Power Substations Equipment For Power Distribution
-
Manufactured by KONCAR - Electronics and Informatics Inc.based in CROATIA
The most important energy facilities (thermal and hydro power plants, large transmission substations, etc.) should have the highest possible reliability of power supply because the possible damage caused by a power supply failure at a critical moment can surpass by far the price of power supply. The right choice for such facilities is redundant parallel connection of two completely independent ...
-
Manufactured by Shandong BOS Energy Technology Co., Ltdbased in CHINA
UPS is a new generation power supply designed for power plants and substations. It has on-line and zero-delay conversion function. It is mainly used in places with high voltage requirements such as power remote control, RTU, DCS system, power carrier , Monitoring and so ...
-
Distributed by BTL Linersbased in USA
Transformer oil containment can be accomplished using a liner in a moat system surrounding the electrical substation transformer pad. BTL has provided dozens of power substation transformer liners for safe containment of potentially hazardous transformer oil. The custom design of liner panels makes for an ideally fitting containment system in any substation transformer installation. Reinforced ...
-
Manufactured by Ingeteambased in SPAIN
INGESAS IC3 is the unit that allows connection to the main telecontrol centres and runs the logic at substation level. It is a high-performing, highly-reliable and highly-available modular system designed for substation environments, which enables the inclusion of different communications modules with the option of power supply or communications redundancy. ...
-
Manufactured by Akhelec- GMT Groupbased in SPAIN
Modular containment bunds fitted with a fire extinguishing system for high-voltage transformers. For transformers (between 10 and 100 MVA), neutral position 300 and 1000 A solenoid valve coils, etc. Alternative solution to concrete pits when the ground is unsuitable or an urgent solution is required: areas where digging is difficult, rising ground water, tight completion deadline, ...
-
Manufactured by Baoding Zhongyi Electrical Material Manufacturing Co.,Ltd.based in CHINA
GCK series low voltage draw out switchgear is applicable for three phase four wire/five wire AC power system with rated operation voltage 380V, used for electric power receiving and feeding, reactive power compensation, electric energy calculation, lighting and motor centralized control at power plant, substation, mine enterprises, high ...
-
Manufactured by Tech Products, Inc.based in USA
EVERLAST … Nuts, Bolts & Washers 010-047000 NBA 5/16th” Aluminum Break-A-Way Nut. Requires a standard wrench or Visegrip for installation. When nut is tight, keep twisting firmly to break off hex head. 010-036500 BOW2 5/16th¬” x 2” One Way Vandal Resistant Bolt Zinc plated steel head of bolt cut away for one way tightening only straight edge screw driver. Use with ...
-
Manufactured by Eaton Corporationbased in USA
MITS is a turnkey, engineered power distribution substation solution offered by Eatons Electrical Engineering Services and Systems group. Designed to your needs, the MITS is an electrical power distribution substation assembled on a self-supporting structural base or trailer and wired together (integrated) at the factory. If you are planning to build or replace a new substation or distribution ...
-
Manufactured by Fujian RuiSen New Materials Co., Ltd.based in CHINA
A functional insulator coating to protect insulators in pollution area, such as industrial area, coastal area and other extreme environmental conditions, also can be used in normal environmental ...
-
Manufactured by SAE IT-systems GmbH & Co. KGbased in GERMANY
Many users can be integrated by bundling several FO signals on one RS-485 bus. The system consists of an mcPS-1 power supply module and up to ten mcFO fibre optic modules with two fibre optic ports each. The mcPS-1 power supply module has an integrated RS-485 connection for coupling the transmission protocol and supplies the connected fibre optic modules via bus connectors. It is possible to ...
-
Manufactured by M.M. s.r.l.based in ITALY
Fences are one of the most innovative applications of gratings and profiles by M.M. s.r.l.. These artefacts are mainly applied in areas where electrical insulation and corrosion resistance are required. In addition to outdoor installations, M.M. fences in FRP (fibreglass) are also used within factories or power plants to fence the devices under tension. Fences are designed directly by the M.M. ...
-
Manufactured by Panel Components & Systems, Inc. (PC&S)based in USA
This Hall Effect current sensor is based on open loop compensating principle and designed with a split core and a high galvanic isolation between primary and secondary circuits. It can be used for measurement of DC current etc. The output of the transducer reflects the real wave of the current carrying ...
-
Manufactured by Secure Meters (UK) Ltdbased in UNITED KINGDOM
Apex 200, series of next generation energy meter designed for power transfer points requiring precise measurements and revenue transactions. Flexible and modular communications ensure integration with AMR / AMI / SCADA systems and upgrade to future sub-station automation systems. 4 quadrant energy measurement allows monitoring of generation, transmission and distribution ...
-
Manufactured by Raycapbased in GREECE
Network reliability is a priority for electrical utilities. Supply interruptions add to maintenance costs and affect customer service. Substation faults are particularly expensive: equipment is often damaged and difficult to repair or replace, specialized post-fault maintenance may be required, and significant customer “supply” lost. Birds and animals often enter substations or ...
-
Manufactured by Zhejiang Wellsun Intelligent Technology Co., Ltdbased in CHINA
DJTZ23-WS1c concentrator is an important part of the low-voltage power line carrier wave centralized meter reading system. The concentrator complies with the series of standards of "Electricity Consumers' Electricity Consumption Information Acquisition System" of the State Grid Corporation such as Q/GDW 1375.2-2013, Q/GDW 1374.2-2013, etc., and applies the modern digital communication technology, ...
-
Manufactured by Secure Meters (UK) Ltdbased in UNITED KINGDOM
Accurate and inter-operable comms with advanced event detection for LV, MV and HV metering. Premier is a comprehensive range of CT / VT operated meters. They cover a wide range of power levels and offer flexible time-of-use tariff metering and communications capabilities. Premier 300 is the latest offering from this range. It has enhanced event detection facilities and inter-operable DLMS ...
-
Manufactured by Veraizen Earthingbased in INDIA
Veraizen Earthing are leading GI Pipe Electrode manufacturers in Mumbai India. For addressing the diverse expectations of clients, the given electrodes are manufactured in accordance with industry standards. The GI Pipe Electrode is made up of galvanised iron pipe of (medium/heavy) quality in various diameters (50, 60, 80, 100 mm) as per technical specifications and with adequate perforation on ...
-
Manufactured by S&C Electric Companybased in USA
Through S&C’s century-long history of innovation, not only have we developed deep expertise in the switching and protection technologies needed to direct the flow of electricity, we’ve become a leading provider of advanced communication systems for making the grid smarter. It’s a combination unmatched by other suppliers. This breadth and depth of experience uniquely ...
-
Manufactured by inavitasbased in AUSTRALIA
MCU++ series is an advanced compact industrial controller based on a 32-bit 454 MHz ARM CPU. With the power of Linux OS, the user can keep application development quick and simplified. MCU++ can take almost any role in remote utility applications such as solar power plants and electricity distribution substations. It combines GPRS/GSM modem, WiFi and Bluetooth, also digital inputs, outputs and ...
-
Manufactured by NovaTech Automationbased in USA
NovaTech Orion I/O™ is an extension of the family of Orion Automation Platforms for substation automation and incorporates the same security features, software tools, and NCD configuration as the OrionLX+, OrionLXm, OrionMX, and OrionSX. It is a rack, panel, or DIN rail mountable assembly with four slots that can be filled with any combination of I/O cards, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you