Only show results available in Virginia? Ok

Thin-Film Photovoltaic System (Solar Photovoltaics) equipment

  • BSC - Model a-Si Thin Film - Photovoltaic Module

    BSC a-Si Thin Film PV modules are designed to meet international standards, customer specifications, and environment-friendly.  conceming with project IRR(Interest Rate of Return). Investing in BSC solar module is a smart choice due to the fact that BSC solar module starts generating power from Sun Rise until Sun Set.  BSC modules are ...

    By BANGKOK SOLAR CO., LTD. based in Banpho, THAILAND.

  • GEROLD - Model TFPV - Thin-Film-Photovoltaic

    Frontend automation: Clean room suitable belt and roller conveyors. Automation, including process equipment handshakes. Accumulator & Buffer systems - integrated production. Carts & Auto-loader - non-integrated production.

    By Maschinenbau GEROLD GmbH & Co. KG based in Nettetal, GERMANY. from Photovoltaics Product line

  • 4JET - Laser Edge Deletion of Thin Film Solar Cells

    Our systems for laser edge deletion of thinfilm solar panels offer numerous advantages over mechanical sandblasting or the use of grinding wheel technology.Touchless process without glass damage or micro cracks. Dry process without blasting grid or chemicals, less waste Volume, more environmentally friendly. Effective ablation of TCO, ...

    By 4JET Technologies GmbH based in GERMANY. from Photovoltaics Product line

  • Schüco - Model AL and BL series - Thin-Film Modules

    The Schüco thin-film modules MPE in the AL und BL Serie (AL = Amorphous Laminate, BL = Blackline Laminate) make the maximum specifi c outputs per installed kWp output possible with innovative management of light and their low level of dependency on the outside temperature. The rear struts for structural reinforcement of the Schüco ...

    By Königsolar based in Vienna, AUSTRIA. from Photovoltaic- Thin-Film Modules Product line

  • Silicon Thin-Film Cells

    Silicon thin-film solar cells are based on amorphous (a-Si) or microcrystalline silicon (μc-Si). These solar cells require semiconductor layers (absorbers) of a thickness up to 2 μm. The semiconductor layers are deposited at low process temperatures on large-area, low-cost materials, primarily glass, but also on metal strip or polymer films. ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • Micromorph Thin-Film Solar Cells

    Micromorph thin-film solar cells combine both amorphous and microcrystalline silicon in one cell and belong to the group of the so-called multi-junction cells for which two (tandem cell) or more semiconductor layers are deposited alternately one above the other. As for micromorph silicon tandem cells, the absorption spectra of amorphous and ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • CIS Thin-Film Solar Cells

    The basis of a CIS thin-film solar cell is a compound semiconductor based on copper, indium, selenium and/or sulfur – CuIn(Ga)(Se, S)2. The p‑conducting CIS layer of up to 3 μm thickness is combined with an n‑conducting CdS‑buffer layer (up to 50 nm). Adding gallium to the semiconductor increases the energetic efficiency ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • CdTe Thin-Film Solar Cells

    CdTe thin-film solar cells are composed of a transparent conductive front contact layer,a thin n-conducting CdS-layer, a p-conducting CdTe absorber layer and a metallic back contact. The preferred substrate material is glass, just like with a-Si/µc-Si and CIGS thin-film cells. However, the use of metal strip and polymer films (PI) is also ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • GPP - Solar Glass Inspection

    SurfaceInspect.Glass is the GPP test system for the inspection of glass panels. The main purpose of this system is the quality inspection of glass panels for thin film solar modules or protective glasses for silicon based thick solar modules. The inspection proceeds on-the-fly. Thus, the test system integrates seamlessly into automated large-scale ...

    By GPP Chemnitz mbH based in Chemnitz, GERMANY. from Photovoltaics Product line

  • UniSolar EnerGen - Thin-film Photovoltaic Module

    A breakthrough in the roofing industry, the EnerGen™ system from CertainTeed features integrated UNI-SOLAR® thin-film photovoltaic laminates that seamlessly integrate with traditional asphalt roofing shingles and provide utility savings for homeowners. The lightweight and aesthetic design requires no rooftop penetrations, ...

