Combustion Temperature Monitoring Downloads
-
Premium
NOXtreme - High Temperature Flare - Brochure
The high temperature flare is the further developed NOXmatic flare for the safe and low-emission combustion of landfill, bio or other special gases within a temperature range from 1000 – 1200 °C. In this temperature range the oxidising gas components are fully processed, thus greatly reducing the formation of nitrogen oxides. With a special burner technology and combustion chamber ...
-
Low NOx Burners DMPJE Brochure
B .C.E. “DMPJE” type burners are equipped with two air registers suitable for any kind of liquid and/or gaseous fuel with the possibility to fire one ore more fuels at the same time. Combustion air is divided into “primary” and “secondary” flows resulting in stratified combustion. This solution allow a general reduction of combustion temperature and therefore ...
-
Encore Combustio - Model ECD InvisiFire Series - Enclosed Combustion Device - Brochure
Provides ground based, completely hidden combustion process. Provides smokeless combustion of heavy waste gas vapors. The combination of residence time, elevated combustion temperatures, and a turbulent mixing zone create greater combustion ...
-
Encore Combustion - Model Bio-VCU Series - Bio-Gas Enclosed Flare System - Brochure
Suitable for use in all bio-gas applications – landfill, wastewater treatment, food processing, breweries, etc.. Provides ground based, completely hidden combustion process. Provides smokeless combustion. The combination of residence time, elevated combustion temperatures, and a turbulent mixing zone create greater combustion efficiency. Temperature controlled to ensure the highest ...
-
Hofstetter - Biogas Flares - Brochure
For any situation, in which biogas cannot be utilized, our medium temperature flares are the ultimate solution for reliable and save gas disposal. Our medium temperature flare is the ideal solution for typical biogas with methane concentrations of 60 – 75%. Its operation is completely automatic. The flare starts by pressure signal or start command from an external control system. The basic ...
-
Ecogreen - Model 500 - Waste Incinerator Brochure
As a Waste Incinerators for General & Municipal Use, medical ,use , hospital use and animal use, solid incinerator use, industrial use, and general and mobile Incinerator Manufacturer & supplier we introduce Ecogreen-500 model incinerator is latest design for waste treatment; include medical waste, animal and pet cremation, industrial and solid waste, Hotels waste, Slaughterhouse and ...
-
Ecogreen - Model 150 - Waste Incinerator Brochure
As Medical, industrial, general and Animal Incinerator Manufacturer & supplier we introduce Ecogreen-150 model incinerator is latest design for waste treatment; include medical waste, animal and pet cremation wastes, industrial and solid waste, Hotels waste, Slaughterhouse and fields waste, general waste, in Disaster Relief Operations, Remote areas waste, and other waste disposal and ...
-
Lekea - Model MK 130/160 - Boiler Unit Brochure
The Lekea MK 130/160 boiler is designed for heating with 80x80cm straw bales. The burner chamber is manufactured from strong steel sheet and fitted with a firebrick at the top, thus ensuring the high combustion temperature and efficient fluegas combustion. The fluegas convector made from strong steel pipes transfers the heat to the water and offers the efficient utilization of the remaining heat ...
-
Model SC - Flare Systems Brochure
Shrouded flame flares with no visible flame and automated control of combustion air allowing a combustion temperature of 1,000ºC and 0.5 seconds retention ...
-
Model MC - Flare Systems Brochure
The MC range of flare stacks provides a combustion strategy which holds the gases at 1200oC for the specified retention time. This takes to its realistic limit this form of combustion control. The key to this form of technological solution is to raise the temperature of the combustion process to 1200oC and retain the combustion gases at this temperature for an extended period of ...
-
Furnace / Heater Tube Inspection Report
Thermal patterns show anomalies along the tube surfaces normally associated with scale / combustion deposits. Temperatures have decreased slightly from the last ...
-
Model Hi-R-Temp - Thermal Fluid Heaters Brochure
The HI-R-Temp thermal fluid heater is a forced circulation coil type thermal fluid heater in which fluid circulates through a set of coils. More efficient than helical coil type heaters, the HI-R-Temp® thermal fluid heater coils are parallel connected and have a minimum of seven concentric layers. The pump is sized specific to the flow rate and pressure drop requirements of each ...
-
Model HSK-RA 100 - Woochip Boiler Brochure
The very special features of this boiler series are that the high temperature combustion chamber is integrated into the boiler body and thus the radiant heat of the fireclay bricks is diverted to the boiler water. The moduating boiler has combustion chamber cleaning with an ash removal paddle and automatic cleaning of the heat exchanger tubes with de-ashing auger. The possible operating modus is ...
-
Model HSK-RA 50 - Woochip Boiler Brochure
The very special features of this boiler series are that the high temperature combustion chamber is integrated into the boiler body and thus the radiant heat of the fireclay bricks is diverted to the boiler water. The moduating boiler has combustion chamber cleaning with an ash removal paddle and automatic cleaning of the heat exchanger tubes with de-ashing auger. The possible operating modus is ...
-
Model HSK-RA 60 - Woochip Boiler Brochure
The very special features of this boiler series are that the high temperature combustion chamber is integrated into the boiler body and thus the radiant heat of the fireclay bricks is diverted to the boiler water. The moduating boiler has combustion chamber cleaning with an ash removal paddle and automatic cleaning of the heat exchanger tubes with de-ashing auger. The possible operating modus is ...
-
Model HTV Support - High-Temperature Flares Brochure
High-Temperature Flares for environmentally compatible combustion, lean gases require added support gas, such as natural gas or propane. Here again, the controlled gas/air ratio ensures the required combustion temperature of >1000 °C inside the combustion chamber. As a variation from the standard technology, in this flare type the required quantity of support gas is added to the ...
-
Model HTV Advanced - High-Temperature Flares Brochure
If the combustion air is heated upstream of the combustion process, the consumption of the support gas required for the combustion of lean gases can be significantly reduced. The necessary heat is taken from the exhaust gas and guided into the combustion chamber via heat exchangers. If the dimensioning is right, for example methane concentrations of down to 12% can be burned without the need for ...
-
Heat Recuperative Oxidizers Brochure
Ecology - Heat recuperative oxidizers The Heat Recuperative Oxidizers allow the recovery of energy from the combustion of hydrocarbons without generatingpolluting emissions.The oxidization in a combustion chamber at temperature between 700 and 1200°C (and with residence time between 0.6 and 2seconds) is the most simple method to destroy polluting compounds.This technology is used with high VOC ...
-
Saacke - Model CCS-HT Series - Combustion Chambers for High Temperature Applications - Brochure
Combustion chambers with refractory brickwork reach their limits as soon as increased heat flow requirements are placed on the downstream process (for example in intermittent operation, if the temperature changes quickly or with short startup and shut-down times). SAACKE offers a series of proven and cost-effective solutions with various designs of all-steel combustion chambers. Because of the ...
By SAACKE GmbH
-
Furnnox - Ultra Low NOx Direct Fired Furnace Burners Brochure
Ultra-Low NOx Direct Fired Furnace Burners. Eclipse Furnnox burners set new standards for emissions and flexibility. Tests show that the burners deliver lower emissions than any of its competitor's burners. The Furnnox is capable of producing NOx emissions less than 30 ppm at 3% O2 in most high temperature applications. To achieve high efficiency, the burner is controlled on-ratio throughout the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you