Gas Turbine System Equipment In Europe
-
Manufactured by Braden Groupbased in USA
A gas turbine bypass system diverts flue gases from the Heat Recovery Steam Generator (HRSG) in combined cycle mode to a bypass stack with a silencer assembly to operate in simple cycle mode. Maintenance can then be performed on the HRSG as the diverter isolates it completely from the gas ...
-
Manufactured by Eugen Arnold GmbHbased in GERMANY
Gas turbines are an indispensable component in a wide variety of industries and industries. Their flawless and safe functioning accordingly has a decisive influence on the profitability and productivity of the operation as well as on the increasingly relevant energy efficiency. A tailor-made and optimal isolation of gas turbines ...
-
Manufactured by Fiatec - Filter & Aerosol Technologie GmbHbased in GERMANY
ARAMCO Test: We offer the full ARAMCO test. Fiatec runs a test bench according to ARAMCO standard for performance testing of gas turbine filter elements. The test procedures include the complete test scope described in the standard. Up to 4 filter samples can be tested simultaneously in one run. For this purpose, a default filter ...
-
Manufactured by Société d`Acoustique Industrielle (SAI)based in FRANCE
During these last 30 years, SAI has equipped over 600 power plants worldwide with complete ventilation system with airflow that are often exceeding 1 000 000 ...
-
Manufactured by CECO Environmentalbased in USA
To achieve higher efficiency levels, gas turbine waste heat is used to generate process steam or steam turbine operation. Our Peerless-Aarding brand Gas Turbine Bypass Exhaust Duct allows flexible operation of the power island as well as the capability of starting the gas turbine ...
-
Manufactured by Braden Groupbased in USA
Consolidated Fabricators (ConFab) specializes in the engineering and manufacture of complex systems to support power generation, especially gas turbines. Both OEMs and their customers come to us to help produce complicated systems that incorporate mechanical, electrical and fluid control disciplines. With over 25 years of ...
-
Manufactured by Rochem Technical Services Groupbased in UNITED KINGDOM
; specialist cleaning system designed specifically for your gas turbine types. Rochem offers a full range of patented manual or fully automatic atomising injection systems to suit any engine ...
-
Manufactured by Rochem Technical Services Groupbased in UNITED KINGDOM
-wide. F2 can be used with any on-line/off-line injection system but for optimum cleaning results and economic usage of ...
-
Manufactured by Braden Groupbased in USA
The Innova anti-icing system prevents frost and ice formation on inlet components to protect the gas turbine, and prevent pressure drop buildup. Icing can damage blades, filter elements and other vital parts even in temperatures above freezing—ice crystals form at less than 40⁰F and greater than 50% relative ...
-
Manufactured by CECO Environmentalbased in USA
Baffles are vanes or panels utilized to direct the flow of exhaust gas, typically through the heated surfaces of a Heat Recovery Steam Generator (HRSG) / boiler (harps or modules). Our Peerless-Aarding brand baffles are designed to minimize gas bypassing the harps or modules, and they maximize the exchange of heat in the harps or modules ...
-
Manufactured by CECO Environmentalbased in USA
Simple cycle gas turbine operation is a fast and reliable way to provide flexible power demand at short notice, and we provide a range of solutions that support effective cyclic operation and the changes in thermal load which are part of the frequent start and stop cycles. Each Peerless-Aarding brand Gas Turbine Single Cycle ...
-
Manufactured by CECO Environmentalbased in USA
The gas turbine exhaust Diffuser duct or Plenum duct section is one of the major transition areas between the gas turbine exhaust and the exhaust system. The Diffuser directs exhaust gas flow through a straight flow, while the Plenum duct changes the flow of gas into a 90 degree ...
-
Manufactured by CECO Environmentalbased in USA
The gas turbine diffuser duct or Plenum duct section is one of the major transition areas between the gas turbine exhaust and the exhaust system. The Diffuser directs exhaust gas flow through a straight flow, while the Plenum duct changes the flow of gas into a 90 degree bend. ...
-
Manufactured by CECO Environmentalbased in USA
Our custom Peerless-Aarding brand Gas Turbine Internal Insulation designs are engineered to deliver maximum performance, durability and reliability based on the latest operational requirements and newest materials. In our cold casing design, the insulation system is fitted to the casing interior using a custom-designed support ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
of waste heat sources. High supply reliability thanks to self-firing function. Robust, reliable and durable. Versatile design for use with different fuel types and as a multi-fuel firing unit (oil, gas, biogas, hydrogen). Ideal for combination with combined heat and power units or gas ...
-
based in USA
The 9E gas turbine is GE's robust and proven 50 Hz workhorse. With more than 600 units shipped, it has accumulated over 23 million hours of utility and industrial service-often in arduous climates ranging from desert heat and tropical humidity to arctic cold. 9E gas turbine systems are also designed for reliable ...
-
Manufactured by Parker Hannifin Corpbased in USA
Parker designs and manufactures air turbine starters for a comprehensive range of aircraft, marine and industrial applications. Our air turbine starters are designed to meet the speed, power, safety and reliability needs of modern gas turbine engine starting systems. Parker’s unique features and innovative ...
-
Manufactured by AX Systembased in FRANCE
AX System’s high-pressure misting solution revolutionizes heat management in industrial settings. Harnessing the power of adiabatic cooling, we optimize the performance of air coolers, air condensers, and gas turbines. Our modular system projects millions of tiny water droplets, creating an efficient heat exchange and ...
-
Manufactured by CECO Environmentalbased in USA
Diverter dampers are isolation devices that are commonly used in heat recovery steam generator (HRSG) exhaust stack applications. The Peerless-Aarding brand Gas Plant Diverter Damper can be configured in a low-leak or zero-leak design, and a toggle-type or pivot style diverter damper for HRSG, waste heat recovery, natural gas turbine, and ...
-
Manufactured by CECO Environmentalbased in USA
Diverter dampers are isolation devices that are commonly used in heat recovery steam generator (HRSG) exhaust stack applications. The Peerless-Aarding brand Gas Plant Diverter Damper can be configured in a low-leak or zero-leak design, and a toggle-type or pivot style diverter damper for HRSG, waste heat recovery, natural gas turbine, and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you