- Home
- Equipment
- liechtenstein
- chp engine
Refine by
Chp Engine Equipment & Supplies In In Liechtenstein
37 equipment items found
Manufactured by:IMFsoft, s.r.o. based inOstrava–Mariánské Hory, CZECH REPUBLIC
Independed ignition up to 12 valves for cogeneration units engines. Fuel mixture management based on data from Lambda controller. Flap controll by actuator or stepper motor. Lambda probe Bosch LSU 4.9 for unbeatable prices. ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions. Specially designed for the biogas market, AERZEN biogas blowers of series GM ensure ultimate reliability and ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Gas engines are highly efficient at providing the stimulus for the growth of plants, whilst in parallel providing a flexible supply of electrical power. Heat, light and carbon dioxide (CO2) all promote plant growth. Gas engines provide electrical power at the alternator and when in a cogeneration configuration can also recover useful heat. Carbon dioxide is released in the exhaust gases of the ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Syngas, also known as synthesis gas, synthetic gas or producer gas, can be produced from a variety of different materials that contain carbon. These can include biomass (wood gas), plastics, coal, municipal waste or similar materials. Historically town gas was used to provide a gas supply to many residences in Europe and other industrialised countries in the 20th Century. Gas engines utilising ...
Manufactured by:Scherzinger Pumps GmbH & Co.KG based inFurtwangen, GERMANY
Automobile engines can be converted for use as CHP engines and stationary operation. It is crucial here that the aggregate is permenantly supplied with fresh oil. SCHERZINGER offers you a solution for this: Our oil pumps ensure the necessary pressurization prior to the initial use; they can be used for oil changes, and they assume the bypass flow ...
Manufactured by:SunCoal Industries GmbH based inLudwigsfelde, GERMANY
In addition, SunCoal and the Technical University of Munich have developed an entrained-flow gasifier for the production of syngas from biocoal. Syngas can be used in CHP engines for the generation of heat and ...
by:Colsen International b.v. based inHulst, NETHERLANDS
The installation requires limited maintenance, is equipped with little process control and manages to reduce the amount of H2S in biogas to levels below 50 ppm. These features have a significant positive impact on the life duration and running costs of the CHP engine and efficiently facilitate the upgrade of biogas to natural gas ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS Biogas Dehumidification System (BDS) removes water from biogas, protecting combined heat and power (CHP) engines from corrosion and cavitation. It can be supplied with a heat recovery section, increasing the overall efficiency of anaerobic digestion (AD) ...
Manufactured by:SUEZ Water Technologies and Solutions based inTrevose, PENNSYLVANIA (USA)
Designed to recycle biosolids into methane and valuable byproducts, SUEZ’s advanced anaerobic digestion technologies use bacteria in the absence of oxygen to break down matter to create biogas. The biogas can be combusted or oxidized and used for heating or with a CHP engine to produce electricity and heat; it can also be compressed and used as fuel for ...
Manufactured by:SUEZ Water Technologies and Solutions based inTrevose, PENNSYLVANIA (USA)
Designed to recycle biosolids into methane and valuable byproducts, SUEZ’s advanced anaerobic digestion technologies use bacteria in the absence of oxygen to break down matter to create biogas. The biogas can be combusted or oxidized and used for heating or with a CHP engine to produce electricity and heat; it can also be compressed and used as fuel for ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS Digestate Concentration System (DCS) reduces the volume of digestate from anaerobic digestion while increasing its value. In most situations, it is able to do this using surplus heat from the CHP engine or biogas boiler, which can be used up to four times by incorporating multi-effect evaporation ...
Manufactured by:GGE Power Pvt. Ltd. based inNew Delhi, INDIA
Biogas, sewage gas and landfill gas always contain water vapour in an unsaturated state. During combustion, the water vapor results in considerable corrosion damages to the gas engines. Malfunctions caused by these damages lead to significant downtimes and high repair costs. Removing the moisture from your biogas, using a biogas dehumidifier, will protect your ...
Manufactured by:Alvan Blanch Development Company Limited based inWiltshire, UNITED KINGDOM
The main reason for drying biomass is to increase the combustion efficiency by de-watering the biomass products. The solid biomass system has drawn more attention to utilising waste heat from biomass boilers and CHP engines as a biomass drying process. Further encouraged by various government renewable heat schemes (such as RHI) solid biomass (including solid ...
Manufactured by:Bert Energy GmbH based inLeverkusen, GERMANY
We offer our Bert Franchise Partner various standardized tank sizes from 200-1.500 m³ with special Bert technology. Starting from 9 tons/ day conventional tanks can be more attractive than Bert Mobil solutions. In Germany many 300 m³ tanks have been build for farmers with 150-400 cattle. Other countries have built larger tanks. Bert kw/h output can be adjusted to the customers needs. ...
Manufactured by:Bücker + Essing GmbH based inWillich, GERMANY
Refurbished AT engine, repaired according to RAL-GZ 797. Four-stroke Otto gas engine (250 kW). 8 V-shaped cylinders.Turbocharging: Exhaust gas turbocharger with water-cooled turbine housing. Mixture cooler: two-stage mixture cooling with high and low temperature ...
Manufactured by:Bücker + Essing GmbH based inWillich, GERMANY
Refurbished AT engine, repaired according to RAL-GZ 797. Four-stroke Otto gas engine (190/210 kW). 6 cylinders in line. Turbocharging: Exhaust gas turbocharger with water-cooled turbine housing. Mixture cooler: two-stage mixture cooling with high and low temperature ...
Manufactured by:Bücker + Essing GmbH based inWillich, GERMANY
Refurbished AT engine, repaired according to RAL-GZ 797. Four-stroke Otto gas engine (150 kW). 6 cylinders in line. Engine cooling: water cooled. Water-cooled exhaust ...
by:Nissen Energy A/S based inSkanderborg, DENMARK
Our ambitions are high and we don’t like to waste energy. Together we must strive to achieve the globale goals and with NISSEN energy’s highly efficient gas engine plant (CHP), we ensure that the WWTP can produce as much energy as possible, and become energy neutral for the benefit of both the individual plant’s economy and the environment. ...
Manufactured by:Fleetsolve based inNeston, UNITED KINGDOM
Our CHP is a proven and reliable technology that is powering many high profile buildings in the UK. Registered with the CHPA. A single renewable fuel can produce up to four types of output power, heat , cooling and steam and reduces whole of life energy costs. It has the best carbon reduction benefit to capex ratio of any of the low carbon equipment available on the market ...
Manufactured by:ENERTRAG based inDauerthal, GERMANY
The green hydrogen, which is produced without any CO2 emissions, is already being used under the ENERTRAG Windgas brand to supply fuel cells in emergency power supply units. The hybrid power plant consists of 3 wind turbines of the type Enercon E-82 and two engine CHPs, which can be operated with biogas as well as with a mixture of biogas and hydrogen. Hydrogen ...