Only show results available in Virginia? Ok

Wind Turbine Monitoring equipment for Wind Energy

  • SoyutWind - Model 500 - Wind Turbines

    Optimum Wind Speed 12m/s. Cut-in Wind Speed 3m/s. Cut-out Wind Speed 25m/s. Rotor Diameter 49 m. Swept Area 1.885,7 m2. Tower Height 46 - 52 m. Temperature -20 - 50 oC. Blade Type Fiberglass, composite. Tower Type Conical Steel / Composite Coating Over Steel Lattice. Control System PLC. Yaw System (Wind orientation control) Electrical. Pitch ...

    By SOYUT Enerji A.S. based in Sincan, TURKEY. from Grid Tie Systems Product line

  • SoyutWind - Model 20 - Wind Turbines

    Optimum Wind Speed 12m/s. Cut- in Wind Speed 4 m/s. Cut - out Wind Speed 25m/s. Rotor Diameter 11 m. Swept Area 95 m2. Tower Height 16-18m. Temperature -20 - 50 oC. Blade Type Fiberglass, composite. Tower Type Conical Steel / Composite Coating Over Steel Lattice. Control System PLC. Yaw System (Wind orientation control) Electrical. Pitch Control ...

    By SOYUT Enerji A.S. based in Sincan, TURKEY. from Battery-Powered Systems Product line

  • W2E - Model 100/2.0 - Wind Turbine System

    Rated power: 2.05 MW. Rotor: 100 m. Wind class: IEC 3a. Cut-in wind speed: 3.5 m/s. Rated wind speed: 11.5 m/s. Cut-out wind speed: 25.0 m/s. Capacity factor*: 3,975 h, 45%. Sound power: 105,8 dB(A). Hub height tubular tower: 85 m | 100 m. Hub height lattice tower: 117 m | 141 m. Drive train concept - LARUS Compact: Main gearbox in combination ...

    By W2E Wind to Energy GmbH based in Rostock, GERMANY.

  • W2E - Model 116/2.0 - Wind Turbine System

    Rated power: 2.0 MW. Rotor: 116 m. Wind class: IEC 3a. Cut-in wind speed: 3 m/s. Rated wind speed: 11 m/s. Cut-out wind speed: 25 m/s. Sound power: 105 dB(A). Hub height tubular tower: 100 m. Drive train concept - LARUS Compact: Main gearbox in combination with torque bearing as a. Plug & Play-system. Electrical configuration: Double fed ...

    By W2E Wind to Energy GmbH based in Rostock, GERMANY.

  • Model WES 50 - Wind Turbine

    The WES50, with a rotor diameter of 20 meters, is specifically designed for areas with lower wind speed (class III). This two bladed wind turbine, with an new cover, is a reliable 50kW midsize wind turbine with a high performance. The mechanical part of the WES50 is based on the original, proven design from 1983. For the electrical ...

    By Wind Energy Solutions BV (WES) based in Spanbroek, NETHERLANDS. from Wind Turbine Product line

  • WES - Model 250 Series - Wind Turbine

    The WES250 is a two bladed, high performance, reliable midsize 250kW wind turbine with a rotor diameter of 30 meters. The mechanical part of the WES250 is based on the original, proven design from 1983. For the electrical parts providing power conversion and control, the latest technology is used. WES250 turbines are manufactured and exported by ...

    By Wind Energy Solutions BV (WES) based in Spanbroek, NETHERLANDS. from Wind Turbine Product line

  • SoyutWind - Model 10 - Wind Turbines

    Optimum Wind Speed 12m/s. Cut-in Wind Speed 4 m/s. Cut-out Wind Speed 25m/s. Rotor Diameter 8m. Swept Area 50,3 m2. Tower Height 12-15m. Temperature -20 - 50 oC. Blade Type Fiberglass, composite. Tower Type Conical Steel / Composite Coating Over Steel Lattice. Control System PLC. Yaw System (Wind orientation control) Electrical. Pitch Control ...

    By SOYUT Enerji A.S. based in Sincan, TURKEY. from Battery-Powered Systems Product line

  • Spica - Model SCS I - Wind Turbine Control System

    With The Spica Turbine Controller wind turbine owners can replace the old control system with a new controller that offers the newest standards in communication and parameter settings. By monitoring the old wind turbine, it is possible to reduce downtime by easy fault finding and increase the availability through predicted maintenance. The Spica ...

    By Spica Technology ApS based in Silkeborg, DENMARK.

  • Bora Energy - Model 60 kW - Wind Turbines

    Design Specification: Design Class: IEC Class 2. Max Avg. Wind Speed: 42.5 m/s. Performance: Rated Wind Speed: 9 m/s. Operating Range: 2.5 - 25 m/s.

