wood gasification Articles

  • Co-gasification of wood and polyethylene with the aim of CO and H2 production

    Abstract  This article describes the gasification of polyethylene–wood mixtures to form syngas (H2 and CO) with the aim of feedstock recycling via direct fermentation of syngas to ethanol. The aim was to determine the effects of four process parameters on process properties that give insight into the efficiency of gasification in general, and particularly into the optimum gasification conditions ...


  • Co-gasification of wood and polyethylene with the aim of CO and H2 production

    This article describes the gasification of polyethylene–wood mixtures to form syngas (H2 and CO) with the aim of feedstock recycling via direct fermentation of syngas to ethanol. The aim was to determine the effects of four process parameters on process properties that give insight into the efficiency of gasification in general, and particularly into the optimum gasification conditions for the ...


    By Springer

  • Cleaning Up Gasification Syngas

    Documento sin título ...


    By Merichem Company

  • Exergetic performance assessment of gasification and pyrolysis processes of pre-treated wood board wastes

    This paper investigates exergetic performance of gasification and pyrolysis processes and compares their exergy efficiencies, using the experimental data on a two-step process of thermo-chemical conversion of Wood Board (WB) wastes. The exergy values of biomass samples change from 17.49 MJ/kg to 24.57 MJ/kg, respectively. Hydrogen produced from pyrolysis step of gasification varies between 17 ...


    By Inderscience Publishers

  • Preliminary studies of lignocellulosics and waste fuels for fixed bed gasification

    This study was carried out to understand the decomposition behaviour of a range of biofuel and waste feedstock during gasification in a downdraft gasifier. A laboratory scale large sample thermogravimetric analyser (LSTA) is used which allows the data on burn-out characteristics of different fuel particles to be measured under agitated conditions. The conditions chosen simulate the combustion ...


    By Inderscience Publishers

  • The development of biomass gasification technology towards market penetration in China

    Biomass is the second most frequently used fuel, after coal, in China, which accounts for 20% of primary energy consumption. Though the main usage of biomass is for household cooking, the newly developed biomass gasification technology, especially the circulating fluidized bed gasification (CFBG) technology, has laid the foundations for allowing biomass gasification industry penetration into the ...


    By Inderscience Publishers

  • Possibility of biomass gasification in tea manufacturing industries in Assam, India

    Tea manufacturing industries in India use natural gas, tea drying oil, wood, and coal for process heat. India is the second largest producer of tea [(1,137.07, China 1,761.00) million kilogram] in 2012. About 0.6–1.2 kg of coal is required to produce one kilogram of dried tea with average moisture of 2.5–3 percentage (w.b.). Biomass gasification is an established renewable energy technology for ...


    By Inderscience Publishers

  • Research on gasification process of loose biomass material with oxygen-enriched air in fluidised bed gasifier

    Fluidised bed gasification technology with oxygen-enriched air suitable for gasifying loose biomass materials was developed. Gasification experiments with different biomass materials such as rice straw, rice hull, wheat straw, sawdust and municipal wastes, were carried out. The tests showed that biomass materials can be gasified continuously at a temperature between 600 and 750°C. The heating ...


    By Inderscience Publishers

  • Using Venturi Scrubber Technology for Syngas Cleaning

    As part of our nation's program to reduce dependence on fossil fuels, various gasification technologies are being applied. These processes take renewable organic material and, through the application of heat and pressure, convert the materials into syngas for further use. Arguably, in nearly all of these processes, the most critical design aspect is the reliable and efficient removal of ...


    By Bionomic Industries Inc.

  • Energy from biomass and waste – case studies in China

    With its vast territory and abundant biomass resources, China appears to have suitable conditions to develop biomass energy. It has long been recognised that it is important to develop advanced technologies for conversion of biomass into clean and convenient fuels in order to raise the efficiency of biomass energy utilisation and alleviate air pollution. Through past efforts some progress in ...


    By Inderscience Publishers

  • Renewable energy in chemical industry – the case of formic acid production

    This paper analyses the economical viability of replacing fossil energy by renewable sources by taking CO2 emission legislation into account. A single chemical industry case, formic acid production, is studied in a tangible manner to provide a concrete example for industrial managers and legislators. The practical case was supported by examining scientific and other databases. This study ...


