Refine by
Voltage Monitoring Cvm System Equipment & Supplies
35 equipment items found
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
In view of cell spacing of less than 1 millimetre in modern fuel cells, cell contacting poses a particular challenge. Furthermore, the different designs of the fuel cell stacks, whose bipolar plates provide different contact surfaces for harnessing the potential. For this reason there is no standard contacting unit. A CVP is basically an individual development, tailor-made for the electrochemical ...
Manufactured by:Kolibrik.net based inZdar nad Sazavou, CZECH REPUBLIC
Stackable cell voltage monitoring (CVM) system designed for H2 fuel-cell stack research, testing and applications. CVM system can be used to prevent damage to individual cells, to monitor lifetime conditions, and to ensure optimal working conditions in applications. ...
Manufactured by:Kolibrik.net based inZdar nad Sazavou, CZECH REPUBLIC
Stackable cell voltage monitoring (CVM) system designed for H2 fuel-cell stack research, testing and applications. CVM system can be used to prevent damage to individual cells, to monitor lifetime conditions, and to ensure optimal working conditions in applications. ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
The process modules add numerous functions to the CVM systems from SMART TESTSOLUTIONS. They offer synchronous data rates of up to 400 x 1 kHz per channel via the LVDS bus, a high-speed connection to the PD via Ethernet and bus interfaces (EtherCAT, CAN, ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
The CVM systems with MASTER feature comprehensive functionalities and high-speed data transmission and processing. A complete system consists of the number of CVM G5 measuring modules required for the respective application, a bus module, a termination module and a process module. Adding the process modules Master or SlimMASTER to the measurement module stack enables more comprehensive as well as ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
In addition to standard test signal cables, we also offer customised high-voltage wiring harnesses and adapter cables for your project. All wiring harnesses are manufactured in top automotive quality in our wiring harness factory in ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
The CVM G5S module was specially developed for cell voltage monitoring in series production vehicles. The performance features are limited to the range of functions actually required in series production. At the same time, the single-board solution offers high robustness in long-term operation and a production volume relative cost ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
For the commissioning and testing of cell voltage measurement electronics and FuelCell control units, and in particular for the software testing of such ECUs, it is necessary to simulate cell-specific voltage values. The simulation modules of the MCM IntelliSim series, in conjunction with a master module enable active simulation of a fuel cell stack without the need to integrate a real stack into ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
The G6S CVM solution was specially developed for cell voltage monitoring in series applications. It is scalable, allowing both single cell measurements and voltage measurements across two or four cells. The measurement modules are supplemented by a target market-specific head module, which is equipped with the data interfaces prevalent in the respective target market. The head module also offers ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
The CVM measurement modules for precise cell voltage measurement on fuel cells, batteries and electrolyzers have proven themselves hundreds of times and deliver reliable measurement results even in harsh field conditions. Thanks to a variety of interfaces, they can be used excellently with common PC systems as well as in embedded systems. For processing the measurement signals and combining them ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
Modular system for end-of-line testing of battery systems including BMS controller. Test of cell behaviour and BMS functionality. Power supply, safety technology and components such as insulation monitors and measuring devices, voltage and current measuring components are housed and wired separately from the application module in the test system cabinet. Defined safety mechanisms ensure that ...
Manufactured by:Time Mark Corporation based inTulsa, OKLAHOMA (USA)
The 16-1-H-P Voltage & Frequency Monitor by Time Mark Corporation is engineered to safeguard equipment from damaging over, under, or rapid cycling voltage conditions. This model offers the flexibility to adjust or disable trip and restart delays, accommodating input voltage ranges of 12-30 VAC/VDC or 30-277 VAC/VDC. Designed for both 8-pin plug-in and surface mount configurations, the device ...
Manufactured by:ALTRANS Energies SAS based inMartyrs, FRANCE
Designed for monitoring low voltage (LV) equipment, our innovation addresses the challenge of detecting partial LV discharges, which are not easily visible at long sensing ranges due to the relatively low voltage. This is achieved through the implementation of the following concept using RODECIN© software: a waveform is emitted and, as it propagates through the LV network, it interacts with ...
Manufactured by:RS ISOLSEC SAS based inCepoy, FRANCE
RS ISOLSEC specializes in the design and manufacture of low and medium voltage transformers aimed at enhancing the precision in measurement and protection applications. Their product line includes single-phase voltage transformers, known for their reliability and performance in varying electrical environments. These transformers are integral to electrical networks, ensuring accurate voltage ...
Manufactured by:Chongqing Blue Jay Technology Co.,Ltd based inChongqing, CHINA
ZJS-102 Insulation monitoring system is a highaccurate and secure online monitoringequipment for DC system insulation. It isdesigned for the measurement of differenttypes of ground fault, insulation decreasing,AC signal interruption, DC signal interruptionand so on. Monitor detect DC leakage current, mixed withbalanced & unbalanced bridge detectionmode, can display leakage current of each ...
Manufactured by:ADTEK ELECTRONICS CO., LTD. based inNew Taipei City, TAIWAN
Measuring high DC voltage, suitable for solar system voltage measurement. Output range programmable by DIP switch. Low output ripples. Resistant to high impulse voltage & surge protection. High stability & low ...
by:TECG Control Pte Ltd based inPaya Lebar, SINGAPORE
Excitation systems are fundamental to the operation of modern synchronous machines. It is responsible for supplying direct current for the synchronous machine field windings. Well-designed excitation systems provide reliability of operation, stability and fast transient response. For synchronous generators, it is responsible for maintaining a constant terminal voltage. For synchronous motors, it ...
Manufactured by:Metrel d.o.o. based inHorjul, SLOVENIA
The MI 3295 Step Contact Voltage Measuring System is a voltage measuring system intended for testing and verification of protective earthing of power stations, substation and other power systems. The system consists of Station for current generation and autonomous voltage Meter. Due to high test current (up to 55 A) and effective noise cancellation the MI 3295 ensures very accurate and stable ...
Manufactured by:Zhuhai Pilot Technology Co., Ltd. (Pilot) based inZhuhai, CHINA
SPM91 is a single phase configuration energy meter suit for AC LV voltage system. It’s very easy to install with DIN rail. Suitable for house building, commercial building, switch board room, power distribution Box etc ...
by:OMICRON Energy Solutions Private Limited based inNew Delhi, INDIA
The CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode: up to 64 A / 860 VA per channel) with a great dynamic range, make the unit capable of testing even high-burden electromechanical relays with very high power demands. The CMC 356 is the first choice for applications requiring the highest versatility, ...