Fuel Standards Applications available in Connecticut
-
Premium
Heat Exchangers Solutions for Fine Chemicals Sector
The fine and speciality chemicals sector often deal with high-value products, expensive raw materials and high capital costs. In this environment product integrity and process efficiency are paramount. The production of compounds for use in everything from paints and pigments to fuels and additives, pesticides to cosmetics and toiletries requires high standards of security and quality control. The exact requirements will depend on the chemicals involved and their properties. Some single substances will require ...
By HRS Heat Exchangers Ltd. based in Watford, UNITED KINGDOM.
-
Premium
Machine condition monitoring for biofuels
Overview The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Processing of Alternative Fuels for the energy industry
RDF is a fuel that is normally produced from waste with high calorific value. The original waste comes from households, industry and commerce and is processed for energy extraction; it is meant for co-incineration plants and replaces standard fuels (e.g. coal) in production plants for cement, power plants or other co-incineration ...
By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.
-
Cellulosic Technology for General Biomass and Global Warming
General Biomass Company was founded in 1998 to do something about global warming. Since our founding, the General Biomass web site has carried information on global warming as a public service. This will now be focused on potential technology solutions and public policy. General Biomass needs and welcomes support from investors, partners and applicants to develop our own ability to contribute to solutions. Our area of expertise is cellulosic technology to make glucose and xylose from biomass. Glucose from ...
By General Biomass Company based in Evanston, ILLINOIS (USA).
-
Oilfield Power Systems for Oil & Gas Industry
Flared gases and NGLs can be re-purposed as fuel for flex-fuel, low-emissions LPP Combustion Power Systems, lowering production costs, reducing logistical burdens, and addressing Gas Capture Plan and other compliance issues with flaring and emissions. The Lean, Pre-mixed, Pre-vaporized (LPP) equipment enables clean combustion of liquid fuels in gas turbines and industrial boilers and burners. In addition to flare-gas NGLs, the LPP Combustion Oilfield Power System also operates on a variety of traditional liquid ...
By LPP Combustion, LLC based in Columbia, MARYLAND (USA).
-
Engine and Generator for OEMs
We work directly with original equipment manufacturers (OEMs) to optimise the efficiency of their engines and generator sets (gensets) through lower fuel consumption and reduced ...
By Bowman Power Group Ltd based in Southampton, UNITED KINGDOM.
-
Onsite Industrial Hydrogen Generator for Hydrogen Industry
Hydrogen Fuel Cell vehicles are superior to other fuel alternatives - including battery electric vehicles. Long Haul and Public Transportation will lead Hydrogen Fuel Penetration. Hydrogen fuel vehicle sales expected to grow exponentially - USA is behind in number of fueling stations to support growth. Alternative Fuel - 20,000 Battery Electric Fueling Stations - Less than 100 Hydrogen Fueling Stations #opportunity. Hydrogen Fueling stations is the MISSING infrastructure to drive vehicle growth and ...
By PowerTap Hydrogen Fueling Corp. based in Aliso Viejo, CALIFORNIA (USA).
-
Petroleum & Gas Purification
Activated Carbon is used for the recovery of economically valuable products like gasoline vapors, benzene and solvents at petroleum refineries. MFAR manufactures Activated Carbon with high working capacities for these special applications. Activated Carbon is the best adsorbent for removal of hydrogen sulphide gas (H2S) during the process of sour crude oil in refineries. ...
By IndoCarb Corporation Inc based in Pittsburgh, PENNSYLVANIA (USA).
-
Greasezilla solution for biofuels sector
Fats, Oils and Grease are the biggest untapped opportunity in the renewable fuel market today. Generating Biofuel from a Waste Stream. The environmental impact of reclaiming Brown Grease as an Advanced Biofuel makes the Greasezilla? FOG separation solution incredibly innovative. Currently, the majority of FOG collected in the United States is landfilled or incinerated as a waste product. Greasezilla? is changing this dynamic by processing FOG into a Brown Grease conversion-ready feedstock. By recovering fuel ...
By Downey Ridge Environmental Company (Greasezilla) based in Lansing, WEST VIRGINIA (USA).
-
Earthquake protection solutions for Diesel/Jet Fuel Shutoff Industry
Many facilities store or pump large volumes of diesel or jet fuel product. There is the potential for spillage from an earthquake- especially during transfer operations. EPO (Emergency Power Off) buttons used to manually shutoff the fuel in response to emergencies may not be accessible in an ...
By Earthquake Safety Systems, Inc. based in Placerville, CALIFORNIA (USA).
-
Vacuum and heat transfer technology solutions for power & energy industry
Graham is a provider of products and services to the power generating industry including Steam Surface Condensers, Steam Jet Ejectors and Liquid Ring Pump Systems to support turbine generator operation for various applications. Waste to energy, including biomass, municipal solid waste, landfill methane and others sources are used to produce electric power. Operation of many cogeneration, nuclear, geothermal, combined heat and power and combined cycle power generating facilities run on Graham ...
By Graham Corporation based in Batavia, NEW YORK (USA).
-
Spilling Equipment for Combined Heat and Power Industry
Spilling steam engines and back pressure turbines are always used in process and heating steam systems, when the pressure difference between the boiler plant and consumers is to be used for extracting mechanical or electrical ...
By Spilling Energie Systeme GmbH based in Hamburg, GERMANY.
-
Hydrogen Refueling and Distribution Station for Hydrogen Industry
Today, HRS is perfectly positioned to meet the needs of the carbon-neutral hydrogen mobility market. Thanks to the capacities they offer (from 14 to 80 kg/hour), HRS hydrogen stations are compatible with the needs of a wide range of vehicles, including light vehicles, as well as buses, lorries and also heavy vehicles. To meet the needs of tomorrow, HRS is currently developing capacities for 1 ton and above. ...
By Hydrogen Refueling Solutions based in Champ-sur-Drac, FRANCE.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you