    By Bora Energy based in Wood Dale, ILLINOIS (USA).

  • ANTARIS - Model 3.5 kW - Small Wind Turbines

    Permanent-magnet rotor, brushless, gearless, maintenance-free. Extremely strong permanent magnets for a high level of efficiency. (NdFeBo permanent magnets, resistent to temperatures up to 150° C). Special ball bearings for reliably taking up radial and axial forces. 3-phase current. Separate rectifier. Either direction of rotation. Voltage ...

    By BRAUN Windturbinen GmbH based in Nauroth, GERMANY. from Small Wind Turbines Product line

  • High-performance Blade Design

    The rotor is the first phase of the energy transformation process from kinetic wind energy into mechanical torque, and as such is where investment in technology should be maximised. Aerodynamics is overlooked by many wind turbine designers because they do not understand what is possible; as such they continue to use out-dated technology and design ...

    By Anakata Wind Power Resources Ltd based in Carencero, LOUISIANA (USA).

  • Saiam - Model SAV-15W - Mini Vertical Axis Wind Turbine

    Self starting in low wind. Low noise and vibration, no be affected by turbulence. Capture wind from any direction, no limit on terrain, low requirement on mast height and floor space. Aluminum alloy integral extrusion molding achieves high strength and light weight. Simple module structure, easy for installation and maintenance. Birds friendly.

    By Zhangzhou Saiam Power Technology Co.,Ltd. based in Zhangzhou City, CHINA. from Vertical Axis Wind Turbines Product line

  • Model PITCH ROD, V52 - Compatible With Vestas Wind Turbines

    Part number manufacturer: 773223. Product group: Other mechanical parts. Wind turbine brand: Vestas. Quantity: 1. Measurement unit: pcs. Lead time: 24h. Condition: New. Warranty: No. Exchange components: No.

    By Recycled Renewables Ltd based in Argyll, UNITED KINGDOM.

  • Turbowinds - Model T500-48 - Wind Turbine

    Turbine type: T500-48 Dual speed. Rated Power: 500 kW. Wind class: II A (8.5m/s maximum).  Rotor diameter: 48 m.  Hub height: 50/60 m

    By TURBOWINDS SA/NV based in BRUXELLES, BELGIUM.

  • W2E - Model 2.0 2.0 MW - Wind Turbine

    The light weight wind turbine technology provides turbines for various locations. The W2E-93/2.0 turbine is most suitable for standard wind conditions and the W2E-100/2.0 for low wind speed sites. Both stands for most efficient wind power plants in its class.

    By W2E Wind to Energy GmbH based in Rostock, GERMANY.

  • Zenia - Model 10 Kw - Wind Turbine

    Data transfer via GPRS. On-line surveillance of turbine. View your data on PC or smart phone. Easy installation and service

    By Zenia-Energy A/S based in Ikast, DENMARK.

  • Spica - Wind Turbine Temperature Monitor

    The temperature Monitor provides added surveillance to existing or new construction/machines (e.g. wind turbines) where critical parts need to be monitored (e.g. bearings or cooling liquid).  Due to the magnets on the backside of the module, the Temperature Monitor can easily be mounted anywhere on a metal (iron) surface. All connection is ...

    By Spica Technology ApS based in Silkeborg, DENMARK.

  • WindKing - Supply wind turbines, wind generator FROM 1KW TO 5KW

    FD6.0-5KW WIND GENERATOR parameter blade diameter: 6.0m number of blades: 3 blade material: fiber glass rated wind speed: 10m/s start wind speed: 3m/s working wind speed: 3-25m/s security wind speed: 40m/s rated output power: 5kw max output power: 7kw rated speed: 220r/min type of generator: permanent-magnets- 3 phase A.C. speed regulation: ...

    By Qingdao windking windpower generator co.,ltd based in Qingdao, CHINA.

  • Femtogrid - Wind Power Optimizers

    The Femtogrid Wind Power Optimizer is a DC/DC converter per urban turbine, which maximizes energy by performing Maximum Power Point Tracking (MPPT) per urban turbine.

    By Femtogrid Energy Solutions BV based in Aalsmeer, NETHERLANDS. from Power Optimizer Product line

  • General Electric - Model 2.85-100 and 2.85-103 - Wind Turbine

    GE's 2.5 MW series wind turbine platform moves to a wider range of site applications by introducing the 2.85-100 and 2.85-103 wind turbines for increased customer value. GE's 50.2 meter proprietary blade design offers a 9%+ AEP increase over the 2.5-100. Focusing on performance, reliability, acoustic emissions, efficiency, and multi-generational ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you