Only show results in Virginia? Ok

advanced combustion equipment

  • C-nox - Model HTV Advanced - High-Temperature Flares

    If the combustion air is heated upstream of the combustion process, the consumption of the support gas required for the combustion of lean gases can be significantly reduced.  The necessary heat is taken from the exhaust gas and guided into the combustion chamber via heat exchangers. If the dimensioning is right, for example methane ...

    By C-nox GmbH & Co. KG based in Neumünster, GERMANY. from High-Temperature Flares Product line

  • Premium

    Flare/Combustors

    Catalytic Combustion's Enclosed Combustor System is designed to safely burn combustible process vapors that have varying energy content. The advanced Enclosed Combustion System preheats like a direct fired thermal oxidizer. When the high BTU gas is introduced into the combustion chamber, the Enclosed Combustor turns off the supplemental fuel ...

    By Catalytic Combustion Corporation based in Bloomer, WISCONSIN (USA). from Flare/Combustors Product line

  • Frontline BioEnergy - Combustion Turbines

    The ability to gasify at elevated pressures provides a big advantage for combustion turbine systems, since this lowers the parasitic power requirement for compression of the fuel gas.  Addtionally, Frontline's PMFreeGas™ advanced syngas cleaning technology (patent pending) goes a long way toward achieving the syngas cleanliness required ...

    By Frontline BioEnergy, LLC based in Ames, IOWA (USA). from Combustion Turbines Product line

  • Combustion LIF Systems

    Laser-Induced Fluorescence (LIF) is the most powerful technique for experimental diagnostics of combustion processes available today. Based on the physics of interaction between light and molecules, LIF allows for species selective measurements with high sensitivity, enabling measurements of also minor combustion species to be made. The technique ...

    By Dantec Dynamics based in Skovlunde, DENMARK. from Combustion LIF Systems Product line

  • Challenger - Thermal Combustion Systems

    CHALLENGER Thermal Combustion Systems will strengthen your bottom line by reducing, or even eliminating your energy and disposal costs altogether, through the combustion of renewable fuel sources, also known as Biomass.

    By Advanced Recycling Equipment, Inc. (A.R.E.) based in St. Marys, PENNSYLVANIA (USA). from Thermal Combustion Systems Product line

  • Biogasmart - Model EMR - Advanced - Flare Stack

    EMR-Advanced flare is a safety device typically installed in biomass plants where there are no specific restrictions relevant to fumes exhaust height, minimum combustion temperature, and a partially visible flame is accepted. All the equipment is fitted on-board, contained in a stainless steel frame which simple design and small footprint allow ...

    By Biogasmart based in Gadesco Pieve Delmona, ITALY. from Advanced - Flare Stack Product line

  • ORLIGNO - Model 100 - Pellet Combusting System

    The ORLIGNO 100 with pellet burner is an extension of the functionality of a multi-boiler with the ability burn pellets. Interchangeable doors allow free transformation from the traditional to high performance pellet. The construction was designed so that in both cases there is no compromise. Thus, both the combustion of conventional fuels and ...

    By Eko-Vimar Orlański based in Otmuchów, POLAND. from Pellet Combusting System Product line

  • Doosan Lentjes - Tailored Grate Combustion Systems

    Benefit from the most advanced thermal waste treatment available, using our proven grate combustion technology. We design and build to your individual requirements, helping select the ideal grate system for the make-up of your waste content. Reciprocating grate. Counter-reciprocating grate. Roller grate.

    By Doosan Lentjes GmbH based in Ratingen, GERMANY.

  • Preferred - Advanced Performance Burner

    The Preferred AP burner is a low NOx, high efficiency, natural gas and/or fuel oil fired burner for firetube and small watertube boilers. It features: 30 ppm NOx without FGR. Low excess air operation throughout the turndown range. High turndown (10:1) firing natural gas. .

    By Preferred Utilities Manufacturing Corporation based in Danbury, CONNECTICUT (USA). from Advanced Performance Burner Product line

  • Novo Energy - Advanced Gasification System

    Novo has continuously refined and advanced the patented features of the ACS technology, including the pneumatic pulsing of the fuel bed.  Novo’s technology advancements include a pulse bed gasification system, the Aireal Gasification System (“AGS”).  The AGS technology is designed for gasification of various biomass ...

