Energy Management Applications in USA
-
Premium
FlareSpection
Infrared Camera System for Continuous Pilot Flame and Flare Stack Monitoring The FlareSpection™ system provides extremely clear and reliable flare image and pilot flame monitoring of multiple flare tips. FlareSpection optimizes plant operations, ...
By Advanced Energy Industries, Inc. Office in Calabasas, CALIFORNIA (USA).
-
Premium
Power Generation Solutions for Refinery Gases Sector
Solar Turbines’ modular, industrial gas turbines can integrate combined heat and power (CHP) allowing significant energy efficiency improvement. Refineries and petrochemical plants have the need to become integrated, energy efficient and sustainable. One benefit of the gas turbine solution is that streams can be used independently or blended together when the refinery production varies, and various gas producers/consumers come online or offline. This capability enables customers to reduce flaring and improve ...
By Solar Turbines Incorporated Distributor in Anchorage, ARKANSAS (USA).
-
Premium
Electronic fuel control valves solutions for oil and gas industry
Continental Controls provides services and products for the midstream and upstream oil and gas markets. CCC products can be on anything from a small GM engine burning field gas at a wellhead in New Mexico, to a GE LM-2500 gas turbine, pumping gas from offshore platforms to Pemex gas pipelines in southern ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Intelligent compliance solutions for oil, gas and petrochemical
Oil, gas and petrochemical companies are focused on striking a balance between improving the compatibility of their operations with the environment, while economically developing energy resources and supplying high quality products. The pressure to work with the public, government and various other stakeholders in their supply chain to use natural resources in an environmentally responsible manner while protecting the health and safety of employees and the public can be overwhelming. 3E provides a comprehensive ...
By 3E - SDS and EHS Compliance Data Management Solutions based in Carlsbad, CALIFORNIA (USA).
-
Oil & gas solutions for the gas pipeline transportation areas
Compressor stations are located at intervals of every 40-70 miles along a gas pipeline to compress the gas to a specified pressure, thereby allowing it to continue traveling along the pipeline to its destination. Compressor stations require filter separators that remove liquids, dirt, particles, and other impurities from the natural gas, and CECO offers considerable expertise at separation for gas pipeline compressor ...
By CECO Environmental Distributor in Frederick, COLORADO (USA).
-
Stainless Steel and Specialty Alloys Equipment for Oil and Alternative Energy Industry
API 620, API 650 and ASME certified. Groupe Berlie-Falco has over 30 years of experience designing process solutions and manufacturing stainless steel and superior alloys equipment. It is able to provide its clientele with turnkey solutions thanks to its experienced team of engineers and technicians, its specialized equipment and its unique system of fabrication bays with overhead clearance ranging from 30 to 70' and lifting capacity of 90,000 ...
By Groupe Berlie-Falco Inc. Office in Chicago, ILLINOIS (USA).
-
Gas Turbine Generator for Oil & Gas Solution
To ease the process of integrating the OP16 Gas Turbine into your current or new application, OPRA Turbines can assist by providing process know-how and knowledge of best practice. Are you looking for a turnkey solution? OPRA works with an international network of Oil & Gas partners who are experts in integrating our equipment into existing or new ...
By OPRA Turbines Office in Austin, TEXAS (USA).
-
Oilfield Power Systems for Oil & Gas Industry
Flared gases and NGLs can be re-purposed as fuel for flex-fuel, low-emissions LPP Combustion Power Systems, lowering production costs, reducing logistical burdens, and addressing Gas Capture Plan and other compliance issues with flaring and emissions. The Lean, Pre-mixed, Pre-vaporized (LPP) equipment enables clean combustion of liquid fuels in gas turbines and industrial boilers and burners. In addition to flare-gas NGLs, the LPP Combustion Oilfield Power System also operates on a variety of traditional liquid ...
By LPP Combustion, LLC based in Columbia, MARYLAND (USA).
-
Industrial process solutions for oil, gas & energy industry
Oil and gas extraction and processing has some extremely demanding industrial applications. There are various operations within this energy sector which utilize JWC’s Monster Industrial grinders for drilling mud solids control and to shred down tough debris which can disrupt operations and cause expensive repairs. Our grinders are also used to protect pumps in tank cleaning equipment minimizing ...
By JWC Environmental Office in Santa Ana, CALIFORNIA (USA).
-
Gas safety and process control for gas/oil/coal-fired power generation and refineries
By AMETEK Process Instruments Distributor in , CALIFORNIA (USA).
