Refine by
Applications
- Renewable Energy Solutions for Agriculture
- Hydrogen Fuel Cell System for Cars
- Fuel Cell System for Aviation Industry
- ORC System for Use of waste heat in the industry
- Microsteam - Turbine Power System for Commercial Applications
- Variable Phase Turbine for Industrial Applications
- Microsteam - Turbine Power System for Institutional Applications
- Thermal energy storage systems for data centers & telecommunication sector
- Thermal energy storage systems for gas engines
- Thermal energy storage systems for district heating & cooling
- Thermal energy storage systems for commercial buildings sector
- PVT Solar Panel for Renovations
- PVT heat pump panels for Non-residential building
- PVT Solar Panel for Local Heating network
- Gasification Unlocks the Value of Biomass and Waste
- Autonomous Flying Machines for Maritime World
- 1mw Compact Generator for Critical Infrastructure Support Power Systems
- CHP Unit for Natural Gas
- CHP Unit for Biogas
- CHP Unit for Industrial Facilities
- CHP Unit for Schools and Universities
- Energy Solution for Power Resilience
- Energy Solution for Reducing Energy Bills
- Energy Solution for Battery Buffered EV Charging
- Solar Solutions for Residential Scale
- Solar Solutions for Commercial Scale
- Solar Solutions for Utility Scale
- Solar Solutions for BIPV Solution
- Solar Power for Single-Family Home Builders
- Solar Power for Multifamily Builders
- Process heating for commercial and industrial functions
Electric Launch And Recovery Systems Equipment & Supplies
1,261 equipment items found
Manufactured by:MacArtney A/S based inEsbjerg V, DENMARK
The all-electric eLARS incorporates MacArtney’s tried and tested technology and answers a market need for more eco-friendly products. Featuring zero pressurised oil over water, significantly reducing the risk of oil spillage and providing energy efficiency improved by more than 30%, the eLARS provides a technology solution for tomorrow. The all-electric eLARS supports a wide range of ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard Electric Brakes provide positive stopping and reliable holding of rotating devices on demand-every time. Spring engaged when current is interrupted and electromagnetically relased when voltage is applied, these brakes are designed for maximum flexibility and long, dependable service. Each brake has an easy-to-adjust wear bolt to compensate for friction service wear and extend the life of ...
Showcase
Manufactured by:Bosch Industriekessel GmbH - Industrial Boilers based inGunzenhausen, GERMANY
The ELSB (Electric Steam Boiler) is a highly efficient, electrically heated steam generator for 350 to 7,500 kg/h steam at up to 24 bar. When operating with green energy, the boiler allows your company to achieve a CO2-neutral steam supply. Generate up to 7.5 t/h steam in a highly efficient way using just electricity – no combustion, no emissions. High steam quality, excellent dynamics, ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMont-Royal, QUEBEC (CANADA)
For the past 45 years, ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels, and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, steam turbine gland systems, ...
Premium
Manufactured by:F.A.S.T. GmbH - Groupe Claire based inLangenbrettach, GERMANY
Electrical resistance data logger for brandes. District heating pipelines or similar systems. Battery operated, lasts for up to 5 years. Software hs log free and easy to use. Ip66 housing with grommet for the wires. Connecting to brandes system ...
Manufactured by:Stäubli Electrical Connectors AG based inAllschwil, SWITZERLAND
This system has been designed to create a pull-out electrical connection between two systems of double-pole insulated busbars. It is made up of MC Multilam contact element strips, mounted in a plastic frame of variable sizes. The CLIPLAM can easily be attached to silver-plated busbars of varying thicknesses between 2 and 5mm by means of two clips. The electrical contact is established by the MC ...
Manufactured by:AEG Identifikationssysteme GmbH based inUlm, GERMANY
The antenna ANN X2L is a passive unit designed for the ARE i2 reader. It is well suited for both, static as well as dynamic ...
by:ABL based inPegnitz, GERMANY
With the invention of the SCHUKO plug, our company founder Albert Büttner set a new standard for electrical connecting devices in 1925. SCHUKO is short for the German 'Schutzkontakt' (protected contact). Because of its circular geometry and two protected contacts, SCHUKO is regarded as especially safe to use in comparison with other electrical connecting device systems. The success ...
