GE Fossil Energy Equipment
-
based in USA
Introducing the J920 FleXtra Jenbacher with 49% el. efficiency 60Hz. GE proudly announces the J920 FleXtra Jenbacher 9.5 MW system for 60 Hz with best-in-class 49% el. efficiency for large gas engine power plants at APPA, Denver on June 16th. Whether you're seeking full power at high efficiency levels or a unit capable of short start-up times. GE's J920 FleXtra gas engine is an ideal, reliable ...
-
Manufactured by GE Powerbased in USA
GE’s 9HA high efficiency, air-cooled gas turbine is one of the industry leaders among H-class offerings, and now the 9HA gas turbine is at the heart of the world's most efficient combined-cycle power ...
-
Manufactured by GE Powerbased in USA
GE integrates technology, experience, and people to deliver the highest-value simple-cycle and combined-cycle power plants anywhere in the world. This value comes from technologies that provide the lowest lifecycle cost of converting fuel into ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
A GE Jenbacher gas engine module is configured for the recovery of both electricity and heat via a cogeneration / CHP configuration. As with the genset, the gas engine is linked to the alternator which produces electrical power for export. The cooling water circuits of the engine are first linked to a plate heat exchanger which facilitates the transfer of hot water to an external hot water ...
-
Manufactured by GE Powerbased in USA
Its ability to operate in island mode, coupled with multiple decades of proven rugged performance, make the 6B.03 an excellent solution for remote installations and extreme operating conditions. The rugged, reliable 6B.03 heavy-duty gas turbine is a popular choice for refineries, natural gas liquefaction power, CHP applications, and industrial ...
-
based in USA
Hybrid electric solutions are available in gear-mounted or direct-drive, shaft-mounted electric motor configurations, principally combined in a hybrid with gas turbines or diesel engines with the mode depending on speed, for example. Compact, transformerless drives are ideal for vessel space constraints. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Demand for distributed power is growing at a fast pace. Distributed Power solutions furnish power right where you are, with fewer channelling and distribution losses. The 616 Genset goes where you need it – on or off the grid, in remote locations, and even under the most demanding operating conditions, providing you with reliable power at lower fuel cost, extended equipment life and smaller ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Clarke Energy recognised the requirements for a ‘power module’ based around the GE Jenbacher Type-6 engine. The power module scope which comprises of engine, enclosure, silencer cooling system and other key ancillary components has been optimised for the requirements of the Australian coal gas and remote power ...
-
Distributed by ap+mbased in USA
ap+m supplies parts and services for many types of GE aeroderivative gas turbines. Below are some of the more commonly used engine types. The GE LM2500 is the workhorse of aeroderivative gas turbines, with more than 1,500 units in service and over 22 million operating hours with a variety of fuels and fuel/water combinations. Availability for the GE LM2500 is an outstanding 99.6%, requiring just ...
-
based in USA
GE’s 1.7-100/103 wind turbine offers a 47% increase in swept area when compared to GE’s 1.6-82.5 turbine, resulting in a 24% increase in Annual Energy Production (AEP) at 7.5 m/s. This increase in blade swept area allows greater energy capture and improved project economics for wind developers. The 1.7-100/103 uses GE’s proprietary 48.7-meter blade which has the same proven ...
-
based in USA
As part of the FlexEfficiency* 60 Portfolio of products, GE’s 7F-5 gas turbine incorporates advanced combustion technology to deliver operating flexibility, including better turndown capability, while sustaining higher levels of efficiency. This translates into increased revenue across a wide range of operating ...
-
Manufactured by GE Powerbased in USA
GE’s 7HA high efficiency air-cooled gas turbine is one of the industry leaders among advanced class gas turbine offerings and is available in three models—the 7HA.01 at 290 MW, the 7HA.02 at 384 MW, and the 7HA.03 at 430 ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...
-
based in USA
The result of continuous enhancements and extensive experience, GE's Jenbacher Type 6 gas engines are an advanced and reliable addition to our product line. Serving the 1.5 to 4.4 MW power range, the 1,500-rpm engine speed results in a high power density and low installation costs. In addition, the Type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and ...
-
Manufactured by GE Powerbased in USA
GE’s 6F gas turbines offer the superior performance, reliability, and flexibility typically associated with larger power plants. The 6F models, including the 6F.01 and the 6F.03 gas turbines, pack a lot of power into a small package, offering durability and flexibility for harsh, remote, or floating power environments. Whether it be for 50 or 60 Hz, the 6F gas turbines maintain ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you