Wind Power Equipment Available In Asia & Middle East
-
Manufactured by Dongfang Electric Corporation (DEC)based in CHINA
We provide wide range of wind turbine products. Our onshore products range from 2.5 MW to 6.x MW and our offshore family range from 4.5 MW to 13 MW. With continuous innovation and experimentation, our self-developed 13MW offshore wind turbine was rolled off the production line in February 2022. ...
-
Manufactured by Clivus Multrum International ABbased in SWEDEN
This fan uses wind power to ventilate. The efficient design allows the fan to work at low wind speeds and it is not dependent on the wind's direction. The fan is made of aluminium and painted black. Capacity: 300 - 1300 m³/h depending on wind speed. Available for 110mm, 125mm and 160mm pipe. ...
-
Manufactured by Jiangsu Rongcheng Forgings Co., Ltdbased in CHINA
Material: S355NL. Size range: φ2000 -φ4200mm. Heat treatment method: normalizing + tempering. Detection method: 100% UT. Application: Wind power ...
-
Manufactured by S.W.H. GROUP SEbased in CZECH REPUBLIC
The most common use of wind today are wind turbines that use wind power to spin the propeller (wind turbine) and that is connected to an electrical generator. Theoretically possible performance is directly proportional to the cube of the speed of the flowing air masses. Since wind speed ...
-
Manufactured by CPE Cellbased in SOUTH KOREA
It is designed in cooperation with ONERA(The French Aerospace Lab) and passed France CNRS TEST(French National Center for Scientific Research). This innovative 3D blade revolutionized the energy ...
-
Manufactured by Moncada Energy Group S.R.L.based in ITALY
The Moncada Group, after having built over 200 MW of wind power plants, through its subsidiaries today owns 3 plants, located in the province of Agrigento, for a total installed power of 76 MW and a portfolio of projects for a total power of approximately 30 ...
-
Manufactured by Elecnorbased in SPAIN
In wind energy, Elecnor has not only built numerous turnkey wind farms throughout Spain for various developers, but also acts as a developer and operator through its subsidiary ...
-
Manufactured by Nantong Rainbow Offshore & Engineering equipment Co., Ltd.based in CHINA
Monopile is the most commonly used foundation type for offshore wind turbines in the world, and has been widely used in built offshore wind farm. Diameter of the monopile is 6~10m, and the length is about 100m. A large hydraulic pile hammer is used to drive monopile into the sea bed. The upper part of the monopile is connected with the ...
-
Manufactured by Nantong Rainbow Offshore & Engineering equipment Co., Ltd.based in CHINA
The first self-elevating offshore wind power installation platform in ...
-
based in ITALY
Wind power has been experiencing an extraordinary development in the last few years. And it is expected to grow at a rate of 30% per year in the near future. In Italy it has been the source that has reported the highest growth in the last decade. ...
-
Manufactured by ULMA Forged Solutionsbased in SPAIN
Over the past few years, ULMA Forged Solutions has committed to helping create a more sustainable world, allocating many of its resources and using its knowledge and technology in the renewable energy sector. The wind power sector is one of the priorities in the portfolio of large components manufactured by ULMA Forged ...
-
Manufactured by Idsud Energies – Nheolisbased in FRANCE
The nheolis self reliant wind powered lamppost were designed to recieve many applications to simplify the « city of the future » life. The R&D pole designs new systems with prospects. These applications development has no limits. Soon, nheolis systems will probably be equiped with wi-fi, traffic informations, weather, etc. ...
-
based in CHINA
Silent Wind Turbine. The Horizontal Axis Wind-Power Turbine ( HAWT ) is a new product designed. We started the research on HAWT 15 years ago. Now many of the famous experts the world wide have accepted such new technology and this technology will definitely lead the development of the small and middle size ...
-
Manufactured by Zhejiang Qihong Machinery Casting Co., Ltd.based in CHINA
Auto parts and accessories, sewing machine parts, agricultural machinery parts and accessories, hydraulic parts and accessories, transmission parts and accessories, pump parts and accessories, ...
-
Manufactured by Foshan Tanfon Energy Technology Co.,Ltdbased in CHINA
wind turbine generator 600w residential wind power energy 1) Generator use magnetic saturation technology, 20years designed life; 2) Low start wind speed; 3) Easy to install, it has small volume; 4) Anti-twist device, generator can ...
-
Manufactured by Innoventum ABbased in SWEDEN
Dalifant is a small wind turbine solution designed to yield maximum energy at a given rotor diameter. It is installed on a design-protected 20 metre wooden tower created by InnoVentum. The Dalifant is suitable for a variety of applications. It can provide electricity for an eco-farm, a larger house, a small-scale industrial site - power ...
-
Manufactured by Waltery Windpower Co., Ltd.based in CHINA
The GCI series of Grid Connected (Grid-Tied) Inverters have been created to handle both wind and PV applications. They are designed to convert the power from wind and PV into utility-grade power that can be used by the home or sold to the local electrical utility. With output powers ranging from 3kW to 30kW and a ...
-
Manufactured by Nantong Rainbow Offshore & Engineering equipment Co., Ltd.based in CHINA
MAIN PARTICULAR; Length O.A. : 120m. Moulded Breadth : 38m. Moulded Depth : 6.8m. Designed Draught : 3.8m. Service Water Depth : 40m. Complement : ...
-
Manufactured by Waltery Windpower Co., Ltd.based in CHINA
Grid-off systems are independent from the utility grid, avoiding the possibility of losing power when the grid goes down. Electricity from grid-off systems is used on site, such as an RV or cabin. Power that is generated can be stored in batteries and used on no wind days. A generator may also be used for back-up.This inverter can convert the ...
-
Manufactured by GIS AGbased in SWITZERLAND
Electric chain hoist for wind turbines. Lifting speed up to 16 m/min.. Lifting height up to 200 m. Temperature monitoring with shutdown function of the motor in case of overheating. Automatic switching from high to low lifting speed shortly before the stroke end by geared limit switch. External limit switches for hook end positions. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you