Refine by
Vapors Equipment Supplied In United Arab Emirates
25 equipment items found
Premium
Manufactured by:AlyTech based inJuvisy sur Orge, FRANCE
AlyTech's cutting-edge solution addresses these issues head-on, delivering a seamless experience that boosts productivity, enhances safety, and elevates your quality assurance standards. Our advanced standalone vaporizer is specifically designed for laboratory use, enabling safe, repeatable vaporization of LPG or other liquefied gases. Perfectly suited for ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON offers our own WILDCAT natural gas compression systems for wellhead applications as rental or lease equipment. Through testing, we can identify flow improvement up front and determine the appropriate standard system for your gas compression and budgetary needs. AEREON's gas compression systems have been used successfully for many years. Systems installed on coal bed methane wells, gas ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
With the roll out of Quad O regulations in the USA, crude/condensate tank batteries and well pads are required to conform to reduced emission levels if they have the potential to emit over 6 tons of VOC per annum. One of the three emission control end-of-line devices can be used: Flares, Enclosed Combustors or ...
Manufactured by:GIG Karasek GmbH based inGloggnitz, AUSTRIA
The thermal vapor recompression (TVR) builds on the same principle as the mechanical alternative, but uses only a portion of the resulting vapor for heating the system. The compression of the steam for heat recovery takes place in a steam jet pump. This is usually designed for a specific operating point and works on the jet pump principle. A certain amount of ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Whenever a process requires that entrained droplets be removed from a vapor stream, a knockout drum should be integrated into the system. Condensation can occur when hot process gases cool considerably in the flare gas header and riser, and some gases also go to dew point at ambient temperatures and pressures and can therefore generate liquids. ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
One of the three emission control end-of-line devices can be used: Flares, Enclosed Combustors or VRUs. When enclosed flames and smokeless combustion are required for low pressure tank vapors, or other VOC destruction applications, AEREON's GHOST series of standard design enclosed combustors provides EPA-Certified performance, full stainless steel construction, and an economical ...
Manufactured by:CECO Environmental based inAddison, TEXAS (USA)
Our HEE-Duall brand Bio-Reaction Biogas Oxidizers are reliable and durable systems that utilize three stages of biological activity to digest variable concentrations of vapor phase volatile organic compounds (VOCs) and odorous compounds: Bio-Trickling chamber, Bio Matrix chamber, and an extended, aerated, waste water treatment chamber. Our systems can be designed and sized to ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Often coupled with a pit liner, our pit flares can be a cost-effective combustion option for an environmentally conscious user. Our high efficiency burner produces a mixture of vapor and liquid from a single source. While most often designed to operate nonsmokeless, through use of AEREON's various Pit Flare technologies (Chimera, Peackock, Triton), smokeless operation can often ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Certified Ultra-Low Emissions Burner (CEB) is an ultra-low emissions vapor device that utilizes premix surface combustion to effectively combust waste gases in a compact footprint. With VOC destruction efficiencies of up to 99.99% and a NOx emissions guarantee of ≤ 15 ppmv at 3% oxygen, carbon monoxide emissions guarantee of, smokeless operation and no luminous flame, the ...
Manufactured by:HASLE Refractories A/S based inRoenne, DENMARK
HASLE manufactures precast modular elements developed by our own technicians in our plant in Denmark. We offer to design and manufacture customer-specific elements in close collaboration with the customer and based on requirements like ease of assembly, durability and thermal ...
Manufactured by:New Instruments and Research for Analysis (NIRA) S.r.l. based inBiassono (MB), ITALY
Multi-line automatic air recirculation control for energy saving and flow rate reduction for air treating systems Infrared LEL monitoring ...
Manufactured by:TG-Machines Sp. z o.o. based inOstrowiec Swietokrzyski, POLAND
The paddle dryer is suitable for heating, drying, cooling, and sterilizing materials for various industrial applications. The machine uses conductive heat with a horizontal mixing mechanism, so continuous operation is possible to maximize production ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMont-Royal, QUEBEC (CANADA)
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMont-Royal, QUEBEC (CANADA)
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
Manufactured by:PermAlert, a division of Perma-Pipe, Inc. based inNiles, ILLINOIS (USA)
The PHLR series probe is a resettable hydrocarbon probe that detects hydrocarbon liquids in interstitial spaces of tanks and pipes, sumps and other containment areas where hydrocarbon liquid can accumulate to a depth of ¼” or ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Model 100 Continuum Ignitor utilizes a high voltage electric arc to ignite a combustible air/gas mixture. This arc typically occurs every 20 seconds for a two second duration (timing is adjustable). The Continuum provides a spark inside a ‘slipstream’ chamber that diverts a portion of the waste gas to create a combustible air/gas mixture. This allows the Continuum ignitor to ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). Utility flares therefore, do not require auxiliary gas streams or assist air; two mediums normally used to ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary Starfire burner, optimizing gas and air mixing. ...
Manufactured by:Air Products and Chemicals, Inc. based inAllentown, PENNSYLVANIA (USA)
Biogas is the production of methane from anaerobic digestion of farm wastes, manure, or municipal waste. Biogas contains high concentrations of carbon dioxide, hydrogen sulfide, and other impurities which need to be removed to make the methane commercially viable. The purified biomethane is used to generate heat and power, compressed for powering vehicles, or fed directly into the natural gas ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's Cyclone Series Air-assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to eventually combine with the process gas, which passes through its own secondary riser and is distributed at the flare tip through a proprietary AEREON Starfire burner tip. Upon mixing at the flare ...