Gas Combustion Equipment For Energy Management In Asia & Middle East
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology has many advantages over other enclosed combustion systems. It is a robust device capable of handling varying emission flow rates and concentration ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Following many years of R&D and development in the thermal treatment arena. Inciner8 have launched a range of cremation ovens. Most notably is the development of the world's first truly mobile cremator. Utilising hot hearth technology and 4 chamber post combustion gas processing these models are state-of-the-art and will provide many years of trouble-free ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 500-P is a portable A/C powered sample dryer. It can use used with any gas measuring instrument. IMR recommends pairing it with an IMR 1400 or IMR 2800 gas ...
-
PremiumManufactured by EnviTec Biogas AGbased in GERMANY
Our field-tested EnviFarm biogas plants offer you a flexible choice of input materials, and are tailored individually to your business and your specific requirements. As an alternative to being run as slurry-only plants, you can also operate them with biomass or with any type of organic waste. The stable and spacious technical building offered by an EnviFarm plant allows optimum temperature ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME-SLIM packages represent 40 years of experience in electric heating, temperature control, and manufacture of large integrated package ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Computer-controlled gas mixture generation for interference and response sensitivity test, linearity test, and calibration. Used for quality assurance of analyzers or gas sensors in labs, service, and working gases in production ...
-
PremiumManufactured by EnviTec Biogas AGbased in GERMANY
Biomethane upgrading opens up a promising future market for the biogas industry. With feed-in into the public natural gas grid, the green all-rounder is perfect for the decentralised supply of energy, offering a long-term replacement for fossil natural gas and driving the energy transition forward. What’s more, the biomethane manufactured in the gas upgrading plant has the exact same ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Biogas Dehumidification System (BDS) removes water from biogas, protecting combined heat and power (CHP) engines from corrosion and cavitation. It can be supplied with a heat recovery section, increasing the overall efficiency of anaerobic digestion (AD) ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Following many years of R&D and development in the thermal treatment arena. Inciner8 have launched a range of cremation ovens. Most notably is the development of the world's first truly mobile cremator. Utilising hot hearth technology and 4 chamber post combustion gas processing these models are state-of-the-art and will provide many years of trouble-free ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Acme electric hot water boilers are economical units that deliver maximum kilowatts in minimum space requirements. Ideal for new boiler applications or as a replacement unit to upgrade existing applications. This model takes up less floor area and fits through smaller openings than oil or gas-fired units. Easy and economical to install, available in sizes from 9 KW to 2600 KW at all common ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 550P device is for the cleaning of gases and is suitable for use in conjunction with all gas measuring and analysis instruments. It is encased in a handy portable case. It is especially designed for use with the IMR 1400 and IMR 2800 series or any other type of combustion gas analyzer. The gas is filtered by the 3 micron filter and then heated by the sampling hose. The unique ...
-
Manufactured by Ross Boilersbased in INDIA
The RAH series hot air generators are offered in vertical or horizontal designs, either as standard models or tailor-made models to match customer’s specifications and applications. Designed in DIRECT and INDIRECT heating types, these systems are practically free from any maintenance and are highly ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Mini-Emissions burner is an Ultra-Low emissions round flame burner.The picture (right) is Zeeco’s GLSF Min-Emissions down-fired burner firing with Refining Fuel Gas in the outer tips and PSA gas in the center tip. This design provides a flame shape that is normally the same width as the outside diameter of the burner tile allowing the burners to be installed in close ...
-
Manufactured by Oxilon Pvt. Ltd.based in INDIA
Industrial Burners have been designed for application in conditions, in which monoblock burners can not be used. Owing to our expertise in this domain, we have emerged as one of the remarkable manufacturers and suppliers of an exclusive range of Industrial Burner. Fabricated as per the international standards using excellent quality raw materials, this burner is offered in different ...
-
Manufactured by Henan Durable Machine Co., Ltd.based in CHINA
The charcoal briquettes extruder machine is widely used for the molding of charcoal powder, coal foam, coal gangue, lignite, anthracite, iron powder, aluminum powder, and other raw materials. And it is often used with the wheel grinder mixer and briquettes cutting machine, and it is the common equipment in charcoal briquettes production ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support ...
-
Manufactured by Henan Machinery & Equipment Company Limitedbased in CHINA
The burner is also called a burner. It can be divided into an oil burner and a gas burner according to the fuel; it is divided into a kiln burner and a boiler burner according to the object of use; it can be divided into industrial burners, civil burners and specials according to the application fields. burner. The fuel burner is divided into light oil (such as diesel) and heavy oil burner (such ...
-
Manufactured by Zhengzhou Boiler Co., Ltd. (ZBG)based in CHINA
Product Category : Hot Water Boiler Type: ZWNS Capacity: 0.35~7MW Pressure: -0.02Mpa Output Water Temperature: 85℃ Return Water Temperature: 60℃ Fuel: Natural gas, Coke oven gas, Light oil, Heavy oil, etc. Overview: Gas fired vacuum boiler, also called as vacuum phase change boiler, is a kind of hot water boiler working under vacuum state, no risk of explosion. The gas fired vacuum hot ...
-
Manufactured by Sitong Boilerbased in CHINA
The structure of SZS series gas fired water tube boiler is arranged as drum longitudinal type “D” shape, it’s quickly assembled boiler with water tubes, has the characteristics of high steam quality, sufficient output, and high thermal efficiency (97%), etc. The structure of furnace water cooling wall and convection gas pass is membrane wall, have good sealability, and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you