-
Flow & energy management solutions for oil and petrochemical industry
Crude oil (after first stage separator), offloading of crude oil, water injection or refined petroleum. EF10-C clamp-on,non-intrusive ultrasonic flowmeter for easy installation. The enclosure is IP65 (NEMA 4X) wall-mount type. Class 1 Div 2 version can be offerred upon ...
By Spire Metering Technology, LLC. Distributor in Santa Ana, CALIFORNIA (USA).
-
Bio solutions for the offshore oil & gas industry
With new, tougher environmental regulations going into effect, the risk of dealing with lubricant discharges has never been greater, but that risk can be minimized by using RSC Bio Solutions’ line of readily biodegradable lubricants, cleaners and solvents. Our RSC EnviroLogic and RSC SAFECARE series meet a wide variety of environmental regulations, such as the 2013 EPA Vessel General Permit (VGP), SARA, SNAP, and US ...
By RSC Bio Solutions based in Indian Trail, NORTH CAROLINA (USA).
-
Keenan Filters Technology for PowerGen Fuel Filtration & Polishing
Dirty Fuel is the number one reason for diesel engine failure. No matter if your backup power generator is used for industrial, commercial or residential protection, a comprehensive Keenan fuel management system will ensure clean fuel delivery for enhanced engine reliability. Much more than a common fuel filter, Keenan offers the only completely integrated, full-feature fuel management systems available to ensure clean, dry, fuel delivery. From 30 to 3000 hp, if your generator uses diesel fuel, Keenan offers a ...
By KTI Systems Inc based in Southwick, MASSACHUSETTS (USA).
-
Electrical Thermal Monitoring Technology for Oil and Gas Industry
Reduce downtime and increase personnel safety with continuous monitoring for electrical assets. Hitting productivity goals and ensuring workforce safety are two key objectives for oil and gas managers. Whether operations are up-, mid-, or downstream, or marine (LNG, FPSO), these challenges are shared across the energy sector. To eliminate the risk of unexpected electrical equipment failures that would otherwise compromise personnel safety and interrupt production, oil and gas companies must utilize new and more ...
By Exertherm Inc. based in New York,, NEW YORK (USA).
-
Electric Power Generation Technology for Oil and Gas Industry
Offshore oil and gas exploration has seen a tremendous growth in the recent years. Maritime energy exploration activities have seen a considerable growth in the last two decades with offshore operations migrating farther away from the shorelines into deeper waters. While offshore oil and gas wells have shown to offer abundant energy supply, severe challenges have risen associated with the remote and isolated nature of the exploration locations. One such challenge is the supply of electrical power to support ...
By Ocean Power Technologies, Inc based in Monroe Township, NEW JERSEY (USA).
-
Variable Phase Turbine for Oil and Gas
In the oil and gas field there is a significant opportunity to recover a substantial amount of energy and increase plant production by utilizing Energent's two-phase turbine technology. A highlight of these opportunities lies within the liquid natural gas (LNG) extraction process. By replacing liquid J-T valves with the Variable Phase Turbine, power can be recovered, and more importantly, the liquid fraction can be increased improving the plant output by up to ...
By Energent Corporation based in Santa Ana, CALIFORNIA (USA).
-
Heat Recovery System for OIL & GAS Industry
Oil & Gas is a multi-trillion dollar industry that continues to fuel our world’s economic engine. Getting this resource from the ground to its final destination is a complex process with many steps along the way. Heat recovery can improve process efficiencies and get more product to ...
By Echogen Power Systems based in Akron, OHIO (USA).
-
Petroleum & Gas Purification
Activated Carbon is used for the recovery of economically valuable products like gasoline vapors, benzene and solvents at petroleum refineries. MFAR manufactures Activated Carbon with high working capacities for these special applications. Activated Carbon is the best adsorbent for removal of hydrogen sulphide gas (H2S) during the process of sour crude oil in refineries. ...
By IndoCarb Corporation Inc based in Pittsburgh, PENNSYLVANIA (USA).
-
Heat Recovery and Waste to Energy Solutions for Oil and Gas
Within the intricate network of oil and gas collection and distribution processes, waste heat is an inherent byproduct from compression/pumping stations to flares. Rather than letting this valuable energy escape into the environment, we specialize in identifying strategic points in your operations where we can turn this waste heat into a productive ...
By Clean Energy Technologies, Inc. based in Irvine, CALIFORNIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you