Waste-To-Energy Services
-
Manufactured by Detega SAbased in SPAIN
The main purpose of incineration is reducing the waste volume and destruction of potentially dangerous substances. Reuse by means of recycling waste is the best options but this is usually possible only if economical feasibility and environmental acceptable methods are available. Incineration of waste materials converts the waste into ash, flue gas, and heat. The ash is mostly formed by ...
-
based in USA
ARC Southern Energy LLC has capabilities to work with renewable energy project developers to help them monetize their carbon credits and RECs. ARC SE is capable of originating, evaluating and documenting carbon credit projects, securing verifiers to the project site and then registering it with CCAR and CCX. We will prepare all the documentation required for carbon credits, guide you through the ...
-
Manufactured by NRGgroup GmbHbased in GERMANY
In addition to the energy production and transmission from fossil and renewable energy sources, we also work with the generation of energy from industrial residues and wastes, both in liquid, as well as in a gaseous state. Another important building block of our product portfolio is the use of high-temperature flue gases for energy recovery, e.g. from industrial production processes like glass, ...
-
Manufactured by Ener-Core, Inc.based in USA
The MFTF is a critical tool as Ener-Core moves beyond its initial sales and begins to deploy its broad based commercial sales and marketing expansion phase. The facility provides a rapid analysis tool both for the testing of new larger-scale Power Oxidizers for potential strategic relationships, as well as a mechanism to rapidly evaluate waste gases provided by prospective customers seeking to ...
-
Manufactured by Bioenergy and Sustainable Technologies GmbH (BEST)based in AUSTRIA
Further development of DFB gasification (steam gasification by means of a dual fluidized bed), thermo-chemical conversion of biogenic raw materials, residues and waste into high-quality ...
-
Manufactured by York Metal Productsbased in CANADA
Laser cutting processes are key to York Metal Products’ prototype and short run production specialization. Our 5-axis CNC laser cutter has a moving table in the X-axis and a cantilever Y-axis that has cutting capabilities for 3-dimensional and 2-dimensional applications. The laser cutter nozzle can tilt to allow access to a variety of surfaces, making it very cost effective for parts where ...
-
Manufactured by Allied Plasma Inc.based in USA
Allied Plasma will initially provide EcoPro® systems services to regional managers across the USA and Canada. These sites can be located in optimum locations that will minimize transportation costs and permitted storage delays, and provide the hazardous material generator the timely feedback that his hazmat has been completely destroyed. In time, Allied Plasma will ...
-
Manufactured by Tetronics Technologies Limitedbased in UNITED KINGDOM
Our solution which produces energy from waste is supplied via our partner, Advanced Plasma Power (APP). Working with Tetronics, APP has developed the Gasplasma process, a clean, modular and scalable advanced waste to energy and fuels technology which delivers high efficiencies whilst minimising visual and environmental impact during waste recycling. ...
-
based in CANADA
Our heating solutions can be used in a cogeneration process, to produce a combination of heat and electricity from biomass. This type of solution is extremely energy-efficient and is of great benefit to energy-intensive industries, which require both heat and electricity for process use. The excess electricity may be sold to existing utility companies, while any excess heat may be sold to ...
-
Manufactured by Plasma Etch, Inc.based in USA
Our contract services team allows your company to utilize our patented plasma treatment technologies right at our service facility. Our in-house experts will handle everything for you at our location. We then overnight your products back to you for next day ...
-
based in CANADA
Lakson can design a thermal process in which biomass waste is first transformed into a clean-burning synthetic gas, or “syngas”. This syngas is a renewable source of energy which is used, much like natural gas, in the following applications: in a gas burner, to produce heat for a boiler, dryer, furnace etc.; in a gas turbine or gas engine, to produce electricity; Under relatively ...
-
Manufactured by Bruning & Federle Manufacturing Cobased in USA
Custom components for your project are carefully integrated to provide maximum dust pick-up and filtration in an efficient mechanical system. To insure the highest quality at the lowest cost, those components are custom fabricated and fitted in our facilities. Equipped with a full service metal fabrication shop, we are able to design and produce a large array of custom products to fit your ...
-
based in USA
Thermal spraying is a process in which metallic and non-metallic materials are deposited in a molten or semi-molten form on a prepared substrate, imparting properties that the substrate would not otherwise possess. What is Thermal Spray? These processes make it possible to apply an extensive array of specialized materials including pure metals, alloys, superalloys (such as Hastelloys and ...
-
based in DENMARK
Weel & Sandvig use the following software tools as support : WS-Pinch: in house pinch analysis software. WS-Hen-Explorer: In house heat exchanger network optimization. WS-WTE-design: In house design software for grate fired biomass or Waste to energy plants. WS-WTE: Inhouse software for dynamic simulation of power and WTE plants, including control system. Openfoam/Simflow: Commersiel CFD ...
-
based in USA
As solid waste in landfills decomposes, landfill gas is released. Landfill gas consists of approximately 50% methane, 42% carbon dioxide, 7% nitrogen and 1% oxygen compounds. Landfill gas is a readily available, local and renewable energy source that offsets the need for non-renewable resources such as oil, coal and ...
-
based in GERMANY
At the Dormagen site we accept waste air and off-gas streams containing toxic substances from production facilities and incinerate them in our advanced thermal waste air incineration plant in a way that is safe, cost-effective and environmentally friendly. Alongside conventional incineration technology for gas streams containing halogens and sulfur, we also employ a regenerative thermal reactor ...
-
based in UNITED KINGDOM
We collect all food waste from commercial premises (except glass), DAF sludge, oils, fats, and slurries. We process it in our advanced AD Plant where bacteria work on the food waste in a controlled environment. The process creates biogas which is sent to Generators to create 3.2 MW of electricity, and bio-fertiliser for ...
-
Manufactured by TCD Italia srl.based in ITALY
Flaring is the combustion process used for the safe disposal of large quantities of waste gases and vapours in the petroleum and natural gas industries. Due to the fact that toxic and greenhouse gases are the main products of flaring which has devastating impact on environment and also ruin distinction of the operators of the plant specifically when accompany with black smoke, in the recent ...
-
Manufactured by MRW Technologies, Inc.based in USA
MRW maintains an inventory of numerous rental flares, rental thermal oxidizers, and portable vapor combustion units (VCUs). These systems are available for a wide range of flow rates and waste gas compositions and are delivered with complete control and ignition systems. As with all of MRW’s products and services; safety, durability, and quality are paramount to the design and manufacture ...
-
Manufactured by Mothermik GmbHbased in GERMANY
Within the scope of new developments in the MHKW-technology, it is rather difficult to deviate from known and well-tried solutions. As for innovations in practice, rather long test times are necessary, great care is advisable and a certain caution is natural. It may sound quite conservative but as long as absolute innovations do not point out other ways it is wise to follow the logical and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you