Biogas Holder (Biogas Storage) Equipment
-
Manufactured by Albers Alligatorbased in NETHERLANDS
The Albers Alligator Biogas holder stores biogas safely at pressures up to 50 mbar. The holder is maintenance-friendly and meets the most stringent requirements. Extracted biogas and landfill gas must be stored temporarily in biogas and landfill gas plants and put under a certain pressure for ...
-
Manufactured by ASTIM A.S.based in TURKEY
A biogas holder is generally a floating cover with an extended rim that is submerged into the water level adequately so as to ensure that in the maximum lift position of the floating cover the rim still remains below the top water level. The covers for gas holders are designed with a vertical guided system. The rollers are attached with the ...
-
Manufactured by Biogas Products Ltdbased in UNITED KINGDOM
A stand-alone membrane biogas holder is the most flexible, economical, reliable and efficient biogas storage solution available on the market. The membrane biogas holder consists of an outer membrane layer and an internal ‘complete bag’ membrane layer. The area between the two layers is continually ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
Very usual technology in biogas applications, the double membrane gas holder consist of two three membranes forming a sphere cap with the ground. The outer membrane forms the actual protective construction and is always exposed to a positive pressure required for structural integrity. The processes inside the storage container can ...
-
Manufactured by Ecomembrane Srlbased in ITALY
Two membrane constant-pressure gasholders are designed to store biogas made from anaerobic digestion of organic waste and sludge. They are manufactured with biogas resistant polyester reinforced PVC membranes seam welded by high frequency electronic machines. The 2MASTER system is made with a single upper membrane, pressurized by an air fan ...
-
Manufactured by Beijing Yingherui Environmental Technology Co., Ltd.based in CHINA
The double membrane biogas holder is suitable for storage of various gases, such as biogas, landfill gas, natural gas, etc. It is mainly composed of base membrane (with floor membrane), inner membrane, outer membrane, sealing system, membrane air blower, level meter, intelligent control cabinet and other accessories. The outer membrane ...
-
Manufactured by Ecomembrane Srlbased in ITALY
Three membrane constant-pressure gasholders are designed to store biogas made from the anaerobic digestion of organic waste and sludge. They are manufactured with biogas resistant polyester reinforced PVC membranes seam welded by high frequency electronic machines. The exclusive 3MASTER system is designed to form an upper air ...
-
Manufactured by Chengdu AMOCO Architecture Technology Companybased in CHINA
Dantian AMB double membrane biogas holder{ digester membrane roof, digester cover) by AMOCO is normally installed on top of digester tank, apprearance is usually small hemisphere, belong to the common shape of double membrane ...
-
Manufactured by Ecomembrane Srlbased in ITALY
The constant-pressure CUPOLA M3 is designed to collect and accumulate biogas from directly over anaerobic digesters or sludge holding tanks. They are made with biogas resistant polyester reinforced PVC membranes seam welded by high frequency electronic machines. The air discharge is made with specially designed mechanic valves, while the ...
-
Manufactured by Ecomembrane Srlbased in ITALY
The CUPOLA M2 domes are used in industrial and agricultural plants. They install quickly and can be manufactured with different quality of materials and shapes to suit the needs of the customers. Special high pressure covers can be manufactured with reinforced membranes and oversized welding. In agricultural biogas plants we have ...
-
Manufactured by Chengdu AMOCO Architecture Technology Companybased in CHINA
Double membrane biogas holder is made up of single, or double even three layers of soft high strength polyester fabric membrane material, plus a series of control components, safety components and measurement ...
-
Manufactured by Chengdu AMOCO Architecture Technology Companybased in CHINA
AMOCO DANTIAN AMC type double membrane biogas holder (digester membrane roof, digester cover) is similar with the AMB type one, which is installed on the top of the digester tank with conical.membrane ...
-
Manufactured by Chengdu AMOCO Architecture Technology Companybased in CHINA
Dantian AMA double membrane biogas holder by AMOCO is worked as indenpendent gas storage system, normally hemispherical segment shape, which is also the common shape of double membrane ...
-
Manufactured by Jog Waste to Energy Pvt. Ltdbased in INDIA
Single membrane Biogas Balloon / Biogas holder material (special PVC Coated) is high voltage and fire resistant, resistant to damage by sharpened steel even when red-hot. The Biogas holder is installed in a special ventilated shed. The Biogas holder is designed to collect and ...
-
Manufactured by Jog Waste to Energy Pvt. Ltdbased in INDIA
Double Membrane Biogas Balloon/ holders are used for biogas storage. It’s mounted tightly on the roof of the Digester and separated sphere on surface of Land. The Biogas holder system has a double membrane ...
-
Manufactured by Chengdu AMOCO Architecture Technology Companybased in CHINA
AMOCO DANTIAN AMD type double membrane biogas storage tank(digester membrane roof, digester cover) is the custom made model, the membrane shape is customized according to customers request. The square double membrane gas storage tank is customized for the Indonesian ...
-
Manufactured by Chengdu AMOCO Architecture Technology Companybased in CHINA
AMOCO DANTIAN AMD type capsule double membrane biogas storage tank (biogas ballon, flexible tank, membrane gas tank), customized by customers. 3D diagram in Discussion Stage and Actual Photos after ...
-
Manufactured by WesTech Engineering, LLCbased in USA
As energy costs grow, facilities are increasingly seeking alternative fuel sources, including biogas, to help offset power costs for their plants. WesTech has many years of experience in supplying customers with anaerobic digestion equipment that adds value to plant ...
-
Manufactured by YHR - Beijing Yingherui Environmental Technology Co., Ltd.based in CHINA
Material: Glass-Fused-To-Steel, Type: Bolted Steel Tank, Color: RAL5013 Cobalt Blue, RAL6006 Grey Olive, RAL9016 Traffic White, RAL3020 Traffic Red, RAL 1001 Beige (Tan), Coat Thickness: 0.25-0.45mm, Coating Process: Standard 2 fires 2 coats, 3 fires 3 coats available, Adhesive: 3450N/cm, Elasticity: 500KN/mm, Hardness: 6.0 Mohs, PH Range: Standard Grade 3~11; Special Grade 1~14, Service Year: ...
-
Manufactured by Boselan Tanks Co., Ltd (BSL)based in CHINA
Raw material from the international standard verified factories. We have experienced workers and whole membrane machining lines and strict product quality control process. Single holder Size can be customized from 2m³to 10000m³. Type can be semi-ball or cubic. We provide whole accessories from flange, gas pressure controller system, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you