turbines when larger exhaust areas are needed. State of the art technology allows to reach the highest possible efficiency rate when a compact configuration is requested. Fossil power plants and combined ...
-
Manufactured by Spilling Energie Systeme GmbHbased in GERMANY
From the single-stage, overhung turbine to the efficiency-optimised multi-stage, tandem type turbo set – Spilling steam turbines are suited to the most varied customer requirements and applications. The wide-ranging product line is geared to the decentral generation of energy and enables a wide range of applications in driving power ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Two cylinders, single LP cylinder. This configuration covers with state of the art performances a broad range of applications: typical are combined cycles, solar and biomass with big flexibility in steam conditions provided by different versions of the same basic standard. Sliding pressure operations with full arch admission is typical ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Single flow, HP section flow in opposite direction to IP and LP (reverse) flow, single cylinder. This turbine standard has been developed to answer to needs of our customers both in the industrial and utility sector. Full arch, fully reaction HP section version is available as the control stage version, to fit any operational ...
-
Manufactured by Franco Tosi Meccanica SpAbased in ITALY
Single flow, same flow direction for the entire bladed path. Full arch admission with reaction blades as well as control stage version are available. Very simple mechanical scheme to meet the highest performance and reliability standards of a wide and diversified market, from industrial applications to geothermal needs. High speed and direct coupling ...
-
Manufactured by Enerset Electric Incbased in BULGARIA
Power - 100 kW. STEAM TURBINE. input steam. min 0.05 - max 50 bar. Steam temperature. 180 ℃ - max 350 ℃ ...
-
Manufactured by ISIEVI Makina San. Tic. Ltd. Sti.based in TURKEY
In power plants, electricity has been generated for a long time by utilizing the pressure and enthalpy of the steam. Since they operate at high speeds, steam turbines used in such facilities have high efficiency. In these types of steam turbines, superheated steam must be supplied in order to ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
Ansaldo Energia approached geothermal power plants nearly one hundred years ago, when the first turbine-generator units driven by geothermal steam went in operation in Larderello ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
Ansaldo Energia reheat steam turbines portfolio includes machines from two to five cylinders, capable of meeting a wide range of steam cycles, site conditions and operating modes for several applications, both in 50 and 60 Hz market, such ...
-
Manufactured by Enerset Electric Incbased in BULGARIA
Power - 250 kW. STEAM TURBINE. Input steam. min 0.05 - max 50 bar. Steam temperature. 180 ℃ - max 350 ℃ ...
-
Manufactured by MAN Energy Solutions SEbased in GERMANY
MAN Energy Solutions is among the leading turbomachinery suppliers worldwide. With their proven reliability and modular design, our steam turbines can be used for mechanical drive or power generation applications. With a power range between 1 - 180 MW, they can be scaled for special process and customer requirements. Our customers in the ...
-
Manufactured by KRÁLOVOPOLSKÁ KOVÁRNA s.r.o.based in CZECH REPUBLIC
We supply parts for customers throughout Europe with a focus on meeting high quality requests with highest quality request. Our parts are primarily used in HYDRO power, THERMAL power, NUCLEAR power, STEAM turbine components, INSIDE / GEOTHERMAL power plants, CRITICAL applications and WIND and TIDAL ...
-
Manufactured by MAN Energy Solutions SEbased in GERMANY
Our steam turbines are characterized by a variety of modular design features. We deliver or set them up in a configuration optimized for your special process requirements. This keeps delivery time and cost at a minimum level. MAN Energy Solutions has over 100 years of experience in developing steam turbines. They combine proven ...
-
Manufactured by Inpro/Sealbased in USA
Permanently protect steam turbine bearings in both high and low temperature environments. Inpro/Seal Steam Turbine Bearing Isolators utilize multiple features to ensure effective and permanent bearing protection against contamination ingress and lubrication loss on process steam ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you