Show results for
Refine by
Combustion Control Equipment & Supplies In In Lithuania
248 equipment items found
Manufactured by:LAMTEC America Inc. based inHastings, MINNESOTA (USA)
The BT300 BurnerTronic Series combustion controllers are specially designed for small commercial monobloc burner applications. Optional expansion modules enable systems to be individually configured to meet specific application ...
Manufactured by:FUMIS, By ATech elektronika d.o.o. based inMaterija, SLOVENIA
FUMIS ALPHA is a superior solution for combustion control of stoves, burners and low power ...
Manufactured by:Prei Group based inAlzate Brianza, ITALY
From the cooperation with Ascon Tecnologic the combustion control system (SCC) eCOMB was born. This main application of this analysis system is to monitoring the emission and control the combustion data of boilers powered by methane. It also performs the calculations of efficiency and excess of air ...
Manufactured by:Limpsfield based inBiggin Hill, UNITED KINGDOM
Limpsfield offers its users control panels to accompany our burners. These are designed and built around advanced combustion control equipment which will optimise reliability and performance of the LC burner .Working in close conjunction with the end user we produce and refine comprehensive panel designs to any required specification. Be it a ...
Manufactured by:SteEnova GmbH based inFreising, GERMANY
For industrial power plants, which burns production waste together with other fuels, the combustion zone has to be designed carefully regarding the bandwidth of the heating values of the combustible materials, to avoid restrictions in profitability in the future. The potential of the variability of the endzone of the freeboard in OptiCOM-Boilers can only be used ...
Manufactured by:Dunphy Combustion Ltd. based inRochdale, UNITED KINGDOM
Of all the systems in the boiler house, the advanced design Ratiotronic control unit is one of the most important elements for delivering consistent energy savings and emissions reduction. This sophisticated digital control system provides a range of automatic burner management options including control of variable speed drives, fuel and air trims and operations sequencing for precise, real time ...
Manufactured by:FER Strumenti Srl based inSeregno, ITALY
Oxygen Measurement, Carbon monoxide extractive measurement with electrochemical cell, Temperature measurement, Semi-extractive approach with mounting directly to the stack, Easy installation, Simplicity of ...
Manufactured by:Tulsa Combustion based inSand Springs, OKLAHOMA (USA)
Safety, reliability and flexibility are vital to effective burner management systems. Tulsa Combustion designs and assembles control panels and skids in our own shop, using components as specified by our customers or with wide industry acceptance. We provide self-contained systems or sub-systems to be integrated into a plant’s DCS, for both new ...
Manufactured by:Raadman, Brand of PACKMAN Company based inIsfahan, IRAN
Heat Rated Output : 650-2600 / 559-2237 (kW) / (Mcal/h). NOx Class: Ultra Low ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
LEANOX is a lean-mixture combustion control. It was developed by GE's Jenbacher and has been patented worldwide. The system ensures the correct air to gas ratio under all operating conditions. This has the benefit of minimising exhaust gas emissions whilst maintaining stable engine ...
Manufactured by:RB Technologies based inFrancheville, FRANCE
In situ O2 measurement is crucial in combustion management for industrial furnaces. A controlled stoichiometric oxygen excess is necessary to ensure staff and equipment safety, respect of production demands and efficiency by applying a ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Integral Motor / Pump, Low Inertia / Torque Ratio, Same options as 13x10 Models, Simplicity of Design, High Speed ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Proportional Adjustable Ration Control, Pressure, DP, or Electronic Input, Uses Common Power Supply, Spindle, Slide, Bell Crank, or Geared Wheel Ration Adjusters, 235 to 45,000 lbs. of ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Meets JIC Standards, 5 to 15 Horsepower, 500 to 900 PSI, 60 Gallon Reservoir, 10 to 20 ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Double end, low by-pass leakage, 1 1/2" - 8" bore, bronze bearings, up to 1500 lbs, chrome plated cylinder rod, foot, flange, or pivot ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 13210 Proportlonal-Plus-Reset Hydraulic Controller Is designed for slow-reacting control applications that require stability. A group of controllers are supplied from a separate, but common power supply. The controller has a practical output range of approximately 235 to 45,000 pounds of force at the actuator. Model 13210 accepts pressure or differential ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Five Gallon Reservoir, 125 to 230 PSI, Mounting for Two Controllers, External Pump for Easy Maintenance, 1/2 Horsepower Pump, Meets JIC Standards, 0.8 to 4.0 ...
Manufactured by:LAMTEC America Inc. based inHastings, MINNESOTA (USA)
The CMS offers absolute flexibility in the design and control of your combustion control system. CMS incorporates up to 18 analogue inputs (or 9 failsafe), 41 digital outputs, 60 digital inputs, and 10 channels for actuator/drive control depending upon module hardware configuration. Internally, CMS can provide up to 16 individual ...
Manufactured by:LAMTEC America Inc. based inHastings, MINNESOTA (USA)
The BC300 is a simple burner sequencer for industrial burners in thermal process plants. Designed for burners of all sizes, it can be used on continuous or intermittent operation applications. Control output can be single stage or two stage, with pneumatic or in cycle modulation. Flame monitoring can be ionization with single or twin electrode operation, UV tube, or F152 with ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Integral Power Supply, Pressures up to 930 psi, 5.8 to 14.1 GPM, 3 to 7.5 Horsepower, 35 Gallon Reservoir, Proportional Control, Pneumatic or Electronic Inputs, Manual or Automatic ...