Energy industry Software near France

  • ARIA - Wind Tool Software

    ARIA Wind is a tool for planning of wind farms and forecasting production during operation. Based on the evaluation of available energy resources it can be used for assessment of wind power potential, optimization of the design of the farm and determination of the variability of the energy production. By using real time connection of ...

    By ARIA TECHNOLOGIES based in Boulogne-Billancourt, FRANCE.

  • UrbaWind - Software for Wind Modelling in Urban Areas

    The CFD software for wind modelling  in urban areas, or any builtenvironments.The outdoor climatic comfort module is dedicated to local authorities, architects, developers, urban planners, designers, landscapers. Itdetermines the areas of possible wind discomfort to make outdoor spacesmore pleasant and safer for its users.  The Natural ...

    By Meteodyn based in Nantes, FRANCE.

  • Meteodyn WT - CFD Software for Wind Resource Assessment of Wind Farms in Complex Terrain

    The wind flow modelling software for wind resource assessment, Annual. Energy Production evaluation, site suitability and turbine layout analysis, energy production optimization, maintenance costs and turbines lifespan validation. A great number of wind farm developers, consultants, manufacturers, wind farm operators and investors already use ...

    By Meteodyn based in Nantes, FRANCE.

  • OptiPower

    Custom-designed hydropower optimization tool.

    By Power Vision Engineering Sarl based in Ecublens, SWITZERLAND.

  • GridMaestro - Harmonizing Energy Storage Software

    The GridMaestro suite of products was developed by Alevo Analytics for the purpose of optimizing Alevo GridBanks on the grid. This collection of hardware/software and software only products offers valuable data analytics and actionable intelligence while managing the integration and real time operation and monitoring of GridBanks. GridMaestro ...

    By Alevo Group S.A based in Martigny, SWITZERLAND.

  • DIgSILENT GridCode - Version 2.0 - Verification Tool

    New rules and grid codes to connect generators to the grid are emerging worldwide. In every country or region, the operators responsible for the safety and reliability of the power system have established different requirements to connect renewable generation systems to transmission and distribution networks. Such requirements are highly dependent ...

    By DIgSilent GmbH based in Gomaringen, GERMANY.

  • Version GeoDTS - Enhanced Geothermal Response Tests Software (EGRT)

    To meet the needs of EGRT (Enhanced Geothermal Response Tests), leakage detection and seepage monitoring, AP Sensing developed a specific GeoDTS solution. A hybrid sensor cable containing copper wires for heat dissipation is installed together with the borehole heat exchanger, to determine temperatures along the entire length. Our specialized ...

    By AP Sensing GmbH based in Böblingen, GERMANY.

  • Version IDSpecto - Metering Information System

    Our systems work when the wind blows and wind turbines turn. And even if not. Because regulating and controlling wind turbine generator systems is one of the numerous application cases for our metering information system IDSpecto.

    By GÖRLITZ AG based in Koblenz (Gewerbepark Nord), GERMANY.

  • Smart Energy Apps and Online Dashboards

    Our smart energy Apps and online Dashboards let Smart Battery owners manage their energy production, storage, use and grid-sharing, online or in App, as well monitor savings and historical data. Community owners of Smart Batteries for local authorities and housing groups can also see their overall group energy use as well as savings and trading ...

    By Moixa Energy Holdings Ltd. based in London, UNITED KINGDOM.

  • proWAVE Software

    proWAVE software is an Oceanlinx tool which allows one to model a wave energy converter (WEC) as a fully integrated system including oscillating water column (OWC), turbine, generator, flywheel, and all manner of controls features.

    By Oceanlinx Limited Office in London, UNITED KINGDOM.

  • GeoLogik - Version SF - Geothermal Modeling Software

    GeoLogik SF is a program for calculating heat flow in the underground. The software is designed for shallow (means few 100 m) geothermal arrays of borehole heat exchangers (BHE). A finite element (FE) method is used for the underground model.

    By GeoLogik Software GmbH based in Braunfels, GERMANY.

  • 2D Dynamics Module

    The 2D Dynamics module is an extension to PLAXIS 2D. Geotechnical applications require advanced constitutive models for the simulation of the non linear, time dependent and anisotropic behaviour of soils and/or rock. Although the modelling of the soil itself is an important issue, many projects involve the modelling of structures and the ...

    By Plaxis B.V. based in Delft, NETHERLANDS. from PLAXIS 2D Software line

  • Premium

    Version CADET Edge - Dynamometer and Engine Controller Software

    The CADET Edge is part of the CADET range of control systems, designed specifically for dynamometer control and engine throttle actuation. The CADET system can actuate eddy current, hydraulic, AC or DC dynamometers and will be supplied with the appropriate power modules.

    By Sierra Instruments, Inc. Distributor in NETHERLANDS.

  • PVscout - Version 2.0 Basic - PV-Sizing Software

    PVscout is a PV-sizing software for the planning and calculation of grid-connected photovoltaic systems irrespective of manufacturer. Quickly and reliably planning of PV-Plants with the version PVscout 2.0 Basic .

    By Solarschmiede GmbH based in München, GERMANY.

  • Romax WIND - Wind Turbine Gearbox and Drivetrain Design Software

    Our unique software, RomaxWIND, enables you to create and analyse drivetrain systems and gearboxes, and then accurately simulate their behaviour and performance to ensure you get the optimum final design.

    By Romax Technology Limited based in Nottingham, UNITED KINGDOM.

  • Romax InSight - Fleet Monitor Software for Wind Turbine Health Monitoring

    InSight Fleet Monitor is Romax’s web-based hardware independent software for wind turbine health monitoring. It enables an entire global fleet of turbines - whatever the turbine type or condition monitoring system (CMS) - to be monitored using a single software platform, and eliminates any problems created by moving between disparate ...

    By Romax Technology Limited based in Nottingham, UNITED KINGDOM.

  • MaxHydro - Hydropower Optimization Software

    Optimization in general, is the search for a feasible operational policy that maximizes or minimizes the value of the objective function. Hydropower is non-linear function though the operation problems in hydropower are non-linear problems. The best solution to non-linear problems can be obtained by application of non-linear optimization ...

    By Allocate based in Albany, NEW ZEALAND.

  • zenon for Smart Cities

    COPA-DATA is an official and worldwide member of Microsoft’s CityNext initiative and profoundly contributes to establishing Smart Cities. Smart City solutions with zenon can considerably support governments and its citizens to face the challenges of tomorrow, especially in the areas of energy, water/waste water, public transportation and ...

    By COPA-DATA based in Salzburg, AUSTRIA.

  • Contract Management

    The large number of changes to the regulatory framework both now and in the future mean that the energy market is in a great state of flux. New, more complex and short-term legal transactions involve major challenges for all market participants. MTS SSO Contract and Capacity supports you in all tasks relating to the conclusion and management of ...

    By ECG Erdgas-Consult GmbH based in Leipzig, GERMANY. from Storage Software line

  • Nomination Management

    The increasing process speed in contract handling, the large number of products and contracts as well as the extensive communication required with every business partner are special features of the European energy market. To operate efficiently and therefore remain competitive is both a challenge and an essential requirement for all market ...

    By ECG Erdgas-Consult GmbH based in Leipzig, GERMANY. from Storage Software line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you