- Home
- Articles
Refine by
Energy Industry Articles & Analysis
10,408 articles found
Methane leakage poses a significant safety risk in the operation of natural gas transmission and distribution systems, especially at critical points including pressure regulating stations, valve chambers, and metering stations. In the event of methane leak, there is a high potential risk of explosion, threatening personnel safety, equipment integrity, and the surrounding environment. In order to ...
The global electric vehicle fleet reached 40 million units in 2024. Each vehicle carries a battery pack weighing 400-900 pounds, containing lithium, cobalt, nickel, and manganese. Most packs were manufactured between 2018 and 2024 and have an expected lifespan of 8-15 years. Projections indicate a wave of end-of-life EV batteries entering recycling facilities starting in 2026, peaking around ...
PV module IV curve is a powerful diagnostic tool for understanding how a photovoltaic module actually performs under real-world conditions. It shows how current and voltage interact and helps verify system health, detect performance losses, and support reliability assessments for engineers, O&M teams, EPCs, and asset owners.This guide explains what a PV module IV curve is, how to interpret it, ...
The European Union’s Plastic Packaging and Packaging Waste Regulation (PPWR), coming into effect in 2026, sets stricter requirements on recycled content, recyclability, and environmental impact of plastic packaging. Meeting these targets is challenging, especially for complex or multi-layer plastics. Pyrolysis oil, a liquid product derived from waste plastic pyrolysis, is emerging as a valuable ...
The pyrolysis process, often associated with waste-to-energy conversion, involves the thermal decomposition of organic materials in an oxygen-limited environment. While much attention has been given to the production of biofuels and solid char, the combustible gas generated during pyrolysis holds significant untapped potential. These gases, primarily composed of hydrogen, methane, carbon ...
Charcoal, a traditional fuel, has seen its production methods gradually improve thanks to modern production technology. Currently, many producers are abandoning traditional, unsafe, and inefficient charcoal making methods using earthen or brick kilns, and instead adopting environmentally friendly and efficient methods to produce charcoal, thus meeting market demand while also balancing ...
The genuine feedback from a Guyana client that purchased a complete sawdust charcoal briquettes plant from Shuliy, including a rotary dryer, briquette machine and vertical carbonization furnace. The client processes hexagonal briquettes via a set workflow: drying sawdust to 10% moisture, forming briquettes at 300°C, and carbonizing for 6-8 hours. Highly satisfied with the equipment’s ...
In the offshore and petrochemical industries, a single component failure doesn’t just cause a leak—it triggers million-dollar shutdowns, environmental liabilities, and safety hazards. For stockists and procurement managers, sourcing flanges is not a commodity purchase; it is a risk management decision. As a forged steel flange manufacturer with over 40 years of experience serving the ...
In the world of industrial piping, the term “Seamless” is synonymous with operational integrity. While welded pipes have made technological leaps, the absence of seamless steel pipe remains the critical requirement for high-pressure, high-temperature, and corrosive environments found in offshore drilling and petrochemical refineries. For stockists and project engineers, the challenge ...
Soiling—accumulation of dust, dirt, pollen, agricultural residue, and other airborne particulates on PV module surfaces—causes light transmission losses and measurable power reductions. While its impact on ongoing operation is well established, soiling also affects capacity and performance testing, where even small losses can carry contractual and financial implications. Field studies indicate ...
The construction industry stands at a precipice of profound transformation, driven by an urgent mandate to decarbonize. Central to this evolution is the ready mix concrete plant, traditionally a significant source of embodied carbon due to its reliance on Ordinary Portland Cement. However, a new generation of low-carbon batching technologies is fundamentally re-engineering how concrete is ...
ACUAES manages different installations located in remote areas of Segovia to control the supply of several municipalities to provide energy to the Communities of Villa and Tierra de Pedraza. The company needs a solution that allows them to monitorize the supply of several ...
Vilaller has a water tank that supplies the local area. In order to check the important parameters in the facilities (water level, flow rate, etc.), there is a system that collects data and communicates with the central office, managing and storing the ...
The owners of a private estate in the Catalan Pyrenees wanted to take advantage of the existing potential for hydropower, which had previously gone unused. The Catalan Pyrenees region has a high potential for making use of natural resources for ...
Canal de la Huerta is a water management company based in Novelda. The facilities have a turbine that is over 30 years old, and that has become obsolete. Its efficiency has been considerably reduced over time, and can only run for a few hours. This reduces Co2 emissions to: 163 ton ...
Gas cooler designs for exhaust-gas heat recovery and biogas dehumidification vary, but many service highly corrosive gas mixtures. Material selection and system design determine whether equipment will meet expected longevity and performance in these conditions.Exhaust gas heat recovery is now common across industries, delivering cost savings and environmental benefits. With as much as 35% of an ...
The micro hydro plant located in Hiekawa (Japan) channels water from the river through a pipeline, and needs a turbine to generate ...
The Aguas de Valencia Group manages the facilities in La Coma (Paterna) that provide water to the region. A pipe connects two reservoirs on different levels, so that the reservoir located at the upper level lets part of the water run into the lower reservoir. In the same facilities, there is a pumping system used to distribute water resources to different locations in the surrounding ...
The municipality of Cártama (Málaga) has a deposit located at an elevated level from which drinking water is distributed by gravity. In one of the sectors of the network there is a reducing valve that reduces the pressure downstream by 20 ...
Water facilities in Manizales with a surplus of pressure. This means the water arrives in the reservoir with great force, but this energy is not being ...