McMillan - Model 106S - Liquid Microturbine Flo-Sensor
From OEM Flow Products - Liquid OEM Flow Products
McMillan Model 106S FLO-SENSORS are capable of measuring extremely low liquid flow rates from 15 mL/minute up to 50 L/minute with a full scale accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a well-deserved reputation for continuous operational service for many years without failure. Because of the compact size and economical cost of these products, the Model 106S FLO-SENSORS are suitable for a wide variety of industrial, commercial, laboratory and O.E.M. applications.
-
Most popular related searches
106S Features & Options
- ACCURACY/LINEARITY : Analog output models have an accuracy specification of ±1.0% full scale (including linearity). Pulse output models have an accuracy specification of ±3.0% full scale (including linearity).
- CALIBRATION : All units are calibrated at the factory using deionized water. Calibration curves may be requested for fluids with viscosities differing from water.
- DISPLAYS : McMillan has a comprehensive range of remote displays for use with FLO-SENSORS. Please review displays available online or request further information from the factory.
- ELECTRICAL CONNECTIONS : All units have an integrated PVC-jacketed cable terminated with pigtail leads. This 4-wire cable includes both power and signal connections. Cable length is specified in the part number.
- FLOW RANGES : Flow ranges from 15-100 mL/minute up to 5-50 L/minute are available. Consult the factory for custom requirements.
- FLUID CONNECTIONS : All units have integrated Flaretek-compatible male flare fittings.
- POWER : Units may be specified to operate with either 12 VDC or 24 VDC power. Various power adapters are available for use with 12 VDC versions.
- SIGNAL OUTPUTS : Units may be configured for either pulse output or analog output. Analog output choices include 4-20 mA, 0-5 VDC, and 0-10 VDC.
- UHP APPLICATIONS : If you wish to measure the flow rate of a high purity fluid, consider the Model U705 or Model U706 instead.
- WETTED MATERIALS : All units have only PTFE, perfluoroelastomers, and sapphire wetted parts.
Customer reviews
No reviews were found for McMillan - Model 106S - Liquid Microturbine Flo-Sensor. Be the first to review!