Fuel Efficiency Equipment For Energy Management In Canada
-
Manufactured by Agrofrost NVbased in BELGIUM
Fans are balanced in both length and width to eliminate vibration and provide a long ...
-
Manufactured by Advanced Engine Technology Ltd. (AET)based in CANADA
The AVERO diesel powered generator sets are light weight, compact, fuel efficient, and extremely rugged. These small, Polar-Lite Canadian developed generator sets are designed for Arctic winter conditions. They are the only diesel generator set that can be left exposed to Arctic winter conditions for several months and then be hand started at temperatures down to -46°C without any battery ...
-
Manufactured by Clean Combustion Technologies ABbased in SWEDEN
Clean Combustion Start-up Burner systems have been designed for energy intense industrial applications. High Turn Down fuel injectors are integrated in Start-up Burner stations. Turn Down Ratio of 10:1 is achivable when using the complete BMS and control. Thats give the possibility to run on only 10% of Maximum capacity needed. Ideal for Recovery Boilers and Power Boilers that need a easy and ...
-
Manufactured by Schwankbased in USA
ultraSchwank radiant tube heaters are ideal for use incommercial or industrialfacilities that demand heavy duty heating applications such as warehouses and manufacturing ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Biogas 97300M is a low cost, basic, Waste Gas Burner designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained throughout the wide range of pressure and BTU ...
-
Manufactured by John Deerebased in USA
Built on the highly reliable platform of their predecessors, these models are loaded with even more customer-inspired productivity-and uptime-increasing features. John Deere PowerTech EPT Final Tier 4 (FT4)/EU Stage IV diesels provide generous displacement, power, and lugging ability. Daily checks and maintenance access are even easier. And all new K-Series-II Loaders come with a standard ...
-
Manufactured by Prism Integrated Solutions Inc.based in CANADA
The true fail-safe design of the Prism Premier Pilot is dependable and consistent under the harshest of environments, the Auto Relight is used to relight the pilot in the rare case where flame failure may ...
-
Manufactured by NORAM Engineering and Constructors Ltd.based in CANADA
Efficient gas exchanger designs with improved heat transfer performance and high reliability ...
-
Manufactured by CMI Groupebased in BELGIUM
Innovative concepts for reheating furnaces to improve energy efficiency and product quality. For carbon, stainless and silicon steel, CMI has developed its Optimfl@me® reheating furnace: a patented furnace design that considerably improves heating quality, decreases energy consumption, reduces pollutant emissions and increases production flexibility. The CMI reheating furnace is designed to ...
-
Manufactured by John Deerebased in USA
The 60G’s compact size and reduced-tail-swing design enable this small-but-mighty machine to specialize in close-quarters work. But that’s not the only reason to run one. Its highly fuel-efficient, direct-injected diesel meets rigid Final Tier 4 emissions standards and is noticeably quiet so you can put it to work almost anywhere, any time. Standard-equipped with backfill blade, ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301T Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper ...
-
Manufactured by Thermogenics Inc.based in CANADA
Preheat or process water from waste heat, three to seven percent average fuel ...
-
Manufactured by Clean Combustion Technologies ABbased in SWEDEN
Clean Combustion Load Burner systems have been designed for energy intense industrial applications. Through active innovation and modular design we ensure each system provides improved efficiency and reliability. High Turn Down fuel injectors are integrated in Load Burner stations. Turn Down Ratio of 20:1 is achivable when using the complete BMS and control. Thats give the possibility to run on ...
-
Manufactured by Multiquip Inc.based in USA
Multiquip introduces the LT6K5 Series light tower. It is compact, mobile, and combines features to tackle the demanding requirements found in construction, mining, energy exploration,security and event applications. The units provide total fluid containment, and the trusted Kohler Tier IV (F) engine genset provides exceptional power for lighting and electrical ...
-
Manufactured by Valley Agro Services Ltd.based in CANADA
Brock Axial Heaters: Brock’s GUARDIAN Series Axial Heaters are available in 24-,26-and 28-inch (610-,660-, and 711-mm) diameters to match your grain conditioning needs. Low temperature heaters are also available. Heater models are available for use with liquid propane, propane vapor, or natural gas fuels and utilize gas-certified solenoid valves. Brock-supplied regulators are standard on ...
-
Manufactured by Omega Liquid Waste Solutions Incbased in CANADA
Environmentally friendly Saves fuel, Reduces noise (dB), Minimizes wear on pump, Simple installation, Compact design 5” x 7” x 4”, In cab mount for clean trouble free operation, All components mounted in nema 4 ...
-
Manufactured by Caterpillarbased in USA
The C9.3 ACERT propulsion engine has a B rating of 375 bhp (280 bkW) at 1800 rpm, a C rating of 416 bhp (310 bkW) at 2100 rpm, and a D rating of 476 bhp (355 bkW) at 2300 rpm. The C9.3 propulsion, auxiliary, and generator set engines have a common rail fuel system for optimal combustion and lower emissions. Cooling system options for the propulsion and auxiliary engines include heat exchanger ...
-
Manufactured by Cleaver-Brooksbased in USA
The Cleaver-Brooks CBEX firetube boiler featuring EX technology is a completely integrated boiler, burner, and controls system. Every core component has been designed and built by Cleaver-Brooks to work together, resulting in the most efficient and lowest-emissions firetube system ever built. The CBEX achieves higher operating efficiency than competitors' boilers, leading to lower fuel ...
-
Manufactured by Cleanfix North America Inc.based in CANADA
The CLEANFIX Pulstronic/Hytronic System is connected to the motor control/vehicle control. The blade angle is continuously monitored by an integrated sensor on the fan and communicated to the control unit. The blade angle is adjusted to the cooling requirement by the control ...
-
Manufactured by Advanced Engine Technology Ltd. (AET)based in CANADA
The AVERO diesel powered generator sets are lightweight, compact, fuel efficient, with flexible power (both AC and DC for both 50/60 Hz requirements) and extremely rugged. These small, Flex-Lite Canadian developed generator sets are designed for rugged applications where light weight and durability are important considerations. They are the only air-cooled diesel generator sets of this size that ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you