Model BPC-612 - Cylinder Driven Lift
Meets ANSI Z245 Type B Specifications, Powered By a 3” Bore Hydraulic CylinderWith Cushions On, Both Ends, EZ Bolt On Kit Standard, Heavy Duty Cast Iron Bushings For Long Life Cycle, Kick out Feature Protects Lifter From Ground Damage, Modular Bolted Construction For Ease Of Part Replacement, Non Adjustable Lower Hook Linkage.
-
Most popular related searches
Lift Unit Specifications
1 MOUNTING BRACKET:
Unit wil l be bolted to mounting bracket for ease of repair or replacement. In the event of truck settling, unit height must be adjustable in 1” increments to 2” total .
2 HYDRAULIC CYLINDER:
Non adjustable cushions on both ends.
3 CART LIFTING CAPABILITY:
ANSI Type B (American 2 bar cart)
4 Major Pivot Points:
All major pivot points are 1 ¼” diamet er and equipped with heavy duty cast iron bushings and 'Ze rk' type grease f ittings.
5 IMPACT RELEASE DEVICE:
The unit has a mechanical ki ckout f eature that al lows the uni t to rel ease f rom the vertical (down) position when struck by the st reet surface while the t ruck is in forward motion. When fully activated the vert ical ground clearance i s improved by f ive (5) inches. Unit must reset automati cal ly to lif t position.
6 LIFT BAR POCKET:
The lif t bar pocket (saddle) is designed to minimi ze car t f ree movement when unit is in the up position. Bolted on for ease of replacement if damaged.
7 MOUNTING HEIGHT:
With the t ruck in 'Level' position, the measurement f rom the top of the mounting plate to ground level will be 40 to 42 inches. Note: User pr ef erences vary, so mounting height should be approved by the end user.
8 DUMP ANGLE:
The lif t plate when fully rai sed, wi ll be at no less than 140 degre es inclusive .
9 LIFT PLATE (SHELL):
Construct ed of 1/4' thick st eel plate. Bolted on for ease of replacement i f damaged. The l if t plate will be paint ed saf ety yellow.
10 HOOK (LOWER BAR LATCH):
Mechanically operated by double non-adjustabl e steel l inkage to securely hold the cart in place even if it is shaken at the top. Rotating styl e with replaceable bushings mount ed on 3/4' diamete r steel shaf t. No sliding surfaces to wear out. Pivot points ar e bolted to the li f t plate for ease of replacement i f damaged.
11 CART LIFTING CAPACITY:
The unit will lif t a minimum of 350 pounds at 1200 PSI hydraulic pressure.
Customer reviews
No reviews were found for Model BPC-612 - Cylinder Driven Lift. Be the first to review!