Refine by
Locations
- USA
- Alabama
- Alaska
- Arizona
- Arkansas
- California
- Colorado
- Connecticut
- Delaware
- Florida
- Georgia (Us)
- Hawaii
- Idaho
- Illinois
- Indiana
- Iowa
- Kansas
- Kentucky
- Louisiana
- Maine
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Mississippi
- Missouri
- Montana
- Nebraska
- Nevada
- New Hampshire
- New Jersey
- New York
- North Carolina
- North Dakota
- Ohio
- Oklahoma
- Oregon
- Pennsylvania
- Rhode Island
- South Carolina
- South Dakota
- Tennessee
- Texas
- Utah
- Vermont
- Virginia
- Washington
- West Virginia
- Wisconsin
Applications
- Microsteam - Turbine Power System for Commercial Applications
- Variable Phase Turbine for Industrial Applications
- Microsteam - Turbine Power System for Institutional Applications
- Gasification Unlocks the Value of Biomass and Waste
- 1mw Compact Generator for Critical Infrastructure Support Power Systems
- Solar Power for Single-Family Home Builders
- Solar Power for Multifamily Builders
- Process heating for commercial and industrial functions
Electrical System Equipment Supplied In Usa
397 equipment items found
Manufactured by:KYOCERA Corporation based inKyoto, JAPAN
Kyocera have been developing and manufacturing photovoltaic modules for nearly 45 years. Our modules have been used in countless consumer and commercial applications and in large installations worldwide. Choose from our different range of power classes for the solar modules and find the solution that is a perfect match for your ...
Manufactured by:WOG Group based inLake Worth, FLORIDA (USA)
For the last few years , we have focused on the Biogas based captive power generation projects in decentralised manner. The gas potential is generally available in high organic waste/wastewater water from municipal and industrial both. The produced gas is used to generate the electricity running the DG sets on dual fuel mode by the Operator. Electricity produced can be posted to grid for ...
Manufactured by:Hillphoenix Industrial based inConyers, GEORGIA (US) (USA)
PowerCenters are a completely modularized electrical distribution system in a custom enclosure. Multiple designs allow for either indoor or outdoor installation. Integrated electrical enclosures replace a conventionally built room while reducing footprint and clearance ...
by:BP Solar International Inc based inSunbury On Thames, UNITED KINGDOM
First we invite you to request more information, either by using an on-line request form or by telephoning us. Then we’ll contact you for a preliminary discussion, to assess your electricity needs, understand your goals, and answer your questions. With this information, your BP Solar representative will be able to develop a preliminary offer to determine if the recommended solution meets your ...
by:BP Solar International Inc based inSunbury On Thames, UNITED KINGDOM
First we invite you to request more information, either by using an on-line request form or by telephoning us. Then we’ll contact you for a preliminary discussion, to assess your electricity needs, understand your goals, and answer your questions. With this information, your BP Solar representative will be able to develop a preliminary offer to determine if the recommended solution meets your ...
Manufactured by:Phoenix Energy Products, LLC DBA PEP Solar based inPhoenix, ARIZONA (USA)
A complete, building-integrated photovoltaic solar electric system. Available for concrete tile, asphalt, flat roof membrane, and metal roof tops. We install on and off the roof as PEP Solar has done since ...
Manufactured by:Co-op Power based inFlorence, MASSACHUSETTS (USA)
Multi-Unit Building System projects are solar electric systems that are built, financed, and used by you and residents of your building or broader community. Co-op Power helps you to build cooperatively owned solar arrays that are controlled by local communities, where both the financial benefits and the clean electricity are ...
Manufactured by:Associated Equipment Corporation based inSaint Louis, MISSOURI (USA)
Same features as the 6044. PLUS heavy duty, two-wheel tilt-back cart with 8” wheels and 2 trays. Made in USA of US and Global ...
