Turbine Design Equipment For Energy Management
-
Manufactured by Spaans Babcockbased in NETHERLANDS
The Spaans Babcock Screw Turbine is probably the most efficient technology for low head hydropower sites. Unique is the fish friendliness, long lifetime and minimal operating costs. Spaans Babcock offers grid connected, off-grid and hybrid systems. The Screw Turbine is a further development of the Screw Pump. Whereas the Screw Pump pumps the water up, in the Screw Turbine the water flows down. ...
-
based in USA
Foil bearings offer levels of performance and efficiency unmatched by conventional bearings for high-speed machinery. Ideally suited for use in hostile environments or oil-free systems, these bearings are more resilient and tolerant to misalignment than solid-pad gas bearings. MSI's hydrodynamic (self-acting) compliant foil bearing generates its own load-carrying film from the rotation of the ...
-
Manufactured by Graham Corporationbased in USA
By producing a vacuum at the turbine discharge, condensers increase the overall cycle efficiency. Graham has more than 70 years of design and fabrication experience in the steam surface condenser field. Our knowledge allows for an expedient, accurate design and fabrication process. Using design methodologies and practices that have been honed over time, we work closely with our customers to ...
-
Manufactured by Clean Energy Storage, Incbased in PUERTO RICO
This spherical and virtually silent wind turbine is characterized by the curved rotor blades, which are attached to the rotor hub at both ends. When the Energy Ball® rotor turns it resembles an elongated sphere. This unique feature causes the wind to move parallel to the rotor hub through the rotor. This wind flow pattern forms a key contrast with classic sphere shaped Darrieus turbines, whereby ...
-
Manufactured by Vensys Energy AGbased in GERMANY
VENSYS utilizes permanent magnet technology known from electric drives in navigation and electric vehicles with a tailor-made turbine design concept for wind energy ...
-
Manufactured by PBS Velká BÃteÅ¡, a.s.based in CZECH REPUBLIC
In cooperation with business partners, PBS offers the complete construction of power units (biomass power plants, heating units) for biomass combustion and the joint production of electricity and ...
-
by Jonas Inc.based in USA
Flow-accelerated corrosion (FAC) is the combined actions of corrosion and erosion in the presence of a moving fluid (liquid water or wet steam), resulting in the loss of material and localized reduction of wall thickness. The geometry of each piping component and the temperature of the fluid are the major influences on the rate of FAC. The highest wear rates are around 150°C (300°F). ...
-
Manufactured by GE Powerbased in USA
Our steam turbine portfolio has the breadth and depth to meet any project-specific need, integrating seamlessly with our gas turbines, HRSGs, and balance of plant equipment to ensure operational success, satisfaction, and profitability for our customers across various ...
-
Manufactured by PBS Group, a.sbased in CZECH REPUBLIC
ETG I and ETG II expansion turbines are used for energy efficient reduction of gas pressure in the control and transmission stations of gas pipelines and in chemical ...
-
Manufactured by Bornaybased in SPAIN
Bornay Small Windturbines, is a complete line of wind turbines, with a nominal power between 0,6 to 6 kW, that can provide energy to all kind of installations, mainly cabins, homes, small companies, farms, telecom sites ... Bornay small wind turbines are designed to work in parallel with solar PV systems. The combination of a wind turbine with a solar photovoltaic system guarantees a stable ...
-
Manufactured by Siemens Energy Global GmbH & Co. KGbased in GERMANY
Well-proven H-class technology backed by largest commercially operating fleet experience in the market. Simple cycle power generation (ISO), 450 MW(e), Combined cycle efficiency: 62%, Powerful gas turbine for highly efficient combined cycle ...
-
Manufactured by M+M Turbinen-Technik Gmbhbased in GERMANY
Power generation with steam supply from multiple pressure levels. In our M+M induction turbines, steam is supplied into the turbine at more than one pressure. (In principle, the turbine is supplied with two steam inlets: the ‘normal’ inlet and the ‘induction’ steam inlet.) This permits flexible efficient power generation to be integrated into an existing or complex ...
-
based in AUSTRALIA
The airWAVE turbine is a design evolution, improving upon the original Denniss-Auld turbine. The airWAVE turbine has fewer moving parts and a conversion efficiency that is higher than both the Denniss-Auld and other comparable turbines. Like the Denniss-Auld, the airWAVE turbine is located well above the ocean, with no moving parts in the water. The airWAVE turbine further improves the overall ...
-
Manufactured by Aprovis Energy Systems GmbHbased in GERMANY
Gland steam condensers from APROVIS are used in large steam turbines. Steam can be generated from a variety of sources, such as coal, gas or solar operation. APROVIS supplies the corresponding gland steam condensers for both regenerative and conventional applications as a complete system including blowers. As an industry expert with experience at both national and international level, APROVIS is ...
-
Manufactured by ADES-Tempero Groupbased in SPAIN
The current evolution of irrigation has led to pumping resulting in water displacement to a certain elevation as the best solution to ensure water pressure and address efficient automation. On the other hand, the energy consumption for the drive required for pumps displacing water to a higher elevation involves a higher cost which, in the case of communities of irrigators, also results in an ...
-
Manufactured by ClearPower North Americabased in USA
When electricity is applied to a magnetic fan motor it makes the fan spin, but did you know the reverse also true? If you spin the fan blade backwards it produces electricity. Water pressure is energy, and by using the pressure and flow created by gravity found in places like common water pipes to spin the fan, it transforms the simple water pipe into a generator. The flowing water becomes the ...
-
Manufactured by KK Wind Solutions A/Sbased in DENMARK
Reduce costs and complexity through integrated system solutions delivery. The industry calls for enhanced electro-mechanical system integration deliveries to streamline and simplify wind turbine ...
-
Distributed by First Sunergy LLCbased in USA
Our company has been engaged in wind power generation for over 20 years and we made continuous updating relying on the practical experience for many years and in accordance with the characteristics of wind power generation. This system runs safely, stably and reliably with high work efficiency and long service life. Grid connection wind turbine controller can be manufactured by our company ...
-
Manufactured by Litostroj Powerbased in SLOVENIA
Design principle and range of use: Compact turbines are characterized by small overall dimensions and can be of various types. Their compact design allows simple installation, with major turbine components transported to site pre-assembled. General description & our setup: The majority of turbine types can be effectively implemented in a compact solution, with setup similar to a simplified ...
-
Manufactured by Eclectic Energy Limitedbased in UNITED KINGDOM
The D400 is extremely efficient by design, making it the most powerful and productive wind generator of its rotor size currently available. The D400 has been developed specifically to operate in close proximity to people. The noise and vibration usually associated with small wind turbines has been designed out of the D400. This has been achieved by making the turbine run relatively slowly for a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you