    By Novo Energy, LLC based in Fort Collins, COLORADO (USA).

  • Next Generation Combustion Systems

    The second major research field is the development of next generation combustion systems with the central aim to further increase efficiencies and decrease emissions, moving towards near zero emission operation. The R&D strategy focuses on the development of modular concepts of biomass furnaces and boilers.

    By BIOENERGY 2020+ GmbH based in Graz, AUSTRIA. from Next Generation Combustion Systems Product line

  • Premium

    AEREON - Model Mach-1 - Fixed Orifice Sonic Flares

    Mach-1 sonic flares are used in both onshore and offshore applications to dispose of high pressure waste gas streams with high smokeless capacities. By efficiently inducing high volumes of ambient air for more complete, smokeless combustion at sonic velocities, this advanced flaring technology allows for reduced levels of radiation and can be ...

    By AEREON based in Austin, TEXAS (USA). from Fixed Orifice Sonic Flares Product line

  • HydroMax - Advanced Gasification Technology

    Gasification is the process of converting carbon-based materials such as biomass, coal, petroleum coke, and waste into a 'synthesis gas' that can then be used for a myriad of applications including the production of liquid fuels, synthetic natural gas, electricity and hydrogen. While the concept and practice of gasification is well-known and ...

    By Diversified Energy Corporation based in Gilbert, ARIZONA (USA).

  • Enerac - Model M500 - Handheld Portable Combustion Efficiency Emissions Analyzer

    Enerac invented the first electronic portable multi-parameter combustion analyzer in 1979 (in the USA). Enerac still services this analyzer as well as all others Enerac has manufactured. The Enerac Model 500 is a low-cost, easy to use (no technical expertise needed) portable combustion efficiency emissions analyzer. The Enerac 500 is perfect for ...

    By Enerac Inc. based in Holbrook, NEW YORK (USA). from Handheld Portable Combustion Efficiency Emissions Analyzer Product line

  • Arbor ElectroGen - Advanced Gasification Biomass CHP System

    Arbor ElectroGen is a proven, Advanced Gasification, biomass-fuelled combined heat and power (CHP) system that delivers cost-effective, low-carbon heat and power for a variety of applications. Now available in the UK and Ireland from LowC Communities Ltd, the Arbor ElectroGen range offers exceptional operational performance, with incredibly-low ...

    By Arbor Heat & Power. Company based in Stamford, UNITED KINGDOM.

  • Premium

    GE Jenbacher - Model Type-6 - Gas Engine

    Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Gas Engine Product line

  • Premium

    Precision Metal Fabrication

    Laser: Bystronic ByStar 4020 cutting laser is extremely versatile. In addition to flat materials, tubes and profiles can also be processed by our laser cutting system. The Bystar is the most efficient laser in the marketplace. Processing capability of sheet metal up to 6' 6' x 13'. Processed metal can be cut up to 1' carbon steel and 1' stainless ...

    By Catalytic Combustion Corporation based in Bloomer, WISCONSIN (USA).

  • Waste2Tricity - Proven Technology

    Waste2Tricity advances EfW deployment projects that use the proven high temperature gasification process to generate syngas (synthesis or energy gas) to power efficient and proven internal combustion engines (ICE) or gas turbines (GT) to generate electrical power.

    By Waste2Tricity based in London, UNITED KINGDOM.

  • Model COB - Wall Mounted Oil Condensing Boiler

    Opt for the highest standard of condensing technology, ideal for most buildings, from its space saving design, it is particularly suitable for straightforward replacement of your old central heating boiler. The COB impresses with its economical, clean and efficient oil combustion. In contrast to old oil boilers, combustion in this generation of ...

    By Wolf GmbH based in Mainburg, GERMANY. from Wall Mounted Oil Condensing Boiler Product line

  • GE - Model 7F-5 - Gas Turbine

    As part of the FlexEfficiency* 60 Portfolio of products, GE’s 7F-5 gas turbine incorporates advanced combustion technology to deliver operating flexibility, including better turndown capability, while sustaining higher levels of efficiency. This translates into increased revenue across a wide range of operating conditions.

    By General Electric based in Fairfield, CONNECTICUT (USA). from Gas Turbine Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you