Geothermal Heat Equipment For Geothermal
-
Manufactured by Geo-Flo Corporationbased in USA
Flo-Link variable speed panel mount flow centers includes all of the controls, sensors, and fittings necessary for connecting to the ground loop (1-1/4” PE fusion) and the heat pump (1″ FPT, 1″ swivel union, or double O-ring female union). Flo-Link variable speed flow center kits are required when you wish to have a pressurized variable speed pumping solution with a geothermal ...
-
Manufactured by Thermotec GmbHbased in GERMANY
It's possible to create a design using a little construction space using the customer's data. The Thermo-Fluid S is connected directly between the oven pipe (or the heating system) and the chimney. The operating temperatures are up to 300°C (standard). The Thermo-Fluid S is low maintance with low pressure drop in the flue gas. Depending on the application you can have energy savings up to 15 ...
-
Manufactured by ClimateMaster, Incbased in USA
Part-load values up to 29.5 EER/ 6.1 COP, 1-Stage Compressor, External Fixed Speed Water Flow Control, Non-Communicating Controls, Single Speed Indoor Fan (Standard), Variable Speed Indoor Fan (Optional), Vertical, Horizontal, and Downflow ...
-
Manufactured by Geomachine Oybased in FINLAND
GM2000 is a geothermal well-drilling rig that enables the efficient utilisation of geothermal heat in larger sites and district heating networks. It is the first rig in the world specially designed for drilling 2,000-metre-deep wells. ...
-
Manufactured by Total Green Manufacturing (Mfg.)based in USA
Standard Features: Refrigerant Based (Water-Free) Geothermal Heat Pump System, Single Stage Forced Air DX Heating and Cooling, Analog Electrical Controls, Commercial Off-The-Shelf Parts, Standardized Mechanical Refrigerant Controls, High-Efficiency Copeland Scroll Compressor, Compressor Protection Sensor, Closed Loop Geothermal Heat Pump, Water-Free Copper Ground Loop, Line Set Lengths (Up to 100 ...
-
Manufactured by Fitzer Incorporationbased in INDIA
Shell and Tube Heat Exchanger is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. Shell Tubes Heat Exchanger are classified into fixed and Floating type Heat Exchangers . Fixed type Heat Exchangers are used where there are absolutely no chances for inter mixing of two ...
-
Manufactured by Miami Heat Pumpbased in USA
These High Efficiency Roof Top Units are an all-in-one package systems. Completely pre-charged with R410A. The units are built and designed to your specifications. Our standard units offer comfort cooling and 100% outside air applications. You can choose for a down or horizontal discharge. Geothermal WSHP models are also ...
-
Manufactured by Alaquabased in USA
A heat exchanger is a device built for efficient heat transfer from one medium to another, whether the media are separated by a solid wall so that they never mix, or the media are in direct contact. They are widely used in space heating, refrigeration, air conditioning, power plants, chemical plants, petrochemical plants, petroleum refineries, and natural gas processing. One common example of a ...
-
based in USA
BTES is an improvement on conventional closed-loop ground source heat pump (GSHP) geothermal systems. The ground heat exchanger (GHX) array for a BTES system is designed and operated in a manner such heat is stored or abstracted seasonally, whereas conventional GSHP systems are designed to simply dissipate heat or cold into the subsurface. BTES essentially uses the Earth as a thermal battery, as ...
-
Manufactured by Gastreatment Services (GTS)based in NETHERLANDS
The secondary network is heated from the geothermal installation. With this warm water, the heat is supplied to the grower in the collection ...
-
Manufactured by Dizayn Groupbased in TURKEY
These are pipes produced in order to prevent the heat transfer of the hot and cold fluid. As the pipe composes of different material layers it is in the composite filling class. Geothermal pipes are three layered. It is composed of carrier pipe inside, polyurethane layer(PUR) in the middle as isolation material and Polyethylene (PE) pipe on he external as preventive casing. The carrier pipe ...
-
Manufactured by Suomen Lämpöpumpputekniikka Oybased in FINLAND
The full power Lämpöässä Vmi is especially suitable for use as the primary heating system of new and renovated residential buildings and secondary residences, as well as for condominium-specific heating in terraced houses and detached houses. Lämpöässä Vmi is a right choice when heatable area is larger and demand for domestic hot water is high. ...
-
Manufactured by G Stow PLCbased in UNITED KINGDOM
A geothermal ground source system is shown to be six times more efficient than conventional fossil fuel heating and cooling methods, with huge environmental advantages – by drilling a borehole into the ground and using geothermal energy, which is available everywhere, no fossil fuels are ...
-
Manufactured by Eckert Engine Company Inc.based in USA
Projected: 2M to 3K the fuel economy of conuentional engines (Diesel 8 Otto Cycles). Uirtual elimination of harmful emissions (CO. flOn and Unburned Hydrocarbons). Significant reduction of C02 emissions. Higher torgue with no sacrifice of ...
-
Manufactured by Enertech Global, LLCbased in USA
Our new Hydron Module variable-speed, variable-capacity heating and cooling system adjusts the BTUH output to match the load profile for desired comfort settings. With the help of an outdoor temperature sensor, the modulating compressor adjusts to deliver the perfect water temperatures for a radiant or hydronic system application. This is vital because the efficiency of a water-to-water ...
-
Manufactured by Canariis Corporationbased in USA
Canariis Corporation offers a wide variety of packaged Air-Cooled Chiller Systems. Our designers have years of experience and are ready to assist in designing a system to meet your requirements. The benefits of a package over a field assembled system include: increased system efficiency, single source responsibility, third party certification, factory testing and lower installed ...
-
Manufactured by Zuccato Energia Srlbased in ITALY
The structure of the proposed plant is based on the so-called low-temperature organic Rankine cycle (LT-ORC), and may be summed up by the diagram in Figure 1. A heat source [1] generates heat, which is conveyed through a vector fluid circulating into a closed loop to one or more primary heat exchangers, usually a preheater and an evaporator [2], where said heat is transferred from the vector ...
-
Manufactured by Zuccato Energia Srlbased in ITALY
We transform energy. From heat to clean electricity. Zuccato Energia produces electricity from your waste heat. The ORC Systems recover the flue gases of your process and transform it into zero emissions energy. With ORC you can reduce costs and increase your competitiveness finding application in industries (such as glass, steel, ceramics and cement) waste and biomass disposal, engine exhausts ...
-
Manufactured by Suomen Lämpöpumpputekniikka Oybased in FINLAND
The Lämpöässä geothermal energy system is an entity which can heat and cool properties and also produce domestic hot water. The system is especially suitable for detached houses, terraced houses and blocks of flats. The geothermal energy system consists of heat collection circuit, ground source heat pump unit, heat distribution circuits, producing of domestic hot water. ...
-
Manufactured by GeoComfort - a brand by Enertech Global, LLCbased in USA
GeoComfort Residential Series Two-Stage, Multi-Position, Vertical Packaged (YT) geothermal heat pumps are a fit for applications that require ducted, forced air heating and cooling. These flexible heating and cooling systems come standard with domestic hot water assist to help cut hot water costs 25% - 40% annually. With our highest efficiencies, these systems are ideal for small to large homes, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you