- Home
- Equipment
- netherlands
- voltage controller
Refine by
Applications
- Transformer for Railway
- Transformer for Power Transmission
- Hybrid Solutions for Solar and Wind Power Systems
- Wind Power Energy Solutions for Off-Grid Wind
- Energy Solution for Power Resilience
- Energy Solution for Reducing Energy Bills
- Energy Solution for Battery Buffered EV Charging
- Automated Welding Equipment for Nuclear
- Automated Welding Equipment for Renewable Energy
- Transformers and Inductors for EV-Electric Vehicles - Automotive Electronics
- Transformers and Inductors for Photovoltaics & Energy Storage
Voltage Controller Equipment & Supplies In In Netherlands
435 equipment items found
Manufactured by:Ensto Group based inPorvoo, FINLAND
Ensto Voltage Controller is a cost-efficient solution for correcting unwanted voltage variation in low voltage 1-phase networks. It is installed close to the consumer connection point, where it measures the feeding line voltage and automatically stepwise increases or decreases the output voltage. ...
Manufactured by:Schenck Process UK Ltd. based inGloucestershire, UNITED KINGDOM
With its high speed Digital Signal Processor (DSP) and full color LCD graphics interface, the AVC XM represents the state of the art in TR voltage controls for ESPs. Not only does the DSP allow for greater stability and accuracy, it provides a new level of advanced diagnostics, allowing users to find and fix ESP problems faster and easier without an oscilloscope, ...
Manufactured by:NIHON DEMPA KOGYO CO., LTD. based inSchaumburg, ILLINOIS (USA)
Low jitter : Typ. 130fs rms (@ 622.08MHz). Five types of output : CMOS, LVPECL, LVDS, CML, HCSL. Supports low power supply voltage:+1.8V, +2.5V, +3.3V. Selection of frequency control range : 9 ranges (±50×10-6 to ...
Manufactured by:Nanjing CUH Science & Technology Co., Ltd based inJiangning, CHINA
Soft Start: The controller will gently increase output voltage from 0 to the preset value when power on to avoid sudden shake. Fuse-Short Circuit Protection: If output of the controller is short-circuited the fuse inside will be blown to protect the controller and the load. ...
Manufactured by:Benshaw Inc. based inPittsburgh, PENNSYLVANIA (USA)
Benshaw’s CFMVRMX Series Soft Starter is a fully integrated, programmable family of Class E2 load break/combination solid state starters. This integrated design includes control and power electronics, bypass and isolation contactors that reduce maintenance and operating costs when compared to other ...
Manufactured by:Benshaw Inc. based inPittsburgh, PENNSYLVANIA (USA)
For large motor soft start applications, Benshaw CBMVRX Series Soft Starters provide a circuit breaker solution for isolation and protection. Starting from this powerful base, Benshaw’s engineering team will develop a custom solution for your specific large motor application. We offer the flexibility of using existing switchgear, or we can source new switchgear from any major vendor ...
Premium
Manufactured by:AB Micatrone based inSolna, SWEDEN
The MS-35M actuator is intended for controlling dampers, guide rails, etc. in control and control systems. Connection can be made to control systems, two-position controllers, 3-point controllers and together with servo regulator also to continuous ...
by:Genevos SAS based inLagord, FRANCE
PERFORMANCE: Continuous Power 13.5 kW, Output Voltage (Controllable) 48 V dc, Peak Efficiency 52 %, FC Stack Estimated Lifetime >20,000 hrs, HPM Design Life 25 ...
by:Genevos SAS based inLagord, FRANCE
PERFORMANCE: Continuous Power 78 kW, Output Voltage (Controllable) 400 – 900 V dc, Peak Efficiency 55 %, FC Stack Estimated Lifetime > 20,000 hrs, HPM Design Life 25 ...
by:Genevos SAS based inLagord, FRANCE
PERFORMANCE: Continuous Power 40 kW, Output Voltage (Controllable) 230 – 450 V dc, Peak Efficiency 54 %, FC Stack Estimated Lifetime >20,000 hrs, HPM Design Life 25 ...
Manufactured by:Regal Rexnord Corporation based inBeloit, WISCONSIN (USA)
Speedmaster DC drives for use with SCR rated motors. Models range from sub-FHP through 3 HP. NEMA® 1, NEMA® 4/12 and NEMA® 4X enclosures available. Low voltage controls available through 120 amps @12/24 V and 100 amps @ 36/48 ...
Manufactured by:Probe-A-Load, Inc. based inWest Liberty, IOWA (USA)
Compact control can be adapted for use either inside or outside the scale house. Fingertip touch easily operates all functions. Indicator lights also allow the operator to control traffic at the probing area. Low voltage control engages each operation with switching relays located on the mast of the probe. ...
Manufactured by:Uponor Ltd. based inMississauga, ONTARIO (CANADA)
Powered zone controllers include transformers for low-voltage operations and relays to operate line-voltage controls. Fully fuse-protected, they also include an isolated end switch and built-in domestic hot water (DHW) priority switch. The indicator lights show full functionality of the products wired to the ...
Manufactured by:BAUR GmbH based inSulz, AUSTRIA
The ATG 2 burn down transformer is used for impedance reduction of cable faults in low- and medium-voltage networks. The short-circuit proof 2300 VA stray field transformer delivers a maximum voltage of 10 kV and is housed in a fully enclosed 19” housing. Portable device for changing the fault resistance, Useful for cables that are difficult to ...
by:InAccess based inLondon, UNITED KINGDOM
Active & Reactive power / Voltage control, Grid compliance, Ancillary Services. An intelligent vendor-independent system ...
Manufactured by:BAUR GmbH based inSulz, AUSTRIA
The high performance ATG 6000 burn down transformer is used for impedance reduction of cable faults in low- and medium-voltage networks. The short-circuit proof 5.75 kVA stray field transformer delivers a maximum voltage of 15 kV and is housed in a fully enclosed 19” housing. Proven methodes for cable faults that are difficult to locate, Useful for ...
Manufactured by:Atriy Electronic Appliances Trading LLC based inDubai, UNITED ARAB EMIRATES
odestar FM-CS is a universal device for registration and analysis of fault processes in a network of any topology and neutral type. Lodestar FM-CS can be used as a logger, fault current indicator, high-voltage control device. It could be installed on the control board of relay compartment of a switchgear of any type on panels and ...
Manufactured by:BaSyTec GmbH based inAsselfingen, GERMANY
Test systems of the HPS-HR series are based on a highly modular amplifier design. Voltage and currents can be adapted to your requirements. Currents up to 600 A, voltages up to 70 V and a maximum power of 6 KW are possible for a single channel. Additionally the power and current can be increased by parallel connection of up to 4 Channels (Up to 2400 A). As an ...
Manufactured by:Tecloman based inMunich, GERMANY
Enhanced reliability with independent electrical and battery spacesfor commercial battery storage. Versatile application in peak cut, new energy consumption, dynamic expansion, and low voltage control ...
Manufactured by:Megger based inDallas, TEXAS (USA)
The SMRT1, 1D and 1B single-phase relay test system are units that combine high compliance voltage with high current to test electromechanical, solid-state and microprocessor-based overcurrent relays, including voltage controlled, voltage restraint, and directional overcurrent. Furthermore, it has the same IEC 61850 capabilities ...