Refine by
Flare Monitoring Applications Equipment & Supplies
57 equipment items found
Manufactured by:Crist Group, a HARRINGTON Company based inWoodland, CALIFORNIA (USA)
Hot flaring has taken over for most installations these days. We offer hot flaring mandrels & ...
Manufactured by:BMT Co., Ltd. based inYangsan-si, SOUTH KOREA
Application: Flaring, Cutting ring assembly & Ferrule swing. Applicable Fitting Types: Double Ferrule Compression Type Fitting, DIN 2353 Bite Type Fitting. Tube O.D: 1/2 to 42 ...
Manufactured by:Earthcon Energy India Pvt Ltd based inPune, INDIA
Our non-assisted flares and utility flares are used in applications that don’t require smokeless operation, or where smokeless operation can be achieved without the assistance of external steam, air or pressure. When the gas has good composition such as many light hydrocarbon content and high LHV, the application for this flare type will be the main consideration after conducting the ...
Manufactured by:Chicago Tube and Iron Company based inRomeoville, ILLINOIS (USA)
This specification covers cold worked and annealed electric resistance welded low carbon steel pressure tubing with outside diameter 3/8 inch to 2-1/2 inch, inclusive, for use as hydraulic lines for industrial equipment or other applications requiring flaring and ...
Manufactured by:Earthcon Energy India Pvt Ltd based inPune, INDIA
Any type of elevated flare can be applicable for offshore facilities. It considers the material of flare tip from high resistant of sour condition (corrosivity) and weather ...
Manufactured by:Stackmatch Flare Ignition, Inc. based inPlano, TEXAS (USA)
STACKMATCH has an array of High Energy Ignition systems that can be used in your existing or new Flare Pilot application. Insert a STACKMATCH Ignition Probe into your pilot and know that your pilot will ignite and re-ignite whenever it is supposed to. Our Ignition Probes can be designed around any Pilot application. We’ll build to your specification based on the length of Probe and ...
Manufactured by:Hero Flare LLC based inKellyville, OKLAHOMA (USA)
For most flare applications, it is critical that all liquid be removed from the waste gas prior to being sent to the flare. Hero provides complete liquid knockout systems that range from small low flow manual dump systems to a fully automated liquid level control ...
Manufactured by:Parnel Biogas, Inc. based inGlenpool, OKLAHOMA (USA)
The enclosed ground flare is used in applications that required a non-visible flame, where space is limited, populated areas, and increase in destruction efficiency is required. This can be accomplished by utilizing temperature control on the enclosed ground ...
Distributed by:GBA Flare Systems based inBurnham, UNITED KINGDOM
The GBA GCT series flare tip is a robust and flexible design that is routinely used on refinery and chemical plant duty. It's principal means of steam injection is via the upper manifold. This uses a number of injector nozzles located on a manifold positioned around the tip circumference to inject steam at high pressure directly into the flame. This is supplemented by a centre steam nozzle ...
Manufactured by:Arcmed a Halma company based inCambridge, UNITED KINGDOM
Typical thermoforming creates scoring and distortion of tubing that give particulates more surface to cling to, producing sample carryover. Our proprietary thermoforming process creates an inert, smooth surface with a flat-bottom, face ...
Manufactured by:Hero Flare LLC based inKellyville, OKLAHOMA (USA)
Hero Flare offers an excellent alternative to elevated flares for those applications where an exposed flame is not desirable. The Hero Enclosed Combustors are designed to provide a smokeless burn in accordance with the Quad O ...
Manufactured by:Airoil Flaregas Pvt. Ltd. based inDist. Mehsana, INDIA
The Velocity Seal, located integrally at the base of the flare tip, has been designed to prevent air ingress into the flare system and has a number of advantages over gas inversion ...
Manufactured by:Earthcon Energy India Pvt Ltd based inPune, INDIA
Our steam-assisted flares are used in applications where heavier waste gases need to be disposed and high-pressure steam is readily available on site. Our proprietary flare designs offer exceptional smokeless performance, lower radiation levels, and less noise than typical air-assisted ...
Manufactured by:Smitsvonk Holland B.V. - a member of the Durag Group based inZoetermeer, NETHERLANDS
Ignition and control unit for[ pilots burners and lances for ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Model 250 Energex Pilot is a high alloy, stainless steel pilot which combines a high voltage electronic excitor and a high energy spark rod to provide rapid, reliable ignition. More importantly, the Energex pilot provides instantaneous re-ignition if the pilot should ever lose its flame. This pilot system uses a fuel gas line much like other standard pilots, however instead of a flame front ...
Manufactured by:FlareTech Inc. based inStettler, ALBERTA (CANADA)
A utility flare stack is a fundamental type of open pipe flare used primarily for the combustion of waste gases. Its height is engineered to comply with safety regulations, ensuring proper dispersion of combustion products and minimizing ground level radiation, which is generally kept below 1500 BTU/hr/ft². The diameter is determined by the allowable pressure drop specified by clients, following ...
Manufactured by:Hero Flare LLC based inKellyville, OKLAHOMA (USA)
The flare ignition system is one of the most critical components on any flare system to ensure the flare gas is ignited under any conditions. HERO offers the best available flare pilot technologies to meet your specific application. With thousands of pilots in service, our Hotspot Ignition System™ utilizes the most reliable ignition probe technology to ensure reliable performance you can ...
Manufactured by:Prism Integrated Solutions Inc. based inForestburg, ALBERTA (CANADA)
The true fail-safe design of the Prism Premier Pilot is dependable and consistent under the harshest of environments, the Auto Relight is used to relight the pilot in the rare case where flame failure may ...
Manufactured by:Airoil Flaregas Pvt. Ltd. based inDist. Mehsana, INDIA
The Molecular Seal is located just below the flare tip and has been designed to prevent air ingress to the flare riser thus preventing the formation of an explosive mixture in the system. The seal is a gas inversion device causing the gas normally flowing in an upward direction to be turned through 180 degrees in the original direction of the flow. In a static condition, gases lighter then air ...
Manufactured by:Europem N.V based inLier, BELGIUM
Industries will generate Low CV waste gases, which are either difficult to burn or can contain insufficient energy to self-sustain the combustion process. For these applications, Nutara developed the proprietary "ring-of-fire" Flare Tip. This tip has a ring of flame around the central waste gas tip thus ensuring complete oxidation of the low calorific waste gas. Both air assisted and non-assisted ...