Waste Gas Flare Equipment In Canada
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301 Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97310 Enclosed Burner removes harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or governmental ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300 Waste Gas Burner is designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300M is a low cost, basic, Waste Gas Burner designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas Enclosed burner incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters or landfill gas. This unit has no visible flame which makes it ideal for residential areas. ...
-
Manufactured by Filtervac International Inc.based in CANADA
Meet the exacting standards of the latest Environmental code with a Canadian designed and manufactured Thermal Oxidation Waste gas flares by Canada’s leader in municipal gas ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased turbulence in the ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
Simply put – a pilot is continuous, it’s always on. The pilot flame serves to light the waste gas stream exiting the flare, or inside an incinerator, or any other combustion unit. You need to have an available fuel gas supply in order to install a continuous pilot. An ignitor (or ignition system) is an intermittent ...
-
Manufactured by Prism Integrated Solutions Inc.based in CANADA
The Gas-Tight Tank Package is a quick and dependable method to produce your single well site or non-utilized sites during drilling programs. Our package offers more features and benefits when compared to other systems and operates under a wide range of production ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
Purge gas (or "purge flow") is required to prevent air impingement in the process header where there is little or no process flow going to the flare (as in the case of a dedicated intermittent or ESD flare). If air should enter the flare stack, a release of process gas could result in a combustible mixture ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Mach-1 sonic flares are used in both onshore and offshore applications to dispose of high pressure waste gas streams with high smokeless capacities. By efficiently inducing high volumes of ambient air for more complete, smokeless combustion at sonic velocities, this advanced flaring technology allows for reduced levels of ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
A flare stack refers to an elevated vertical stack used for burning off unusable waste gas in a variety of oil and gas production applications. Waste gases are either uneconomical to recover/retain, or released during planned or unplanned over-pressuring of plant equipment. Waste gases are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you