Refine by
Flare Burner Heads Test Flares Equipment & Supplies
53 equipment items found
Manufactured by:Alternate Energy Systems, Inc. based inPeachtree City, GEORGIA (US) (USA)
Test Flares are used during system setup, and for periodical system tests and maintenance. They represent large loads, and allow the system to be tested under simulated load conditions. AES manufactures standard test flares with 2" or 3" gas lines. Other flares for specific systems are available as customer specials. All AES test flares are equipped with automatic ignition, standing pilot, ...
Manufactured by:Smitsvonk Holland B.V. - a member of the Durag Group based inZoetermeer, NETHERLANDS
Direct ignition of (pilot) burners, flares and other ...
Manufactured by:IGF Biogas based inÅrsta, SWEDEN
Our proprietary gas flares are available in different designs and different sizes depending on your needs and demand. We can supply flares with semi-dark flames, for public places, as well as open flames. The torches can be delivered in complete kits as well as loose parts depending on your requirements. We also have good partnerships throughout the country for assembly, commissioning and ...
Manufactured by:Puti Energy based inPune, INDIA
We supply Flare pilots, Burner pilot and any special pilot used for specific use with High Energy Ignition , flame sensor and Auto control. Long pilot Burner with proven ignition system is our ...
Manufactured by:HK HUICHUAN INTERNATIONAL PETROLEUM EQUIPMENT CO., LTD. based inHenan, CHINA
Diverter manifoldis valve assembly, used for diverting the produced oil and gas to the proper process destination. Oil diverter manifold diverts oil to the burner boom or surge tank, while gas diverter manifold diverts to flare stack or burner ...
Manufactured by:Smitsvonk Holland B.V. - a member of the Durag Group based inZoetermeer, NETHERLANDS
Ignition and control unit for[ pilots burners and lances for ...
Manufactured by:Flare Products Limited based inStewartby, UNITED KINGDOM
The high temperature burner is used for achieving a higher level of flame control and temperature. The flame is much shorter on this type of burner sitting just above the air ports. With this type of burner a temperature of 950 -1000°C can be expected without automatic air control. High temperature burners are generally becoming more widespread and are made of 304 stainless ...
Manufactured by:Flare Products Limited based inStewartby, UNITED KINGDOM
The standard burner is normally used on applications where flame retention time and temperature are not so critical. Typically on this type of burner the size remains constant and quantity increases depending on the gas flow ...
Manufactured by:C-deg environmental engineering GmbH based inKiel, GERMANY
The thermal degradation of organic substances under air exclusion is an alternative to AD plants in order to obtain an energetically utilizable gas from biomass. The wood- and pyrolysis gases resulting from these types of processes have a significantly different composition compared to biogas. Especially the high hydrogen content and the usually high gas temperature have to be taken into account. ...
Manufactured by:National Airoil Burner, Inc (NAO) based inPhiladelphia, PENNSYLVANIA (USA)
NAO also has permanent mounted backup ignitors for burners & ...
Manufactured by:LAMBDA Gesellschaft für Gastechnik mbH based inHerten, GERMANY
The adaption of the flare system to the reduced gas amounts and methane contents is achieved by replacing the flare burner and reducing the combustion chamber diameter. For this purpose, the flare body is disassembled and the ceramic fibre insulation is removed in the lower section of the flare body. A reinforced base plate is then fitted in the flare body; the new thicker insulation module is ...
Manufactured by:Europem N.V based inLier, BELGIUM
Industries will generate Low CV waste gases, which are either difficult to burn or can contain insufficient energy to self-sustain the combustion process. For these applications, Nutara developed the proprietary "ring-of-fire" Flare Tip. This tip has a ring of flame around the central waste gas tip thus ensuring complete oxidation of the low calorific waste gas. Both air assisted and non-assisted ...
Manufactured by:Smitsvonk Holland B.V. - a member of the Durag Group based inZoetermeer, NETHERLANDS
A flame front generator is a system in which a gas/air mixture is introduced at ground level and flows up a one-inch line to the pilot burner. After filling this line with the mixture it is ignited by a spark. The resulting flame travels to the top of the flare where the pilot burner is ...
Manufactured by:Fives I.T.A.S. s.p.a. based inMonza, ITALY
Safety and reliability are crucial for offshore applications. ITAS offshore flares are robust, proven, long-lasting and safe. Designed to comply with the most stringent quality standards, ITAS offshore flares range from simple low-pressure utility flares to the sophisticated “swing-out” liquid burner systems. ...
Distributed by:Environmech Sdn Bhd based inBalakong, MALAYSIA
Enmech Biogas Products:- Biogas Blowers (Side channel Blowers & Lobes Blowers) Biogas Flares Biogas Burners Biogas Dryers Flame Arresters Water ...
Manufactured by:Gastechnik Himmel GmbH based inKorneuburg, AUSTRIA
The series HTF is designed as a works flare (according to TA-Luft) with automatic exhaust temperature control at 1000°C and a dwell of at least 0.3 seconds. ...
Manufactured by:Fives I.T.A.S. s.p.a. based inMonza, ITALY
Multipoint ground flares can manage big quantities of gas without visible flame; the specific design includes burners inside a fenced area to ensure that radiation and heating effects are kept inside. For particular applications, the burners can be installed into a pit without fence. From engineering, fabrication, supervision and training, ITAS multipoint ground flares fit into many ...
Manufactured by:National Airoil Burner, Inc (NAO) based inPhiladelphia, PENNSYLVANIA (USA)
NAO flares pilots have continuously advanced over 70 years of field experience. The original design came from NAO inspirating gas burner technology -- tested in the oil fields, refineries & petrochemical plants of Texas before WWII (World War ...
Manufactured by:LLC Bioprom Kharkiv based inKharkov Region, UKRAINE
The controller allows you to control the process temperature in the industrial and semi-industrial furnaces. Full control of solid fuel feeders and self-cleaning systems. Wide setting ranges of all the controls, which makes it possible to establish optimum operating conditions, virtually all burners operating at different quality pellets. Large and informative TFT-LCD with display of all ...
Manufactured by:Rogue Combustion based inTulsa, OKLAHOMA (USA)
At multiple installations, our ClearSign Core™ Enclosed Flare has consistently delivered sub 15 ppm NOx and greater than 99.9% destruction efficiency, all without any visible flames. It is available in Forced and Natural Draft configurations and can service the wellhead, pipeline, upstream and midstream industries. ClearSign's offering represents a cost effective, reliable, and complete ...