Refine by
Coal Power Plant Equipment Supplied In Usa
21 equipment items found
Manufactured by:Aerofin based inLynchburg, VIRGINIA (USA)
Bank of three coils designed to be stackable used to pre-heat combustion air at coal fired power ...
Manufactured by:Thermocouple Technology, LLC (TTEC) based inQuakertown, PENNSYLVANIA (USA)
TTEC's MVD Thermowells are designed for applications where thermowells will be exposed to highly abrasive conditions such as are found in Power Plant Coal Pulverizers. Product life has always been a problem in these applications, where barstock wells can be eroded away within short periods of time. For these difficult applications, TTEC designed ...
Manufactured by:Elliott Group based inChiba-Ken, JAPAN
They are designed for long life, low maintenance, and continuous service in dirty and corrosive applications such as petrochemical plants, refineries, natural gas processing, coal gasification, and power stations. Elliott single stage compressors feature a sophisticated design that meets API specifications for handling demanding ...
by:H2-Enterprises Group Inc based inNew York, NEW YORK (USA)
H2-Industries’s eSTORE uses electricity generated by wind farms and solar plants to produce hydrogen, via electrolyzers, and then, through its proprietary LOHC, allows it to be safely stored and transported where it needed. ...
Manufactured by:RPS Composites, Inc. based inMahone Bay, NOVA SCOTIA (CANADA)
Coal-fired power plants produce boiler flue gases which must be scrubbed of chemicals and particulate before exiting through the stack. The internal and external lining in our FRP headers is virtually unaffected by the acid and high chloride environment inside an FGD tower that eats away at metallic piping. ...
Manufactured by:Analytical Technology - a brand by Badger Meter based inCollegeville, PENNSYLVANIA (USA)
For more than a decade, coal-fired power utility stations across the US have relied on our patented MAPS 20/20® imaging system for reliable bottom ash measurement and control. ...
Manufactured by:Eco Material Technologies Inc. based inSouth Jordan, UTAH (USA)
Coal-fueled power plants use selective catalytic reduction (SCR) and selective non-catalytic reduction (SNCR) technologies to reduce emissions of nitrogen oxides. During operation of SCRs and SNCRs, unreacted ammonia reagent can cause fouling of air heaters and other downstream components of power plant units and ...
Manufactured by:Micronics, Inc. based inPortsmouth, NEW HAMPSHIRE (USA)
Reduces dust emissions and increases ESP efficiency in coal-fired power plants. The Coromax® pulse system is a simple replacement of the existing high voltage power supply. The replacement can be done very fast with a minimum of downtime and does not create additional environmental challenges. Power ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support ...
Manufactured by:Fortera Corporation based inSan Jose, CALIFORNIA (USA)
Calera’s Calcium Carbonate, made from CO2, can be used in a variety of applications. The material is produced as a fine free-flowing white powder. It can function as a supplementary cementitous material (SCM) in traditional concrete mixes where the environmentally sustainable calcium carbonate can replace a portion of portland cement, helping reduce the overall carbon footprint of ...
Manufactured by:FAIST Anlagenbau GmbH based inKrumbach (Schwaben), GERMANY
As an operator of a gas power station you are aware of the challenge: gas power stations are important elements in energy-generation mixes with their stand-by duty and flexibility in power generation in line with requirements. Yet the competition from modern coal-fired power plants and renewable ...
Manufactured by:KWS Manufacturing Company Ltd. based inBurleson, TEXAS (USA)
During the processing of many bulk materials, there is a requirement to cool, heat, or maintain a specific product temperature while conveying the product. The desired temperature fluctuations must be calculated and engineered into the system to accomplish the preferred objectives. KWS Heat Transfer Screw Processors are the perfect solution for these ...
Manufactured by:EES - Environmental Energy Services based inSandy Hook, CONNECTICUT (USA)
CoalTreat® is EES’ fuel chemistry innovation that has proven to be highly effective in mitigating problems attributed to furnace slagging and heat transfer surface fouling in coal-fired utility and industrial boilers. CoalTreat® is applied to the fuel pre-combustion, customized to each plant’s fuels and specific objectives, and has been successfully deployed on several large ...
by:HM3 Energy, Inc. based inGRESHAM, OREGON (USA)
Carbon neutral HM3BiocoalTM works as drop-in coal replacement fuel to extend the lives of existing powder coal plants. It also provides a more environmentally friendly and superior alternative to the white pellets for the export market for use in both coal-fired and biomass-fired power ...
Manufactured by:Ocean Thermal Energy Corporation (OTEC) based inPhiladelphia, PENNSYLVANIA (USA)
Ocean Thermal Energy Conversion (OTEC) is a game-changing technology that leverages the temperature differences in the ocean between cold deep water and warm surface water found in the tropics and sub-tropics, to generate unlimited energy without the use of fossil fuels. It boasts a competitive advantage over alternative sources of electricity production with respect to accessibility, ...
Manufactured by:MTR Carbon Capture based inNewark, CALIFORNIA (USA)
Membrane Technology and Research, Inc. (MTR) offers an advanced CO2 capture solution specifically designed for natural gas combined cycle (NGCC) power plants. This system utilizes a selective exhaust gas recycle (S-EGR) configuration that leverages incoming combustion air as a sweep to pre-concentrate CO2 from 4% to around 20%. This pre-concentration is achieved with minimal energy input, ...
Manufactured by:Tidal Electric Inc. based in, CONNECTICUT (USA)
Offshore tidal power generation (“tidal lagoons”) is a new approach to tidal power conversion that resolves the environmental and economic problems of the familiar “tidal barrage” technology. Tidal lagoons use a rubble mound impoundment structure and low-head hydroelectric generating equipment situated a mile or more offshore in a high tidal range area. Shallow tidal flats ...
Manufactured by:Ducon Technologies Inc. based inNew York, NEW YORK (USA)
Ducon's Selective Catalytic Reduction (SCR) DeNOx, and CO removal Systems features state of the art catalyst technology and controls engineering for easy erection and quick tie-in to new or existing Power Plant. Ducon DeNOx Catalyst is manufactured in China and has been proven in numerous power plant installations including installations in 1000 MW power plants with NOx removal efficiency of ...
Manufactured by:MTR Carbon Capture based inNewark, CALIFORNIA (USA)
This makes PolarCap™ an environmentally friendly option that solely relies on electricity, making it ideal for retrofit applications in coal-fired power plants. The compact, modular design of membrane skids allows these capture systems to be integrated into existing plants with limited space. MTR provides two capture rate ...
Manufactured by:WastAway, LLC based inMorrison, TENNESSEE (USA)
The war on coal and other greenhouse-gas producing fuels has intensified over the past decade. Emissions thresholds and prohibitions against construction of new coal-fired power plants have expedited the search for alternative energy sources that are renewable and ...