burner manufacturer Articles

  • Burner Efficiency

    The Customer The Company is a world leader in combustion technology. They design and manufacture burners for residential, commercial and industrial applications. The Process After the burners have been manufactured they must be tested to meet the standards of BTS-2000. This standard specifies the methods procedures for determining the performance and ...

  • WIRAJASA Waste Oil Burner

    Brief description on our patented Waste Oil Burner that was introduced in 2008. This innovative device works on two key principles namely pre-heating of waste oil and application of super-heated water or sub-critical steam to enhance the oxidation of heavy oil. Heating capacity of this burner is adjustable starting from 700,000 BTU/hour to 1,400,000 BTU/hour is suitable for various thermal ...


    By CV Wirajasa Teknik Industri

  • Low-Nox Burner retrofit Experiences in Cracking Furnaces at Dow, Terneuzen

    Abstract: Dow Benelux B.V. (Dow) operates three ethylene plants from the Netherlands, all based within its Terneuzen facility. In 2009, Technip Stone & Webster Process Technology (Technip) studied options to reduce the NOx emissions from the cracking furnaces of cracker 1. The results of this study, combined with the experience elsewhere within the Dow Chemical Company, have been used to ...

  • `Must Do` Waste Oil Furnance Maintenance

    Recommendations to keep your waste oil burner running at peak performance and resistant to mechanical issues, including a list of typical standard maintenance measures. Getting into a scheduled maintenance routine and making sure you're keeping your furnace running smoothly will keep it generating free heat for your business for many years to come. Failure to maintain your waste oil furnace ...

  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Maxsys Fuel System generates 6% savings on Gas Fired Steam Raising Boilers at Mondi Packaging

    Mondi is one of the world’s leading international paper and packaging groups with a substantial global presence, employing 34,000 people at 112 sites across 34 different countries. The company is continually striving for a consistent high level of improvement in environmental performance in all its operations, making efficient use of raw materials and energy, while focusing on innovation ...


    By Maxsys Fuel Systems Ltd

  • Frequency Converter energy savings on Boilers

    Boilers and heaters account for a significant share of a plant's purchased fuel cost. Combustion air fans are necessary to provide enough combustion air to the boiler or heater's burner system. Louvers, inlet guide vanes or frequency converters control the amount of air allowed into a boiler. Configuring a combustion air fan to allow the proper amount of air into the burner can improve boiler ...


  • How to prolong the service life of biomass fired boiler

    Because of the shortage of energy and environmental deterioration caused by the extensive use of fossil fuel,biomass fired boiler has played a more and more important role in the industrial boilers.Therefore,we need to focus on the following aspects of work to ensure its normal operation and prolong its service life: ...

  • oil fired boiler price in South Africa

    oil fired boiler price in South Africa  ...


  • Tips for turning a coal fired boiler to gas fired boilers

    Smog has been a heated topic among the word. Therefore , gas fired boiler substitute for coal fired boiler become a trend to protect the environment.Since the boiler is a large thermal equipment ,it is requires attention to security incidents in the transformation .Here are some tip from ZG about turning a coal fired boiler to gas fired boiler. First , when turning a coal fired boiler to gas ...

  • Fuel inefficiency frozen out at Findus

    The installation of the proven Maxsys Fuel System at the Benton Lane, Newcastle plant of Findus has reduced the natural gas consumed by its three boilers by 6.6%. This substantial saving will allow the company to recoup the outlay on its investment within an impressively brief 12 month period. Findus is a household name in frozen food. Few can claim never to have ...


    By Maxsys Fuel Systems Ltd

  • Ciba Specialty Chemicals makes energy savings of over 7% with the Maxsys Fuel Systems

    Ciba Specialty Chemicals is a world leading Chemicals Manufacturer with a global presence whose products and services are sold in over 120 countries on all continents and employing around 15,000 people at 69 sites in 22 countries worldwide. The Fuel Systems from Maxsys was able to deliver impressive gas savings of 7% to Ciba’s plant operations. The ...


    By Maxsys Fuel Systems Ltd

  • If it doesn’t exist, then we will create it

    Our customer wanted a multi-chambered cat cremation unit.  Our designers said … OK! Very often the product that a customer requires simply doesn’t exist.  It could be a groundbreaking idea that they have had, or a novel concept that they want to incorporate into their business.  Usually ideas such as these are totally innovative and nothing quite like them is ...

  • Energy efficiency: The unsung hero of our times

    As our economy continues to sputter, one little-noticed industry has been booming for a while now: energy efficiency. The sector is hiring like crazy -- a fact that speaks volumes about the close relationship between clean energy and the economic recovery that we're all waiting for. Energy efficiency could save us all. My firm works with utilities, government agencies, housing authorities, and ...

  • Business seeks viable alternatives to price cutting

    The UK manufacturing industry is undergoing a severe recession. Any business involved in production is facing serious competition from countries that can produce goods at much lower prices due to cheaper equipment, labour and general costs. Globalisation has meant that companies have had to expand their focus to include new and expanding markets. Assessing where manufacturing functions are best ...


    By Maxsys Fuel Systems Ltd

  • Waste to Energy Analysis

    The manufacturing of SRF in a single pass is not a new concept. However, with the environmental efficacy of alternative fuel production under seemingly increasing scrutiny, a one-step process is of growing importance, believes Peter Streinik, Head of Business Unit Waste at UNTHA. There can be no disputing that alternative fuel production is being increasingly acknowledged as a valuable part of ...


    By UNTHA Shredding Technology

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you