Atmos - Model DP Series - Solid and Robust Boiler
The Atmos DP boiler, is a solid and robust boiler solution for wood pellets. The Wood pellet boiler is built up with a loose pellet burner which can be placed on either the right or the left side. The pellet burner is supplied with wood pellets from the hopper by means of an Auger. The Atmos boiler can as a default be delivered with 250 L and 500 L silo.
Atmos 25 pellet burner will (when there is a need for heat) automatically feed the pellets into the burner, and turn on, and go back to standby, when it is no longer needed
Filling the hopper, cleaning of the fuel chamber and ash removal must be carried out every 1-14 days, depending on pellet quality. The boiler can be equipped with a automatic ash removal system, which will result in less maintenance.
Atmos is a gasifier boiler with a very high efficiency of over 90%.
The boiler is constructed with two chambers
The wood is placed in the upper Chamber, while the combustion of gases occurs in the lower ceramic combustion chamber.
The boiler combustion is controlled by a regulator that automatically opens and closes after the desired boiler temperature, as well as a thermostat-controlled flue gas, which automatically stopped after burnout of the the fuel. In addition, the boiler is equipped with a thermostat for controlling the pump storage tank.
Can be linked directly to the existing central heating system
The Atmos boiler is approved by the Labour Inspectorate for installation with a pressure expansion. This allows it to connect the boiler to the existing central heating systems. In addition, a new installation is often easier and cheaper.
- Performance from 4-24 kw+
- High comfort
- High efficiency 90% 93%
- The boiler is approved in accordance with EN303-5 class 3
- Can use pellets in size 6 and 8 mm.
- The boiler can be fitted with a pressure-expansion
- Automatic ignition
- Performance from 19-50 kW
- Supplied with a temperature controlled flue gas suction cleaner
- Large firebox fewer burnings per day
- Preheating of primary and secondary air provides high efficiency
- Small size and weight in relation to the performance
- Possibility for installation with push expansion