incineration furnace Articles
-
Flow metering of hearth furnace coke - Case Study
Customer: Waste incinerator plant Material: Hearth furnace ...
By ENVEA
-
Performance Test Results of the Macrotek Flooded Disc MVA Scrubber
Fundamental design principals of the flooded disc scrubber - a variable throat orifice contactor are presented. Test data from the pilot demonstration unit and full scale operations on lime kiln, refining furnace, and incinerator applications are presented and compared. Conclusions are that performance on a given application is a function of pressure drop and particle size distribution. In ...
-
Waste co-incineration in the European Community, is the sky the limit?
The co-combustion of waste in industrial furnaces -co-incineration- attracts considerable interest in the European Community, because of the combination of perceived business incentives, regulatory developments, and the slate of available technological options. It was found, however, that EU-regulation developed to ensure safe and environmentally acceptable processing of waste represents a clear ...
-
Flow measurement to control the exhaust gas cleaning in waste incineration - Case Study
Customer: Waste incineration plant Material: Hearth furnace coke Installation: Pneumatic conveying line, exhaust air cleaning Function: Control and dosing of the hearth furnace coke quantity for exhaust air cleaning APPLICATION In a waste incineration plant exhaust gases are produced during the incineration process that have to be cleaned. For this purpose, hearth ...
By ENVEA
-
Industrial Performance with High-Temperature Refractory Bricks
In the world of high temperature industrial applications, the role of refractories cannot be underestimated. Of these, high temperature refractory bricks stand out as the cornerstone of efficient and reliable operation in various fields. In this article, we will discuss the importance of high temperature refractory bricks, their various applications, and the key factors to consider when selecting ...
-
The Other Side of Zirconium Oxide case study
Regular Fuel Efficiency Applications Separate Oxygen and Combustibles Sensors In standard flue gas applications for Thermox analyzers, the user generally tries to extract the maximum energy from the fuel and transfers as much of that energy as possible to the process. These applications require the process to be operated as efficiently as possible by keeping both oxygen (excess air) and ...
-
Thermal Treatment Technologies
Hot gas decontamination: Hot gas decontamination is a technology still in the pilot-scale of development that can be used for decontamination of explosives-contaminated masonry or metallic structures. The method involves sealing and insulating the structures, heating with hot gas stream to 260 °C (500 °F) for a prescribed period of time, volatilizing the explosive contaminants, and destroying ...
-
Case study - LKAB, Sweden
Customer: LKAB, Sweden Project: WetESP pressurized - Processgases Blast Furnace Year 1997 LKAB installed a pilot Blast Furnace at Swerea- MEFOS, Luleå. The product gas contains both CO and H2. The Blast Furnace operates at 0,8 bar over pressure. The design pressure for the WESP is 1,5 bar. The emission standards for dust are < 10 mg/Nm3. This gave WESP as the optimal choice. Result; ...
-
Case study - Perstorp Speciality Chemicals AB,Perstorp, Sweden
Customer: Perstorp Speciality Chemicals AB,Perstorp, Sweden Project: Chemical Waste Incinerator operating WESP Perstorp AB started up their Chemical Waste Incinerator year 2007. The emission standard to meet stated < 5 mg/Nm3. With a standard as low as 5 mg the natural choice ended up in a WESP. Result The plant has operated continuous mode since 2007. On-line measurements shows emissions ...
-
Case study - SP, Technical Research Institute of Sweden
Customer: SP, Technical Research Institute of Sweden Project: WetESP for Fire Laboratory Many fire tests are made in full scale. Example for fire tests can be engine rooms, vehicles, store houses, compartments etc. Most of the tests will include ignite phase, full fire and extinguishing. The ignite phase is sooting, full fire will give high temperatures (500-700 °C) and the extinguish phase ...
-
A Comparison of Fluid Bed and Multiple Hearth Biosolids Incineration
Abstract Incineration has been used as a disposal method for wastewater treatment biosolids for over sixty years. The first multiple hearth furnace for biosolids incineration was built in 1935 in Dearborn, MI. From that time through the late sixties, the multiple hearth was the thermal technique of choice for biosolids disposal. Today there are still some 150-175 aging multiple hearths in ...
-
What Are Fire Resistant Bricks?
Introduction Fire resistant bricks, also known as refractory bricks, are essential materials designed to withstand extreme temperatures and challenging conditions in various industrial applications. These specialized bricks are engineered to provide exceptional thermal stability, high heat resistance, and resistance to thermal shock, making them a reliable choice for environments where standard ...
-
Flow metering of hearth furnace coke in a waste incineration plant for the bonding of pollutants - Case Study
Client: Waste incineration plant (to generate electricity) Product: Hearth furnace coke Conveyed volumes: 10...15 kg/h Conveyor mechanism: Rotary conveyor Installation location: in the free-fall line after the rotary conveyor What measuring process was used previously: none According to the client, the system offers the following advantages: Continuous flow metering Little ...
By ENVEA
-
Enhancing Furnace Performance with High Alumina Refractory Bricks
In industrial applications, proper material selection plays an important role in ensuring process efficiency, longevity and safety. High alumina refractory bricks have become an integral part of high temperature environments such as furnaces, kilns and incinerators. These specialty bricks are highly resistant to heat, corrosion and wear, making them an important choice for industries ranging from ...
-
Different Types of Refractory Bricks
Refractory bricks are essential components in various high-temperature applications, providing thermal insulation and resistance to extreme conditions. From industrial furnaces to kilns and incinerators, refractory bricks play a crucial role in maintaining structural integrity and optimizing operational efficiency. However, not all refractory bricks are created equal. In this article, we will ...
-
European Oil and Gas from Exploration to End User
Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you