biogas filter Articles

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • What`s New? Biogas Power

    Technologies that connect the biogas line to the power line include cooling and clean up components, microturbines and reciprocating gas engines and control systems. TOP BILLING on the biogas to electricity stage typically goes to the microturbines and reciprocating gas engines. But in the theater of renewable energy from organics recycling, the show can’t go on without the supporting cast of gas ...


    By BioCycle Magazine

  • Easy payback from biogas monitoring

    There is a strong business case for biogas monitoring and CHP protection. A fixed biogas analyser may cost some £6-10,000 and monitor gas every few minutes day and night. By comparison it can save its own cost many times over by protecting CHP engines from expensive unplanned downtime, biogas engine ...

  • National brewery benefits from biogas

    Anheuser-Busch has installed anaerobic digestion systems at 10 of its 12 large breweries in the U.S., with an 11th system in design. Primary drivers are cost-avoidance for wastewater treatment fees and fossil fuel purchases. ANHEUSER-BUSCH, owner of 12 large breweries in the U.S., has committed to reduce its greenhouse gas emissions 5 percent from 2005 levels by 2010. The company is well ...


    By BioCycle Magazine

  • Allweiler Peristaltic Pumps: an ingenious solution for biogas plants

    Installations and plants used to process biomass for the production of biofuels must be capable of handling difficult conditions. For example, intermediate products in the production of biodiesel exhibit a high level of chemical aggressiveness. Accordingly, pumps, pipe connections, and fittings must be capable of resisting these demanding conditions. In addition, waste products usually contain a ...


    By ALLWEILER GmbH

  • Case study - Purification of biogas in EDAR Mapocho

    BIOCONSERVACION: Integral solution for biogas purification in WWTPs Biogas is mainly composed by methane and carbon dioxide as a result of organic matter fermentation in the absence of air by the action of a microbial consortium (anaerobic digestion). The composition of biogas depends entirely on the nature of the waste processed and the conditions under which takes place the anaerobic digestion. ...


    By Bioconservacion SA

  • Microturbines, Gas Engines Link Biogas to the Grid

    OPPORTUNITIES to produce electricity from methane are being improved continuously as manufacturers introduce new and upgraded equipment to address market needs and varying characteristics of raw biogas. In the renewable energy from organics recycling arena, the two primary types of electricity generation equipment are microturbines and reciprocating gas engines. This article provides a brief ...


    By BioCycle Magazine

  • Case study - Biogas contractor and generator using Geotech’s product

    The plant generates biogas from the waste water of their pig farm; the biogas is used as a means for waste to energy to make the farm self-sustainable Geotech works closely with their distributor within the Thai biogas market, currently their Thai distributor in Bangkok, Entech has delivered over 150 fixed and portable Geotech gas analysers to biogas plants throughout Thailand. The ...

  • Biogas CHP supplies in Uruguay electricity and heat case study

    Dreyer & Bosse Kraftwerke as a seasoned manufacturer of CHP (Combined Heating and Power) has provided a complete CHP system of series Vita for generating heat and power for a wool producer in Uruguay. The biogas cleaning system including biogas cooler and activated carbon filter were ordered and delivered as well for a smooth operation. There are 3.9 millions of sheep at this farm, about 40% ...

  • Case study - Biogas desulphurisation in the WWTP do Norte (Portugal)

    The Northern Wastewater Treatment Plant (WWTP) is one of the biggest in the central region of Portugal, servicing various municipalities. The infrastructure is located in the area of Coimbra, Leiria, taking up 6 hectares of land; it receives effluents from some 250,000 inhabitants across multiple municipalities. It has the capacity to treat around 38,000m3 of wastewater on a daily basis, 77% of ...


    By Bioconservacion SA

  • Case study: GFE Krogenskær A/S

    Substrate: Animal Manure & co-digestion Biogas flow: 1.200 Nm3/h H2S inlet: 3.000 ppm H2S outlet: 10 ppm Year of installation: 2010 The BioGascleaner was installed at Krogenskær as a replacement of another H2S filter which collapsed due to the normal H2S and biogas flow fluctuations of the ...


    By Biogasclean A/S

  • Case study - Fermentation plant Kompoferm Mini, Galmiz (Switzerland)

    Planning, delivery, installation, commissioning and trial operation of a biowaste treatment plant for production of biogas by dry fermentation. Retention: July 2014 Commissioning: March 2015 Throughput: 9,000 Mg/a green waste Components of the plant: 4 fermentation boxes, ...


    By Eggersmann Anlagenbau

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) Date Commissioned: Q2 2012 ElectraTherm installed a Green Machine in Germany at a ...


    By ElectraTherm

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) ElectraTherm installed a Green Machine in Germany at a biogas power generation ...


    By ElectraTherm

  • Organic Rankine Cycle (ORC)

    Biogas/Heat-to-Power Application using a Dreyer & Bosse CHP power unit Location: Trechwitz, Germany Site Gross Power Output Range 500Kwe + 30-35kWe from Electratherm ORC Thermal Heat Input Range: ?375-450kWt   Hot Water Input Range:? 90-95°C ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you