Manufactured by:VadaTech Inc. based inHenderson, NEVADA (USA)
The AMC754 is a Processor AMC in a single module, mid-size, based on the Intel® 5th generation Xeon 4-core, 8-core or 16-core Processors (Broadwell). The efficient SoC design has low power consumption and integrated PCH technology. The module follows the AMC.1, AMC.2 and the AMC.3 ...
Manufactured by:Urban Disposal Solutions based inYunusemre, TURKEY
Our Electric laundry chute system doors are equipped with a 24V electric strike and a microswitch to indicate door status changes (open or closed), allowing monitoring across different floors. This feature enables electric locking of the hopper doors for laundry chute maintenance or interlocking when any door is ...
Manufactured by:Reivax North America, Inc. based inMontréal, CANADA
The SNX is a robust and efficient system for adjusting and controlling the timing of a generating unit to the electrical system, quickly and accurately adjusting the frequency and voltage of that machine. The SNX lets you choose between two bars, electrically separated and with different measurement instruments for timing the machine. By sending pulses to the speed governors and voltage occurs ...
by:ReadyFlo Systems LLC based inCorpus Christi, TEXAS (USA)
PLC panels built to your specification with the highest level of quality. From Allen Bradley to Schneider Modicon, our large climate controlled panel shop can build your PLC panels, small and large, with unmatched attention to detail. ...
Manufactured by:AEG Identifikationssysteme GmbH based inUlm, GERMANY
The ACM 9 communication module connects the ARE i9 readers with the latest interfaces. At the same time, it can be used as a multiplexer, as up to 4 readers can be connected. This can be done in a mix, so LF and HF components can be ...
Manufactured by:AEG Identifikationssysteme GmbH based inUlm, GERMANY
The pigeon ring is mainly used to identify race pigeons. The chip in this ring contains an internal random generator for the alterable part of the ring number. This feature is unique and the security is much higher than on any other pigeon ring on the ...
Manufactured by:Michaud Group based inViriat Cedex, FRANCE
The Fuse Cutout Sleeve 100A is engineered to accommodate a 22x58 fuse cartridge, a neutral tube, or a mini-switch, and is specifically designed for environments devoid of mechanical loads. It features mechanical tightening terminals, allowing for easy installation with a basic spanner. The cutout sleeve facilitates the opening and closing operations under a load of up to 63A, ensuring reliable ...
Manufactured by:Welders Filtration Technology (WFT) based inAalst, BELGIUM
WFT can modify your existing filters (also not WFT products) to the current way of working and therefore do following actions on site in your facilities: Repainting of the press frame. Supply and installation of new plates and cloths. Customize your installation to the European machine Directive. Refresh or adjust plate shifting system. Adjusting the control box. Study the flow chart and make ...
Manufactured by:Cranston Machinery Co., Inc. based inOak Grove, OREGON (USA)
The RapPress is Cranston’s glue system for dry sheeted pulp bales. It is a portable machine, powered by pneumatic and electric systems. The adhesive applicators are mounted into the adjacent wrapper dispenser or folder and the presses are positioned in the strapping station’s conveyor where the wrapper is pressed. Production varies depending on environmental and material conditions. A ...
Manufactured by:SINOHERS based inBeijing, CHINA
Fuel : Methanol. Electricity output : 220V AC. Operating modes : Off-grid Grid-Connected. Heat output : 50-85°C Hot ...
Manufactured by:Arrow Speed Controls Limited based inRichmond, BRITISH COLUMBIA (CANADA)
The GOT Simple Series provides an operator interface for systems that require cost-effective performance. The GS Series’ built-in functionality provides a platform that enhances other Mitsubishi Electric components in the system with monitor tools, backup/restore of programs, and data transfer ...
Manufactured by:Henan Demeter Machinery Co., Ltd based inZhumadian City, CHINA
Gantry feeding system can be used for a type equipment and h type equipment. it is fully automatic feeding ...