Central Heating Equipment For Energy Management
-
Manufactured by Suntec Energy Systemsbased in INDIA
RTQ 3S steel boilers are high efficiency boilers with horizontal, flame reversal combustion chambers and concentrically arranged flue gas pipes. They are designed for central heating and, when used in conjunction with a suitable storage cylinder, for domestic hot water production ...
-
Manufactured by Centrometal d.o.o.based in CROATIA
Hot water stoves CentroPelet ZV are wood pellet firing stoves intended for heating the room with air by means of a built-in fan and water through the radiator central heating. They are made of steel with modern design and high efficiency. They have a built-in circulation pump, safety valve, pressure switch, expansion vessel and automatic vent valve. They are standardly supplied with a remote ...
-
Manufactured by New Energybased in SOUTH KOREA
NE hot water tank made of stainless steel is applied to places where safer and cleaner water quality is required. The buffer tank is a back up water tank that stores hot water. It can be used in conjunction with solar water heating and boilers as part of the central heating system. The water is heated by the heat source (boiler, etc.) to a set temperature in the tank, and stored until ...
-
Manufactured by Numafa Cleaning & Automation BVbased in NETHERLANDS
Designed for capacities up to 1.000 crates per hour with a light soiling. The Eco Clean Master is Numafa’s standardized solution. This machine is suitable for capacities up to 1,000 crates per hour with a light soiling. The crate washer deserves its name due to its special qualities, such as low power consumption and optimal cleaning results. The ECM is modularly constructed, so processes ...
-
Manufactured by Adveco Ltdbased in UNITED KINGDOM
The Adveco MD range of high efficiency condensing boilers are designed to provide a high capacity and reliable solution to a building’s central heating demand. Manufactured by our European partner with over 50 years of experience in boiler production, the MD range consists of four floor standing condensing boilers with heat outputs from 70 to 280 kW. Each boiler features one to four ...
-
Manufactured by Technische Alternative RT GmbHbased in AUSTRIA
ATON is a plug & play solution for using surplus PV energy – without additional wiring. It consists of an energy meter and an immersion heater, which can be variably controlled from 50 W to 3 kW, for installation in a buffer cylinder. Through a wireless connection, the energy meter (x2-tech) specifies the output the immersion heater can consume. The immersion heater sends all ...
-
Manufactured by HRS Process Systems Pvt. Ltd.based in INDIA
HRS Process Systems Ltd. have acquired exclusive rights by the way of license manufacturing agreement for design, manufacture, supply and service of PLATE HEAT EXCHANGERS, with FUNKE Waermaustauscher GmbH! The gasketed PHE comprises of a plate pack mounted between fixed and pressure plates compressed with tightening bolts. Depending on the process requirement, variations in the passes can be ...
-
Manufactured by Noreus Ltd.based in UNITED KINGDOM
For 100% power self-sufficiency, choose a home fuel cell from Noreus. Not only will you take control over your electricity production (even when there is no sun or wind) but thanks to our low-carbon hydrogen technology, the only emission produced from the system is water vapour. So, it’s good for the planet too. Creating energy security for the future, our fuel cell works 365 days a year ...
-
Manufactured by Ekotek Isı Teknolojileribased in TURKEY
With OBUS home heating boiler, which has a hybrid structure, you can burn wood in the wood compartment as well as granular fuels such as coal, pomace and nutshell. It works automatically at the desired temperature with its digital panel and ...
-
Manufactured by UTET Energybased in TURKEY
Operating Voltage: 220 / 380 / 440 VAC 50-60 Hz, Fuse Current :90 A (Monofaze), 32 A (Trifaze), Consumption During Heating : 12-18 KW / Hour (Max), Total Area Of Heating :Spaces up to 600 m2 with low consumption of hot water, It has 30 linear meters boiler capacity, can supply 400 liters/minute warm water around, (40-50 C)degrees. It can supply hot water circulation till 15-20 meters long ...
-
Manufactured by Thermostahl Srlbased in ROMANIA
PELLET COMPACT PLC range is an economical alternative for pellet unit. The boiler construction is pressurized with tubed heat exchanger for bigger heated surface under reduced dimensions and smooth pellet burner ...
-
Manufactured by STSS CO LLCbased in USA
Central Heating — Solar & Wood With Storage: Heat Storage Tank: A packaged, fully manufactured, light weight tank, shipped crated 19″ wide and 54″ high. The length varies with capacity. You can walk it into your home, open the crate and have it ready to fill with water in less than an hour. Water can be circulated in a closed loop through the tank heat exchanger, or tank ...
-
Manufactured by Hewalexbased in POLAND
The KS2000 TP flat plate solar collectors are intended for hot domestic water systems in single-family homes and apartment houses, as well as commercial, industrial, and other buildings. They can also be used for heating pool water and to support central heating systems in single-family homes. ...
-
Manufactured by Zhongding Boiler Co. Ltdbased in CHINA
Zhongding oil gas fuel fire tube packaged boiler is jointly designed by Xi’an Jiaotong University, it is a kind of safe and high efficiency heating equipment with full automatic control system. Zhongding Boiler adopts the national patent technology, optimizes the design of oil gas boiler, to achieve a more reasonable combustion chamber and heating area, the thermal efficiency increases more ...
-
Manufactured by Zhengzhou Boiler Co., Ltd. (ZBG)based in CHINA
Product Category : Steam Boiler Type: ZG Capacity: 20~130t/h Pressure: 1.25~9.8Mpa Temperature: 184~540℃ Fuel: natural gas, heavy oil, LPG, coke oven gas,etc. Overview: This type of gas & oil fired power plant boiler is a vertical and field assembled gas & oil steam boiler for power generation, with large capacity (no less than 25 ton per hour), mostly adopts π-type layout and its design ...
-
Manufactured by Vaillant UK Ltd.based in UNITED KINGDOM
Every home is different. But the ecoTEC plus, with its range of heating outputs, is so flexible it can meet the demands of a whole range of homes and different lifestyles. That’s why it’s our flagship boiler. Our goal is always outstanding performance: low energy consumption for hot water and central heating – and lower fuel bills for you. The ecoTEC plus is smart: when it knows ...
-
Manufactured by Sinoyin Solares Co Ltdbased in CHINA
The solar central hot water system is a central heating system consisting of multiple sets of solar collectors and other heat sources. It can realize the effects of constant temperature water, instant heat, etc. It is more convenient and faster to provide domestic water. At present, it is popular in Hotels, Bath centre, Student apartments,Hospitals etc. With the improvement of living standards, ...
-
Manufactured by Arctic Heat pumpsbased in CANADA
The Arctic Heat Pump is a revolution in heat pump technology that remains unsurpassed in terms of cost and performance. Our Engineers designed this heat pump with a mission to make it the most efficient cold climate heat pump on the market at a price point of ½ of a traditional geothermal heat pump. This was done without any sacrifices to quality. Industry leading parts were mandated in ...
-
Manufactured by LOVATO S.p.Abased in ITALY
MACUK E S-SR PRO is an electronic Heat Interface Unit for heating and hot water applications. Thanks to the two plate heat exchanger the module also allows complete separation from the primary circuit or central plant system. Suitable for apartments, terraced houses, semi-detached house with centralized heating ...
-
Manufactured by PEWO Energietechnik GmbHbased in GERMANY
The heating substation pewoV-max is the connecting link between district or local heating system and consumer's installation. The heating substation is designed to replace central gas boilers. The heating substation is separated from the heating system by a plate heat exchanger. A heating circuit manifold is integrated as standard. All connections are located both on upper and lower side. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you