Refine by
Steam Turbine Equipment Supplied In Italy
36 equipment items found
Manufactured by:Franco Tosi Meccanica SpA based inLegnano, ITALY
Single flow, same flow direction for the entire bladed path. Full arch admission with reaction blades as well as control stage version are available. Very simple mechanical scheme to meet the highest performance and reliability standards of a wide and diversified market, from industrial applications to geothermal needs. High speed and direct coupling ...
Manufactured by:Franco Tosi Meccanica SpA based inLegnano, ITALY
Single flow, HP section flow in opposite direction to IP and LP (reverse) flow, single cylinder. This turbine standard has been developed to answer to needs of our customers both in the industrial and utility sector. Full arch, fully reaction HP section version is available as the control stage version, to fit any operational configuration. Machine of this configuration may be realized with or ...
Manufactured by:Franco Tosi Meccanica SpA based inLegnano, ITALY
This configuration covers with state of the art performances a broad range of applications: typical are combined cycles, solar and biomass with big flexibility in steam conditions provided by different versions of the same basic standard. Sliding pressure operations with full arch admission is typical although control stage versions can be supplied as well. This arrangement ...
Manufactured by:Franco Tosi Meccanica SpA based inLegnano, ITALY
This type of machine is made by a HP/IP combined cylinder plus a double flow LP turbine (HIC-DL). The same concept is applied with two LP turbines when larger exhaust areas are needed. State of the art technology allows to reach the highest possible efficiency rate when a compact configuration is requested. Fossil power plants and combined cycles are the usual field of application, also in ...
Manufactured by:Franco Tosi Meccanica SpA based inLegnano, ITALY
Machines to be applied in large, typically coal-fired power plants. Leading edge technology, both in mechanical and aerodynamic design ensures the best efficiency and reliability either in USC or SC configurations. Full arch admission and full reaction ...
Manufactured by:Ansaldo Energia S.p.A. based inGenoa, ITALY
Ansaldo Energia approached geothermal power plants nearly one hundred years ago, when the first turbine-generator units driven by geothermal steam went in operation in Larderello ...
Manufactured by:Ansaldo Energia S.p.A. based inGenoa, ITALY
Ansaldo Energia reheat steam turbines portfolio includes machines from two to five cylinders, capable of meeting a wide range of steam cycles, site conditions and operating modes for several applications, both in 50 and 60 Hz market, such ...
Manufactured by:Ansaldo Energia S.p.A. based inGenoa, ITALY
Ansaldo Energia non reheat steam turbines portfolio includes machines from one to three cylinders design, capable of covering a wide range of steam cycles, site conditions and operating modes for several applications, both in 50 and 60 Hz market, such ...
Manufactured by:Franco Tosi Meccanica SpA based inLegnano, ITALY
In the last years, Franco Tosi Meccanica has consistently delivered to the market important projects on a global ...
Manufactured by:Rössl & Duso S.R.L. based inVEDELAGO (TV), ITALY
HP Inner Casing Weight 20 ton. Ext. Diam. 2.000 mm. Height 2.700 ...
Manufactured by:Rössl & Duso S.R.L. based inVEDELAGO (TV), ITALY
HP Outer Casing. Weight 30 ton. Ext. Diam. 3.500 mm. Height 3.800 ...
Manufactured by:Franco Tosi Meccanica SpA based inLegnano, ITALY
In the last years, Franco Tosi Meccanica has consistently delivered to the market important projects on a global ...
Manufactured by:Eric-Son based inNalles/Nals (BZ), ITALY
Eric-Son supplies highly efficient turnkey biomass cogeneration plants with steam turbines for the simultaneous production of power and heat for industrial processes or district heating. Additionally, by using an absorption chiller it is also possible to generate cooling energy. Numerous industrial processes relating to organic products create large quantities of ...
Manufactured by:Rössl & Duso S.R.L. based inVEDELAGO (TV), ITALY
LP Shaft 600 MW Weight 60 ton. Ext Diam. 1.600 mm. Lenqht 7.100 ...
Manufactured by:AST S.p.A. based inCornaredo (MI), ITALY
PRDS CV-8000 series has been specifically designed for severe steam conditioning services such as steam turbine bypass stations and all applications where perfect seal, frequent start-up from cold or warm conditions and fast opening is required. ...
Manufactured by:Ansaldo Energia S.p.A. based inGenoa, ITALY
Ansaldo Energia hydrogen cooled generators (THR series) are by proven design, robust, reliable and easy maintainable, used for gas turbines and steam turbines in single-shaft or multi-shaft configuration in high efficient power ...
Manufactured by:Flame Spray SpA based inRoncello (MB), ITALY
This is deposited onto a substrate; moving the substrate allows the melt pool to solidify and thus produces a track of solid metal. Typical applications are: - Droplet erosion protection in steam turbine LP blades - Corrosion protection for boiler components (thermocouples, etc.) - dimensional restoration of gas turbine ...
by:Magaldi Green Energy based inRoma, ITALY
STEM® (Solar Thermo-Electric Magaldi) is a patented concentrating solar technology, which uses a mirror system to concentrate the sun's light energy on a receiver and convert it into heat. The heat can be used to power industrial thermal processes or to drive steam turbines to produce electricity. The STEM® technology contains a TES (Thermal Energy ...
Manufactured by:John Crane Corporate based inChicago, ILLINOIS (USA)
Through the careful application of materials and technical improvements, John Crane designs and manufactures enhanced thermoplastic and metallic labyrinth seals that facilitate a reduction in running clearances, improved safety, increased efficiency and reliability for critical equipment. Our business is serving customers' needs for the design manufacture and repair of compressor seals for ...
Manufactured by:Coes s.r.l. based inStezzano, ITALY
Since 2011 Shell & Tube heat exchangers have been added in COES range of products, in order to satisfy Customers needs. They are engineered and manufactured following “project-based” philosophy complying with major standard codes and client specifications. Hundreds of units have been thermally selected, mechanically calculated, engineered and designed, then manufactured and ...