Power Distribution Equipment In Europe
-
Manufactured by Elecnorbased in SPAIN
Elecnor boasts vast experience and a strong track record in gas infrastructure development in Spain and a number of Latin American markets. In Mexico, for example, Elecnor will be responsible for constructing, operating and maintaining the Morelos gas pipeline, which is approximately 160 km in ...
-
Manufactured by Elecnorbased in SPAIN
Elecnor is a leader, both domestically and abroad, in the distribution network, power transport line and transformation substation industry. As a benchmark company for the leading domestic electricity operators, it has managed to steadily and progressively increase its market share. ...
-
Manufactured by Elecnorbased in SPAIN
Elecnor has developed its own design and construction style for large-scale solar photovoltaic (PV) facilities, becoming a benchmark in the Spanish market. Also, thanks to the experience of its pioneering PV subsidiary Atersa, Elecnor now boasts one of the largest capacities to produce all the necessary components and equipment to configure any off-grid and grid-connected PV system. In Atersa's ...
-
Manufactured by Elecnorbased in SPAIN
Elecnor currently has 20 electricity transmission concessionaires in Brazil and Chile, with a combined 11,485 MVA of capacity and 5,741 km of ...
-
Manufactured by Elecnorbased in SPAIN
Feasibility studies. Cost-finance analysis. Project administration procedures. Permitting and planning management. Construction and detailed engineering project design. Turnkey construction. Operation and maintenance. Operations ...
-
Manufactured by Elecnorbased in SPAIN
Elecnor has ample railway industry experience, enabling it to carry out electrification, signalling, interlock, communications and control system turnkey projects for railways, metros, trams and trolley ...
-
PremiumManufactured by Hilliard Corporationbased in USA
HILCO PH-CGJ style filter elements incorporate conductive fibers which are co-pleated in between two layers of hi-performance microglass filter media. As a result the HILCO anti-static filter element dissipates static charge build up before discharge can occur. These style elements are available in every standard HILCO media grade ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy’s UltraVolt High Power C series of regulated DC-to-DC supplies is optimal for laser, cap-charging, pulsed power, pulse generator, and test equipment ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The 400 requires a minimum disc diameter of 24" and is offered in 2 sizes to accommodate a 1" and 1-1/2" thick disc. The design of ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Asymmetric Bias Waveform Generator for Direct Control of Substrate Voltage and Ion Energy. Advanced Energy’s eVoS platform is a revolutionary power technology for the direct control of ion energy distribution in plasma processing. The integrated, single-enclosure system delivers a customized width and precise control of ion energy for node etch and deposition applications. With a 1.2 kV ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilliard standard disc hubs are supplied with parallel or tapered bores and keywayed to accommodate customer requirements. Hubs are manufactured from either iron or steel. Special hubs with keyless locking devices are also ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
BSG 12, 32, 42 and BSG 20 Ex - for DataPro, SonicPro, EnerPro and IsoPro surge ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilco coalescing systems are the ideal way to remove moisture contamination in any liquid fuel. Hilco has been manufacturing coalescers for liquid fuels for over twenty five years. Systems are available with flow capacities as high as 1500 GPM (5700 ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER 3-split Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. The 3-skid layout is separated in a winch, an operators and a hydraulic power pack container. The hydraulic pump / motor combination guarantees high pull force and speed at any ...
-
PremiumManufactured by AVTECH Software, Inc.based in USA
Monitor temperature and active power status with AVTECH's Digital Active Power w/Temperature Sensor. This patented, award winning sensor provides the real-time power status of any electric device by simply strapping it to any AC electrical cord. There is no need to unplug the device, modify the cord, or require an electrician to connect within a main panel, making it easier than ever to monitor ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The 400 requires a minimum disc diameter of 24" and is offered in 2 sizes to accommodate a 1" and 1-1/2" thick disc. The design of ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The Koller workbenches have been designed to make and break screwed connections with high torques. To accommodate the high torsional forces, the workbenches have extremely stable and torsionally rigid frames. All available workbench equipment is equipped with dovetail mounting plates and are stepless slidable and positionable as well as turnable for 180 degrees in the ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard MK4800 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as heavy duty lift operations, conveyors, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting angle. The MK4800 is capable of producing a maximum 4,800 LBF of braking ...
-
PremiumManufactured by Koller Maschinen- und Anlagenbau GmbHbased in GERMANY
The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you