Normit - Tube Heat Exchanger

Tubular heat exchangers are used for heat and thermochemical processes between the various types of liquids, gases - (not modified). Heat exchangers may be used as radiators, condensers,evaporators etc.

• Yogurt
• Confectionery products

• Heat
• Heating
• Aseptic cooling
• Deep cooling
• Crystallization
• Dissolution
• Sterilization
• Pasteurization
• Polymerization
• Consolidation

The product is transferred into the barrel through the heat exchanger tubes from the bottom  tangentially upwards. At the same time the hot / cold liquid is delivered to the system transferred in the counter in narrow  annular channels. Rotational scrapers deducted product inside and outside the cylinder wall, which provides a uniform heat load of the system. Improving the efficiency of heat transfer is reached by increasing the speed of hot / cold cooling liquid. The product yield goes through the upper tube. To achieve requested product quality and performance,rotor speed may vary.

Can be provided in two ways:

• Manual control is designed for simpler machines and technological equipment, which the technological process is not complicated and therefore do not require complicated programming. It is simple operation by using the ON / OFF button.

•  with an automatic control (PLC), which is designed for more sophisticated machines, equipment and production lines, where is necessary to record the temperature, the temperature sensing, alarm the limit parameters, capture multiple variables, the automatic dosing, level control, time setting, monitoring etc.. In the automatic control may be copied records to a PC, there is also the ability to connect and touch screen or connect to Ethernet.

The tubular heat exchangers consist of a bundle of tubes, placed in the tube, from boards, in sheats, tubes and supports. Piping and the space of tubes are separated in these facilities, each from each other and each of them can be divided by partitions into several parts.

Area with heat units can range from hundreds to several cm2 to the several thousand m2. It means that the condenser of steam turbine of 150 MW consists from 17,000 tubes  with a total heating surface is about 9000 meters2

 A wide range of heat exchangers NORMIT allows to choose such a heat exchanger that meet the requirements of any production process.

• Reliability
• High efficiency
• Density
• Wide range of applications
• Quick and highly efficient product handling
• Effective heat transfer with continuous scratching the surface. Continuity of process eliminates burnt or freezing
• Large area of heat in a small space
• Careful handling with the product, which eliminates damage
• Easy Maintenance
• Quick and easy to change wipers
• High hygiene - completely eliminate hard-to-reach areas
• Can be combined with CIP washing
• Inspection and maintenance without removing the heat exchanger
• The lid can be opened with clamps
• Tangential inlet
• Acceleration and deceleration
• Lower costs compared to similar models
• Highest quality materials: All parts are made of stainless steel of the highest quality
• Also operates at high temperature
• Reliable operation
• Safety
• Minimum Product Lost

• Single phase flow, the hot and cold side heat exchanger with vertical or horizontal installation
• Pressure range from vacuum to high values
• Different possibilities of pressure on both sides of the large number of options
• Satisfy of requirements of heat, without having to significantly increase the costs of facility
• Size from small to large heat exchangers (5,000 m 2)
• Possibility of using different materials in accordance with the requirements for cost, corrosion, temperature and pressure
• Use of advanced heat transfer surfaces inside and outside the tube, various promoters, etc.
• Ability to extract pipe cleaning and repair

• Margarine
• Toppings
• Cream
• Marinades
• Peanut Butter
• Animal and vegetable fats
• Spreads
• The soft butter
• Jams
• Chocolate
• Caramel
• Ketchup
• Mayonnaise
• Fillings
• Whipped
• Pudding
• Baby Food