chp engine Articles

  • CHP efficiency for biogas

    Combined heat and power plant efficiency is a function of the conversion efficiency of the energy in the fuel gas to useful energy in the form of electricity and heat. A combined heat and power (CHP) plant is typically a reciprocating gas engine that uses the energy in the gas to drive a crank shaft. The crank shaft turns an alternator to ...


    By Clarke Energy

  • Combined Heat and Power (CHP) essentials

    'CHP essentials' introduces the concept of power and heat 'production possibility sets', starting at the cradle of CHP, i.e., the thermal power generation plant. The latter always occasions 'fatal' heat that is either recovered (the 'merit' of CHP) or wasted (condensing). This split paves the way to defining the production possibility sets of CHP plants, shown for steam turbines, internal ...


    By Inderscience Publishers

  • Greenstars portable monitoring for CHP and flares

    Greenstar’s award-winning KTK landfill site in Kilcullen, Co. Kildare, is unusual in Ireland in that it has three gas engines feeding electricity to the grid and two flares. In Ireland, while flaring is common, engines are not. The flares are run in tandem with engines so that if an engine is ramped down for repair or service, the flare ramps up automatically. All are supplied by 122 ...

  • Maize Products Biogas CHP Gujarat - Case Study

    With a legacy of over seven decades, Maize Products has exemplified corn milling from a modest 1 tonne/day of crushing in the year 1941 to a crushing of 650 tonnes/day today. Honoured with the National Award for Import Substitution in the year 1976, Maize Products actively contributes in the research and development of starch & starch derivatives. Harnessing renewable energy, Maize Products ...


    By Clarke Energy

  • The Francis Crick Institute CHP Plant - Case Study

    The Francis Crick institute is being built in central London next to St Pancras International station. By bringing together scientists from all disciplines, it will not only help to improve people's lives but will also keep the UK at the forefront of innovation in medical and bioscience research, attract high-value investment, and strengthen the economy. Francis Crick was one of Britain’s ...


    By Clarke Energy

  • Dundee University CHP Plant - Case Study

    The University of Dundee set the standard for the development of a university energy efficiency scheme two decades ago, allowing Clarke Energy to expand the technological reach of our business and install our first ever combined heat and power (CHP) plant. Not only was the University of Dundee Clarke Energy’s first natural gas ...


    By Clarke Energy

  • Quantifying Combined Heat and Power (CHP) activity

    In CHP plants without heat rejection facilities power, output is complementary to the recovery of heat, and all activity is cogeneration. CHP plants with heat rejection facilities can operate a mix of cogeneration and condensing activities. Quantifying the energy flows of both activities properly requires knowledge of the design power-to-heat ratios of the CHP processes (steam and gas turbines, ...


    By Inderscience Publishers

  • Greenstars portable monitoring for CHP and flares case study

    Greenstar's award-winning KTK landfill site in Kilcullen, Co. Kildare, is unusual in Ireland in that it has three gas engines feeding electricity to the grid and two flares. In Ireland, while flaring is common, engines are not. The flares are run in tandem with engines so that if an engine is ramped down for repair or service, the flare ramps up automatically. All are supplied by 122 landfill gas ...

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) Date Commissioned: Q2 2012 ElectraTherm installed a Green Machine in Germany at a ...


    By ElectraTherm

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) ElectraTherm installed a Green Machine in Germany at a biogas power generation ...


    By ElectraTherm

  • Exergy and exergoeconomic analysis and optimisation of diesel engine based Combined Heat and Power (CHP) system using genetic algorithm

    In the present study, a diesel engine based Combined Heat and Power (CHP) system is optimised using exergoeconomic concept and genetic algorithm. For this purpose, the CHP system is first thermodynamically analysed through energy and exergy. Then cost balances and auxiliary equations are applied to subsystems. Finally an objective function representing fuel cost, cost of exergy loss and ...


    By Inderscience Publishers

  • Boston Scientific, Clonmel, Northern Ireland CHP Project - Case Study

    With more than 25,000 employees worldwide, Boston Scientific is a true giant of the medical industry. They are an industry leader in less invasive surgical technologies. As a group, they manufacture more than 13,000 products at 17 manufacturing facilities around the world. At their production facility in Clonmel they produce pacemakers for the global market. As with most large scale ...


    By Clarke Energy

  • Tronox Namakwa sands furnace Gas CHP Plant - Case Study

    Tronox is the largest fully integrated producer of titanium ore and titanium dioxide in the world. The Tronox Mineral Sands cogeneration power generation plant, located in the Western Cape, uses the waste gas from two open arc DC furnaces as an energy source. The gas engine power plant operates on waste gas ...


    By Clarke Energy

  • Cogeneration experience with Clarke Energy: Carthage Grains CHP Plant, Tunisia

    Carthage Grains is the leader in the Maghreb in the trituration of the soya bean: production of oil and soybean meal. The process of Carthage Grains consumes electrical and thermal energy in the form of steam (30 to 35 tonnes per hour at 12 bar pressure). As the supplier of Nejma Oil (a Clarke Energy customer since 2012), the choice of Carthage Grains for GE’s Jenbacher gas engine ...


    By Clarke Energy

  • CIBSE Event at Kings Cross CHP plant a great success - Case Study

    Clarke Energy showcases GE’s Jenbacher combined heat and power (CHP) engines at the 67 acre, Kings Cross development at Hoare Lea. Hoare Lea is a firm of consulting engineers, specialising in mechanical, electrical and environmental engineering. The event took place on the evening of ...


    By Clarke Energy

  • Tamar Energy’s Basingstoke Biogas CHP Plant - Case Study

    Tamar Energy’s Basingstoke anaerobic digestion (AD) facility is located in Hampshire. It was commissioned in 2013. The AD plant converts food waste into biogas. This renewable fuel generated is used on-site (power and heat) and the electricity is exported to the national grid, reducing carbon emissions while improving the environment. The Basingstoke site is one of Tamar Energy’s ...


    By Clarke Energy

  • Biogas cleaning / conditioning - A requirement for optimal functioning of CHP systems

    Biogas is obtained through the anaerobic decomposition (putrefaction) of organic matter. It contains methane (CH4) in varying proportions, ranging from 35% to 70%, a proportion which largely depends on production methods and the materials involved in the process. This methane concentration is what enables biogas to be used as fuel. The release of methane into the atmosphere contributes to an ...


    By Energy & Waste S.l

  • Emissions and performance of a stationary diesel engine run on biodiesel blends

    This paper presents an investigation into the effect of biodiesel blending on emissions and efficiency in a stationary diesel engine. Rapeseed based biodiesel blended in increments of 25% with fossil diesel. The emissions of CO2 show a decrease in emission (g/kWh) with increased engine load. Within the range of tests carried out, the NO ...


    By Inderscience Publishers

  • VIYELLATEX improves factory efficiency thanks to cogeneration with gas engines

    VIYELLATEX Limited is the composite knit apparel and textile manufacturing business unit of VIYELLATEX group. It started its operations in 1996. The company is comprised of design and product development, sample, knitting, washing, cutting, sewing and finishing sections. The Textile Testing Corporation (Testing Lab) is also a part of VIYELLATEX. It caters to major buyers such as Puma, S.Oliver, ...


    By Clarke Energy

  • Easy payback from biogas monitoring

    There is a strong business case for biogas monitoring and CHP protection. A fixed biogas analyser may cost some £6-10,000 and monitor gas every few minutes day and night. By comparison it can save its own cost many times over by protecting CHP engines from expensive unplanned downtime, biogas engine ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you