Steam Boilers Equipment For Energy Management In USA
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
For the past 45 years, ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels, and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, steam turbine gland systems, ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated experience in the electric heating field. Easy and ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Electrode boilers utilize the conductive and resistive properties of water to carry electric current and generate steam. An A.C. current flows from an electrode to one phase to the ground using the water as the ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
Distributed by George K. Moss Co., Inc.based in USA
The Moss PLC solid fuel fired boiler control panel uses the latest technology and software that allows you to operate your boiler around the clock safely with minimum supervision. This system is at the heart of our new solid fuel boiler systems or retrofits, which makes old boiler systems operate like new. The Moss design is supplied with a panelview screen to provide you with a high quality view ...
-
Manufactured by PBS Velká Bíteš, a.s.based in CZECH REPUBLIC
In addition to delivering its own turbines, main condenser and its pumps, PBS also provides a complete condensate management system. If requested by the customer, it also provides the exhaustion of steam from the ...
-
Manufactured by Clayton Industriesbased in USA
Clayton Heat Recovery Steam Generators are in operation around the world serving co-generation plants, thermal oxidizers, incinerators and many other applications. Systems are able to produce high pressure steam—up to 450 psig—as well as high temperature hot water. Clayton manufactures two types of heat recovery ...
-
Manufactured by PBS Velká Bíteš, a.s.based in CZECH REPUBLIC
Industrial boilers of our own design supplied in power ranges from 10 to 80 t ...
-
Manufactured by Boilerroom Equipment, Inc (BEI)based in USA
Steam accumulators are used for storing steam. The primary uses are for flattening out the pressure swings on boilers in a non-steady state type of operation or for use when a steam demand requires a large amount of steam for a relatively short period of time with a long time of no demand in between the demand cycles. Smaller and more economical boiler systems utilizing an accumulator can be ...
-
Distributed by Brad Thompson Companybased in USA
The pressing need to lower emissions from fossil power plants has focused worldwide attention on renewable sources of energy such as solar, wind, geothermal and biomass. Concentrated Solar Power (CSP) plants have emerged as strong contenders for alternate sources of energy. Rapid advances in mirror technology have slowly but steadily narrowed the gap in the capital investment between solar power ...
-
Manufactured by Hydro-Thermal Corporationbased in USA
The Hydron 400 Series is the most precise, accurate, and versatile Sanitary Hydroheater available. Its modular 3-A certified design delivers optimal process flexibility and stability in an easy to use and maintain package. Hydro-Thermal’s Hydron Sanitary Hydroheater is a perfect fit for applications in the food & beverage and pharmaceutical industries. The Hydron is 3-A certified making ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
For those geothermal resources with a temperature generally above 190ºC, a single-flash type of plant is often the best economic choice. Higher temperature reservoirs will typically produce both water and steam under natural pressure. This two-phase flow is usually directed to a separator that allows the steam fraction to be piped to the plant and the water fraction to be piped back into the ...
-
Manufactured by Superior Boiler Works, Inc.based in USA
Superior Boiler Works, Inc. would like to introduce a product that will change the way our industry sees condensing boiler technology. The Creek XL condensing boiler can be used as a high efficiency heating boiler. The heart of the Creek XL is a robust titanium infused stainless steel heat exchanger – the key to its high efficiency. This design allows the boiler to withstand the ...
-
Manufactured by Indeck Power Equipment Companybased in USA
A complete line of “A” type boilers are offered to provide the ability to fire the dirtier fuels while still incorporating the benefits offered with a package designed steam gener ator. The “A” type boiler is fully shop assembled, rail shippable up to steam capacities of 300,000 PPH. If your project requires an industrial boiler, watertube steam packaged boiler or other ...
-
Manufactured by Durag Groupbased in GERMANY
The D-HG 400 high energy ignition device is suitable for the ignition of gas or liquid fuels in industrial burners of any ...
-
based in NORWAY
Steam Power Plants are critical elements of any network’s generation portfolio, but they are often punished for their inflexibility. With increased intermittent renewables, more volatility in the electricity markets, and increasing uncertainty in future revenues, steam power plants are turning to the thermal battery to render their fleets more responsive to an increasingly complex grid. The ...
-
Manufactured by AERCO International- Watts Water Technologiesbased in USA
The Benchmark® Platinum is AERCO’s most advanced commercial condensing boiler yet featuring a powerful bundle of innovative technology and components that optimize your premium system and maximize efficiencies by up to an additional 9% ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you