- Home
- Equipment
- canada alberta
- up control room system
Show results for
Refine by
Up Control Room System Equipment Supplied In Canada Alberta
23 equipment items found
Manufactured by:Urecon Ltd based inCoteau-du-Lac, QUEBEC (CANADA)
Urecon manufactures a complete line of high temperature systems up to 150°C (300°F). Common applications include campus style heating, condensate return piping and low pressure steam ...
Manufactured by:Nucor Skyline Steel , LLC based inRock Hill, SOUTH CAROLINA (USA)
The HZ Combined Wall System was introduced by Arbed in 1972. As with all of their sheet pile sections, Arbed, Arcelor/ArcelorMittal continued to develop the best product possible and in the late 2000s came up with the current system. A connector is threaded at the end of the flange of the HZM king pile. The intermediary AZ piles are then threaded onto the connectors between two HZM piles. ...
Manufactured by:Daemar Inc. based inOakville, ONTARIO (CANADA)
Metric Size O-Rings in buna material. Cross Section can be found from 1mm up to 8.4mm. Numbering system is ID x Cross Section: Eg 5mm ID x 1mm Cross Section = 5-1MM. Buna (Nitrile/NBR), 70 ...
Manufactured by:Discover Battery based inCalgary, ALBERTA (CANADA)
Energy Storage Tubular Flooded OPzS batteries are designed for reliable energy storage in stationary applications such as UPS systems, industrial backup, telecom networks, and renewable energy frameworks. These batteries leverage OPz Tubular Plate Technology to offer excellent deep-cycling capabilities and efficient energy recovery from deep discharge and frequent Partial State of Charge ...
Manufactured by:Thomson Power Systems member of Regal Beloit Corporation based inMississauga, BRITISH COLUMBIA (CANADA)
Series 2200 generator control switchgear line represents 40 years of product development and system design ...
by:Sirius Instrumentation and Controls based inALBERTA (CANADA)
Apollo Solar Power Packs by Sirius are engineered to provide reliable power solutions for remote locations where conventional grid power is inaccessible or where a zero-emission energy source is preferred. Custom-manufactured to endure the demanding conditions of the oil and gas industry as well as harsh northern climates, these solar power packs are a leading choice for emission reduction and ...
Manufactured by:Schneider Electric based inLoves Park, ILLINOIS (USA)
Straight length, Powerbus busway, max 100A rated, 600VAC, 3 phase, 3 wire, 3A config, ...
Manufactured by:ABB based inZurich, SWITZERLAND
PowerValue represents an accurately balanced combination of unmatched reliability, excellent electrical performance, exceptionally compact size and outstanding cost-effectiveness housed in an attractive ...
Manufactured by:AMETEK Solidstate Controls based inColumbus, OHIO (USA)
The Digitally Controlled Ferroresonant UPS system combines the best of both worlds - the reliability and robust design of an industrial ferroresonant UPS, and the digital control and communications typically found only in PWM products. It is a true on-line, double conversion UPS system that provides continuous, clean regulated power for critical AC loads. This UPS is designed specifically for ...
Manufactured by:Canadian Solar Inc. (CSI) based inWest Guelph, ONTARIO (CANADA)
With Canadian Solar’s proprietary poly wafer and cell technologies we have developed an extraordinary module. HiKu is the first poly module exceeding 400 W and thus reaches one of the highest poly module power outputs in the solar industry. Combining the best technology and design, it also reduces LCOE and installation costs. ...
Manufactured by:AMETEK Solidstate Controls based inColumbus, OHIO (USA)
The DSE UPS from AMETEK Solidstate Controls combines the best of both worlds - the reliability and robust design of an industrial ferroresonant UPS, and the digital control and communications typically found only in PWM ...
Manufactured by:AMETEK Solidstate Controls based inColumbus, OHIO (USA)
The Digital ProcessPower® (DPP) UPS from AMETEK Solidstate Controls is a true on-line, double conversion Uninterruptible Power Supply system that provides continuous, clean, regulated power for critical AC loads. This unit is a single-phase, 5-100 kVA, though additional sizes are ...
Manufactured by:AMETEK Solidstate Controls based inColumbus, OHIO (USA)
The DVS Series are industrial voltage stabilizers, intended for use in the bypass path of an uninterruptible power supply (UPS) system or as a stand-alone system. Each unit integrates a precision line voltage regulator and a shielded isolation transformer in a single system ...
Manufactured by:AMETEK Solidstate Controls based inColumbus, OHIO (USA)
The Digital ProcessPower® (DPP) UPS from AMETEK Solidstate Controls is a true on-line, double conversion Uninterruptible Power Supply system that provides continuous, clean, regulated power for critical AC loads. This unit is a single-phase, 5-100 kVA, though additional sizes are available. This UPS is designed specifically for process control and industrial applications, The DPP systems ...
Manufactured by:AMETEK Solidstate Controls based inColumbus, OHIO (USA)
The Digital Power Factor Corrected (DPF) UPS from AMETEK Solidstate Controls is a true on-line, double conversion uninterruptible power supply system that maintains similar features as the DPP ...
Manufactured by:AMETEK Solidstate Controls based inColumbus, OHIO (USA)
The Digital ProcessPower® (DPP) UPS from AMETEK Solidstate Controls is a true on-line, double conversion Uninterruptible Power Supply System that provides continuous, clean, regulated power for critical AC loads. This unit is a three phase, 10-225kVA, though additional sizes are available. This UPS is designed specifically for process control and industrial applications. The DPP systems ...
Manufactured by:OutBack Power Technologies, Inc based inCommerce, TEXAS (USA)
OutBack’s pre-assembled and pre-wired FLEXpower systems are equipped with the OutBack FXR / VFXR™ Series inverter/chargers. This means that the most advanced inverter features are now available on the industry’s most trusted and proven systems platform, for unmatched flexibility and ...
Manufactured by:AMETEK Solidstate Controls based inColumbus, OHIO (USA)
The Digital Battery Chargers (DCR) from AMETEK Solidstate Controls are thyristor-based systems. They are, designed for high efficiency conversion of incoming commercial AC to DC power for charging batteries, while supplying power to continuous DC loads, such as Inverters. This solid-state design utilizes SCR phase control to provide regulated DC output and limited current via a smoothing filter. ...
Manufactured by:OutBack Power Technologies, Inc based inCommerce, TEXAS (USA)
OutBack’s pre-assembled and pre-wired FLEXpower systems are equipped with the OutBack FXR / VFXR™ Series inverter/chargers. This means that the most advanced inverter features are now available on the industry’s most trusted and proven systems platform, for unmatched flexibility and ...
Manufactured by:OutBack Power Technologies, Inc based inCommerce, TEXAS (USA)
The latest, most advanced features on the industry’s most trusted and proven platform—that’s the essence of OutBack’s new FXR™ Series of Grid/Hybrid inverter/chargers. Capable of off-grid or grid-connected operation in a single model, the FXR Grid/Hybrid inverter/chargers provide system designers with unprecedented flexibility and compatibility for nearly any power ...