    By United Solar Ovonic based in Rochester Hills, MICHIGAN (USA). from Residential Products Product line

  • NovoVellum - Model HiPo FW01 - Thin Film Photovoltaic Modules

    This EVA series product line is formulated for specific thin film photovoltaic modules. The EVA is formulated with a UV stabilization system, a bonding system and a stable and fast curing system. They are a proven solution for high quality module manufacturing offering high light transmission and delivering outstanding photo-thermal stability. ...

    By NovoPolymers NV based in Puurs, BELGIUM.

  • Gamesa - Model E-630 kW - Inverters

    Maximum reliability and robustness, underpinned by Gamesa’s experience in the demanding wind energy sector. Optimal performance combined with a high degree of flexibility in the design and the layout of the solar plant panels. Ventilation system that prevents overheating and accumulation of dust. Designed to comply with the most stringent ...

    By Siemens Gamesa Renewable Energy based in Madrid, SPAIN. from Photovoltaic Product line

  • Utility-Scale Solar Modules

    Sharp’s thin fi lm product pairs amorphous silicon with a layer of Sharp’s proprietary microcrystalline silicon to achieve higher stability and better performance than previously thought possible for thin film solar. This tandem-junction architecture captures more of the solar spectrum and converts more sunlight into electricity. It is ...

    By Sharp Solar Energy Solutions Group based in Huntington Beach, CALIFORNIA (USA). from Thin Film Products Product line

  • Molybdenum Exposure on CIGS Solar Panels

    During the production of CIGS and similar thinfilm solar cells the molybdenum layer covering the glass has to be exposed in selected areas in order to prepare for welding or glueing processes. This requires removal of the only several hundred nanometers thick semiconductive layers without damaging the metal layer underneath. 4JET´s ...

    By 4JET Technologies GmbH based in GERMANY. from Photovoltaics Product line

  • NovoVellum - Model FC03 - Crystalline Silicon and Thin Film Photovoltaic Modules

    The EVA series product line is formulated for all crystalline silicon and thin film photovoltaic modules. The EVA is formulated with a UV stabilization system, a bonding system and a stable and fast curing system. It is the proven solution that is widely accepted as a standard encapsulating method in the PV industry. NovoVellum FC03 is a 32% VA ...

    By NovoPolymers NV based in Puurs, BELGIUM.

  • Thin-Film Solar Cells

    Thin-film solar panels, also known as thin-film solar photovoltaic cells, are made by placing several layers of very thin photovoltaic material onto a substrate. Much less efficient than crystalline silicon panels, these types of solar cells are mostly advantageous because they are so cheap. In fact, if you hav

    By Evergreen Solar based in Washington, DISTRICT OF COLUMBIA (USA).

  • Model Genius AS series - Thin-Film Module

    Genius AS thin-film module With the Genius AS|zentralsolar deutschland adds to its module range based on innovative thin-film technology.When compared to modules with crystalline cells, the Genius AS series impresses with its superior performance in low-light conditions.This benefit pays off especially in photovoltaic systems that are not ...

    By ZSD GmbH zentralsolar deutschland based in Emsbüren, GERMANY.

  • Thin Film PV

    The solar cell is one kind of energy conversion photoelectric element. After the sunlight illumination, the light energy can be converted to electrical energy by this element. This kind of photoelectric element is called the Solar Cell and also can be called Photovoltaic (abbreviation PV). The solar cell generated electricity can be connected to ...

    By Kenmos PV based in Tainan, CHINA.

  • NovoVellum - Model FC05 - Crystalline Silicon and Thin Film Photovoltaic Modules

    The EVA series product line is formulated for all crystalline silicon and thin film photovoltaic modules. The EVA is formulated with a UV stabilization system, a bonding system and a stable and fast curing system. It is the proven solution that is widely accepted as a standard encapsulating method in the PV industry. NovoVellum FC05 is a 28% VA ...

    By NovoPolymers NV based in Puurs, BELGIUM.

  • Thin Film Modules

    Moser Baer a-Si thin film modules are frameless Glass-PVB-Glass modules and are available in quarter, half and full size configurations offering a range of power outputs for different customer applications. These modules are ideal for large grid connected Photovoltaic Systems and provide excellent performance. Automated inspection and in-house ...

    By Moser Baer Solar Limited based in INDIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you