Energy Monitoring Applications available in Cameroon
-
Premium
Machine condition monitoring for trucking fleet
Overview Over-the-road trucking fleets depend on their vehicles for their business and revenue. Vehicle availability is critical and unexpected breakdowns can be costly – not only due to the cost of the repair but towing charges of a large truck and the lost revenue can add up to an expensive ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Maintenance-Free Wind Speed Lidar
The remote sensing Lidars are accepted more than ever for wind measurements in onshore and offshore farms. The maintenance-free wind speed lidar offers many advantages over using met masts alone. The advances in remote sensing technology have made wind speed lidar more reliable and accurate. The compact lidars are also mobile, relatively small and adaptable to be installed on different platforms and environments. ...
By Qingdao Leice Transient Technology Co., Ltd. based in Qingdao, CHINA.
-
Premium
Analytical Instruments for Chemical Analysis of Biofuels and Synthetic Fuels
Learn about Analytik Jena's elemental analysis techniques for the determination of metal and non-metal elements, e.g., carbon, sulfur, nitrogen and chlorine, in renewable bio- and secondary derived fuels and their variable source materials. The methods described are ideal for process control and adaptation, the quality control of final products and legal limit adherence, such as TS legal limits for ...
By Analytik Jena - an EndressHauser Company based in Jena, GERMANY.
-
Premium
Determination of aromatic hydrocarbons in electrical insulating oils
Introduction One of the most widespread liquid electrical insulating materials is transformer oil. It is used to fill the pores in the fiber insulation and the space between the windings, thereby increasing the dielectric strength of the insulation and improving the heat removal from the windings and the core of a ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Lithium-Ion Battery Safety
In our lithium-ion-powered world, battery safety is crucial. Gas analyzers, like the GT6000 Mobilis, support research work preventing disasters caused by thermal runaway reactions. They measure gases such as carbon monoxide, hydrogen fluoride, and VOCs for accurate identification. The GT5000 Terra ensures safety for first responders and EV passengers by measuring gases at the exposure point. Type approval regulations like ECE-R100 and FTIR technology in GT5000 Terra align with safety mandates. ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Energy Savings Solutions for Food Packaging Industry
A Dutch tomato and vegetable packaging company used VPVision with an integrated industrial VPRouter to analyze and enhance their compressed air usage. Together with 6 pieces of VPFlowScope M flow meters, and 3 items of 3 Phase Power Meter, the company gains a clear view from the supply to the demand ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Environment Chambers for Renewable Energy
Solar Panels, Energy Meters, Gas ...
By Aralab based in Albarraque, PORTUGAL.
-
Premium
Machine condition monitoring for power generation
Power plants are expected to operate 24 hours per day, 7 days per week. Downtime and equipment derating (when a generator fails to deliver power at its rated capacity) can cost a power plant thousands of dollars per hour. The cost of replacing failed equipment is also extremely high. Vibration analysis by itself is not enough to anticipate catastrophic failures. Oil analysis is often able to detect problems at a much earlier stage than vibration analysis. This is why more and more power plants are bringing oil ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for pulp & paper
Machine condition monitoring based on oil analysis has become an important, if not mandatory, maintenance practice for pulp and paper companies. An effective oil analysis program will keep important manufacturing assets such as pumps, gears, bearings, compressors, engines, hydraulic systems and other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled downtime. For pulp and paper companies the drying roll is at the heart of production and downtime can cost many thousands of ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Agriculture Biogas Plant Modeling
By inCTRL Solutions Inc. - a subsidiary of SKion Water based in Toronto, ONTARIO (CANADA).
-
Premium
Environment Chambers for Electronics
Automotive, Battery Testing, Cables And Wires, Explosive ...
By Aralab based in Albarraque, PORTUGAL.
-
Premium
Electronic fuel control valves solutions for renewables industry
The growing awareness and use of biomass and hydrogen as renewable energy sources is critical to future energy growth. CCC technology has been used for years to enable stable engine operation using biogas that can vary greatly in quality. The advanced designs of the CCC embedded fuel valve controls allows seamless operation with all forms of renewable gas, including blended fuel ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Premium
Environment Chambers for Aeronautics
Electronics, Coatings, Textiles, Materials, Battery Test, Cables And Wires, Explosive ...
By Aralab based in Albarraque, PORTUGAL.
-
Premium
Machine condition monitoring for food and beverage
Manufacturers of food and beverages typically have a high volume of product passing through their facilities at all times. For this reason, any unexpected downtime can be very costly in terms of lost production. In addition, many food and beverage facilities have difficult challenges associated with lubricant contamination. Many of these facilities have a lot of water or steam being used to clean and sterilize products and packaging. Water can get into the lubrication oil and become a very troublesome contaminant. ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
International testing for biofuels
Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges. ...
By Metrohm AG based in Herisau, SWITZERLAND.
-
Premium
Waste incineration line continuous monitoring solutions
In accordance with "Standard for pollution control on the municipal solid waste incineration" (draft), all existing and new the municipal solid waste incinerators need automatic continuous on-line monitoring of main ingredients in incineration flue gas. Monitoring projects should include at least HCl, SO2, NOx, soot, etc., but also need to detect CO and HF in some higher environmental requirements ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Machine condition monitoring for municipal fleet
Overview Municipal fleets include public works vehicles, public transportation and emergency vehicles. Keeping the vehicles in these fleets up and running is critical to the operations of any city or town. Many locations have their own maintenance garages to service the municipal fleet which can include hundreds or even thousands of ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for racing
Grand Prix racing utilizes cutting-edge high performance engines operation at extreme RPMs and temperatures. To keep the very valuable engines operational and competitive requires a team of mechanics paying careful attention to the engine and lubricant condition. To support this, engine condition monitoring based on oil analysis has become a widely practiced technique by Formula One racing teams. Not only do the racing teams themselves take Spectro Scientific instruments to races, but the companies that design, ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for military & aerospace
Overview Machine condition monitoring based on oil analysis has become an essential maintenance practice of military organizations throughout the world. An effective oil analysis program will keep important military assets such as planes, ships, tanks, trucks, and any other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled downtime. Mission readiness of military equipment is paramount, and proper maintenance can also decrease the long-term expense by minimizing replacement ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Borescope for Power Generation and Turbine Components Inspection
Turbines and generators are essential pieces of machinery that need to be adequately maintained and repaired to ensure maximum service life and safety. Non-destructive remote visual inspection with a video borescope is a cost-effective and efficient way to inspect without having to disassemble a turbine. Steam and gas turbines run at extremely high pressures, and they need to be kept in good mechanical shape to do their jobs ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you