    By Inderscience Publishers

  • Bioenergy opportunities in the pulp and paper and sawmill industries

    Fernando Preto said the Canada Centre for Mineral and Energy Technology (CANMET) Energy Technology Centre in Ottawa is “not a fundamental research lab…. We help industry develop technologies.” The Biomass and Renewables Group “took a different approach, asking, ‘What’s the converted value of one dry tonne of wood?’” Preto’s team made a number of assumptions about pellet-generated heat, power, and ...

  • Case Study: Replacing Natural Gas For Industry

    Renewable Energy Systems Offset Fossil Fuels with Sustainable Fuel Supply PHG Energy’s patented downdraft gasification systems were first deployed for for Boral Brick Manufacturing at facilities in Alabama, Georgia and Tennessee. The technology was used to offset natural gas costs, which were then consistently topping $10 per decatherm. Twelve of the 8-ton/day gasifiers were ...


  • The feasibility of producing alcohol fuels from biomass in Australia

    Apart from cost, the net production of energy is the most important factor in evaluating the feasibility of producing renewable fuels from woody biomass. Unlike sugar, the effort required to make woody materials fermentable is considerable, and has been a major barrier to the use of such materials to produce renewable fuels. The Energy Profit Ratio (EPR) of fossil fuels is declining rapidly as ...


    By Inderscience Publishers

  • Ethanol, Biomass Plants Planned for Minnesota

    Proposed facilities prepare to turn organic residuals into electricity, methane and synthesis gas “with minimal emissions and more profit.” AN ETHANOL plant in Little Falls, Minnesota is building an on-site gasifier that will convert wood waste and distiller's grains to gas for generating electricity and heat to serve the needs of the Central Minnesota Ethanol Cooperative. At the same time, ...


    By BioCycle Magazine

  • TAIM WESER, at the forefront in biomass cogeneration solutions

    The state-of-the-art biomass gasification plant, developed by TAIM WESER utilizing proprietary technology, is now up and running successfully, joining the range of technological products offered by the company. This solution offers clients high energy efficiency, streamlined processes and a design that, owing to its compact dimensions, allows the equipment to be installed at the location where ...


    By Taim Weser S.A.

  • The recent development of biomass energy in India: an overview

    This paper presents the current status and use of Biomass Technologies (BTs) in India. Different technology routes such as gasification, combustion and cogeneration are being actively developed to promote conversion of biomass materials such as agricultural, forestry and agro-industrial residues into electric power. The promotion of scientifically designed models of wood/biomass fired efficient ...


    By Inderscience Publishers

  • Small-scale heat and power at B.C. mills

    Fred Scott introduced the B.C. Bioenergy Network (BCBN) as an alliance between Pristine and Nexterra Energy Corp. BCBN is a network of 15–20 individuals, with 10 MW power plants located across B.C. at mill operations in forest communities. Nexterra has developed a proprietary gasification technology that “takes wood waste material and [produces] clean burning synthetic gas or syngas,” Scott said. ...

  • Study of the performance and exhaust emissions of a spark-ignited engine operating on syngas fuel

    To resolve the problem of depletion of petroleum based liquid fuels, various solutions have been proposed. One of them is the use of gaseous fuels that are generated from the gasification of woods, namely syngas or wood-gas fuels, as full supplement fuels in spark ignition internal combustion (IC) engines. This fuel consists of nearly 40% combustible gases, mainly hydrogen and carbon monoxide ...


    By Inderscience Publishers

  • Production of synthetic gasoline and diesel fuels by alternative processes using natural gas, coal and biomass: process simulation and economic analysis

    The problem of producing synthetic liquid fuels by alternative routes is addressed. Industrial processes known as Gas To Liquid (GTL), Coal To Liquid (CTL) and Biomass To Liquid (BTL) are considered: they use natural gas, coal and biomass as feedstocks, respectively. By means of process simulation, it is shown that the fuel produced on a weight basis per unit of feedstock (natural gas, coal and ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you