Manufactured by:Engineered Machined Products, Inc. (EMP) based inEscanaba, MICHIGAN (USA)
The OK1 provides up to 40,000 Btu/h of heat rejection. This rugged and efficient remote-mount unit is perfect for any oil or glycol cooling needs including trucks, off-highway construction vehicles, farm and forestry equipment, etc. It features a variable-speed EMP fan with long-life brushless motor and full reversibility to keep the heat exchanger clean through years of harsh use. The OK1 is ...
Manufactured by:Engineered Machined Products, Inc. (EMP) based inEscanaba, MICHIGAN (USA)
DNCO is an extension of EMP's OilMate™ system. It is a lubrication management system that prevents the degradation of the engine oil and dramatically increases intervals between oil and oil filter changes combined with oil replenishment and oil filter change technologies so you never need to shut down your engine. The system removes a small amount of oil from the crankcase and mixes it with ...
Manufactured by:Associated Equipment Corporation based inSaint Louis, MISSOURI (USA)
Vehicle Battery Systems fitted to modern cars require a complex system to control and maintain the best charge and discharge rates which not only ensures the longest in service life but also that systems such as Stop/Start operate correctly. The 12-0200 gives the operator access to all the functions complicated and time-consuming manufacturer scan tools have to perform the same function but ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard Electric Brakes provide positive stopping and reliable holding of rotating devices on demand-every time. Spring engaged when current is interrupted and electromagnetically relased when voltage is applied, these brakes are designed for maximum flexibility and long, dependable service. Each brake has an easy-to-adjust wear bolt to compensate for friction service wear and extend the life of ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMont-Royal, QUEBEC (CANADA)
For the past 45 years, ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels, and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, steam turbine gland systems, ...
Manufactured by:Eco Electrical Systems, LLC based inReno, NEVADA (USA)
Eco Electrical Systems designs and manufactures cutout and disconnect covers that will fit S&C, AB Chance, ABB, Ohio Brass, and Kearney. We have designs for porcelain and polymer cutouts, non-loadbreak and loadbreak designs. Our ECC-1 is designed for porcelain cutouts and will fit 3 manufacturers and 2 voltage classifications, 15 kV, 110 kV BIL and 27 kV, 125 ...
Manufactured by:Thermal Fluid Systems, Inc. (TFS) based inKennesaw, GEORGIA (US) (USA)
Thermal fluid heaters and hot oil systems are used in industrial applications for safe, consistent, and reliable indirect heating and cooling. In a closed-loop system, the thermal fluid circulates throughout the system, maintaining a steady heat ...
Premium
Manufactured by:F.A.S.T. GmbH - Groupe Claire based inLangenbrettach, GERMANY
Electrical resistance data logger for brandes. District heating pipelines or similar systems. Battery operated, lasts for up to 5 years. Software hs log free and easy to use. Ip66 housing with grommet for the wires. Connecting to brandes system ...
Manufactured by:Cranston Machinery Co., Inc. based inOak Grove, OREGON (USA)
The RapPress is Cranston’s glue system for dry sheeted pulp bales. It is a portable machine, powered by pneumatic and electric systems. The adhesive applicators are mounted into the adjacent wrapper dispenser or folder and the presses are positioned in the strapping station’s conveyor where the wrapper is pressed. ...
Manufactured by:Ideal Electric Company based inMansfield, OHIO (USA)
Synchronous condensers are fundamentally a synchronous motor that is not connected to any driven load. Once started and connected to the electrical system it operates at full leading power factor to put VAR’s into the network to support the system voltage or maintain the system power factor at the desired ...
Manufactured by:Liebrecht Manufacturing based inContinental, OHIO (USA)
Self-contained hydraulic and electrical system. Install smooth wall pipe from 12″ to 36″. Easy conversion from one size bottom to another. Rounded bottom for proper tile support. Automatic tilt for varying ground conditions. Automatic Laser grade control. Hydraulic pushers for coupling of ...
Manufactured by:Midtronics, Inc., based inWillowbrook, ILLINOIS (USA)
Electrical systems are complex and critical to heavy-duty vehicle performance. The BMS-100 Battery Management System enables continuous electrical system monitoring of a heavy-duty vehicle’s entire battery and electrical system while in ...