Energy Management Equipment In Wisconsin
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology has many advantages over other enclosed combustion systems. It is a robust device capable of handling varying emission flow rates and concentration ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The BgPur system is our proven solution for biogas treatment from anaerobic digesters and landfill. The system reduces hydrogen sulfide (H2S) concentrations and converts it to solid elemental sulfur for resale. The system uses a liquid chemical catalyst, compact gas/liquid contactor, and solids removal system and does not consume the chemical catalyst driving the conversion of H2S to sulfur, ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The SgPur system is specifically designed to treat sour gas from oil and gas operations. The system reduces hydrogen sulfide (H2S) concentrations and converts it to solid elemental sulfur for resale. The system uses a liquid chemical catalyst, compact gas/liquid contactor, and solids removal system and does not consume the chemical catalyst driving the conversion of H2S to sulfur, minimizing ...
-
PremiumManufactured by Hilliard Corporationbased in USA
24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard MK750 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as conveyors, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting ...
-
PremiumManufactured by Hilliard Corporationbased in USA
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize leakage. Rugged, precision-machined, straight body heavy wall steel tubing for body material—minimizes valve ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilliard Electric Brakes provide positive stopping and reliable holding of rotating devices on demand-every time. Spring engaged when current is interrupted and electromagnetically relased when voltage is applied, these brakes are designed for maximum flexibility and long, dependable service. Each brake has an easy-to-adjust wear bolt to compensate for friction service wear and extend the life of ...
-
PremiumManufactured by Hilliard Corporationbased in USA
HILCO portable filters are an economical solution for removing water and particulate from oils, fuel and other fluids. Filters can be built to ASME Code standards. Hilco portable filters can be used for many different fluids, including: Mineral-based lubricating, hydraulic, and insulating oils Synthetic lubricating and hydraulic (EHC) fluids Fuel oils, kerosene, gasoline Ethylene glycol mixes ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The H3 Power Unit is Hilliard's most advanced brake control system. With a PID Loop Control, the BBH3 Power Unit is capable of monitoring speed. The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
Manufactured by Modine HVAC, by Modine Manufacturing Co.based in USA
Our indoor power vented duct furnace line was designed for use with a building’s heating, heating/cooling, and make-up air systems. Ideal for installations that require horizontal vent systems or if the space in which the unit is located is generally under negative pressure. Available in 11 model sizes, the units cover a wide variety of applications. The input ranges from 75,000 to 400,000 ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The Jenbacher Type-2 gas engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at electrical output from 249kWe or 335kWe. The J208 is renowned for its robust design and highest levels of component durability. It is particularly well suited to troublesome gases such as landfill ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The spent byproducts of distilleries have historically been treated as waste. However, the liquid and solid wastes of the distillation industry have greater potential and can be sent to anaerobic digesters and converted into biogas. This biogas in turn can be turned into renewable electricity at high efficiency via GE Jenbacher gas ...
-
Manufactured by Oxyweld S.n.C.based in ITALY
This gas generator works only with water and electricity through the process of water’s electrolysis. The gas generated (hydrogen and oxygen) produces a neutral flame which develops a temperature of about 3650 °C and can weld, braze or solder all non-ferrous materials in a short time compared to traditional systems. The gas coming out perfectly mixed and does not require any adjustment ...
-
Manufactured by LifeLampbased in USA
Our new LifeLamp Reverse Phase IGBT Dimmer is about important choices that impact your Lighting Plan, Quality and Performance. Many competitors sell SCR (Silicon Controlled Rectifier) based dimmers or IGBT forward Phase dimmers that act like TRIAC ...
-
Manufactured by Dyne Systems, Divison of Taylor Dynamometerbased in USA
Power: 16 hp (11.9 kW) Torque: 42 lb-ft (56.9 Nm) Maximum Speed: 6,400 rpm Constant Torque Range: 0 - 2,000 rpm Constant Power Range: 2,000 - 3,200 rpm Decreasing Power Range: 3,200 - 6,400 rpm Rotation: ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you