Ground Flares Equipment For Energy Management In Europe
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's E2T Quasar M8100 series instruments provide continuous monitoring and detection of flare stack pilot (PM), smoke (SM), and flares (FM). Flame detection up to 400 m away. Detection of hydrocarbon and hydrogen flames. CSA/US and ATEX explosion-proof housing. Automatic gain control for adverse weather conditions. Modular opto-electronic package for easy removal from ...
-
Manufactured by Automatic Flare Systems Limited (AFS)based in UNITED KINGDOM
The High Temperature LO-CAL range of flares offers an optimum solution for safe and efficient degassing of old landfill sites or sites with low quality gas. The innovative Lo-Cal high temperature flare is designed to provide greater gas control during the latter phases of a site. Low calorific gas high temperature combustion is necessary on more and more sites due to increased aftercare ...
-
Manufactured by Fives I.T.A.S. s.p.a.based in ITALY
Enclosed ground flares are used to destroy waste gases without radiation effects or visible flames, and with limited noise, minimized footprint and visual impact. Fives offers a range of ITAS enclosed ground flares whose burners and stack are designed to accommodate the thermal requirements of enclosed flames. ITAS pioneering technology includes several options to allow for smokeless operations ...
-
Manufactured by Flare Products Limitedbased in UNITED KINGDOM
The high temperature burner is used for achieving a higher level of flame control and temperature. The flame is much shorter on this type of burner sitting just above the air ports. With this type of burner a temperature of 950 -1000°C can be expected without automatic air control. High temperature burners are generally becoming more widespread and are made of 304 stainless ...
-
Manufactured by Dinex A/Sbased in DENMARK
Dinex designs and manufactures high quality clamps for connecting exhaust components. Our long-term experience enables us to provide custom designs tailored to suit your clamping requirements. We can offer high strength, low weight clamps for demanding applications such as those at elevated temperatures requiring gas-tight joints. Furthermore, we can give technical support in the form of product ...
-
Manufactured by Smitsvonk Holland B.V. - a member of the Durag Groupbased in NETHERLANDS
Ignition of main burners at places where a fixed pilot burner or igniter is not available and a spark is insufficient to ignite the main ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Ghost series of enclosed biogas flares is a simple and cost effective combustion solution for a variety of applications where a hidden flame is required. The superior design, high quality stainless steel construction and unmatched versatility make the Ghost Series Enclosed Flares an exceptional choice for emissions control within the biogas and wastewater industries. Additionally, each ...
-
Manufactured by Conveco Srlbased in ITALY
Enclosed flares HE and HTE type burn biogas in a cylindric enclosure fitted with a high-resistance fiberceramic insulation lining which ensures high combustion efficiency and limitation of both rumbling and radiation. Design of the burner and of the combustion chamber as well as the selection of construction material and ancillary equipment make these flares suitable for installation in projects ...
-
Manufactured by International Combustion Equipment Srl (I.C.E.)based in ITALY
ICE’s flare packages provide a broad broad range of elevated and ground ares, with the most common ...
-
Manufactured by Europem N.Vbased in BELGIUM
Air assisted flares enable the smokeless combustion of low pressure waste gases. Air (or Gas) assisted flares can be used when no steam is available on site. Air assisted flares use forced draft Air or Gas to create turbulence ensuring that sufficient primary combustion air is supplied to the flame. The amount of air and hence the size of the tip and riser depend on the degree of smokeless ...
-
Manufactured by Europem N.Vbased in BELGIUM
Utility Flares (Pipe Flares) are the most basic flare design available, to provide a robust, reliable and flexible solution for the flaring of large volumes of low pressure waste gas when smokeless operation is either not required or can be achieved without an assisting medium (like steam, air or gas). Reliable operation at both full load and partial load is ...
-
Manufactured by Smitsvonk Holland B.V. - a member of the Durag Groupbased in NETHERLANDS
Ignition of waste gas from pipe flares, air and steam assisted flares and ground flares For most flare systems the pilot burner can not be accessed for service. Maintenance or replacement is not possible while the flare is in operation.To safeguard operation, Smitsvonk's pilots provide reliable ignition and stable burning even under the most difficult climate ...
-
Manufactured by BMF HAASE Energietechnik GmbHbased in GERMANY
For use as an automatically operating torch for landfill and other gases, taking into account the regulations of TA-Luft (Air Quality Control) and the BImSchG (German Emissions Standards) and for use as an automatic emergency flare for bio-, sewage and other gases. With flare systems from BMF HAASE, you are on the safe side with the reliable and environmentally friendly disposal of combustible ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air infiltration does not occur. A vortex effect is ...
-
Manufactured by Europem N.Vbased in BELGIUM
Since the 1980’s, key staff of Europem have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications.Europem’s extensive experience in flare design has resulted in a comprehensive range of elevated and ground flare systems and ancillaries to cover the needs of all ...
-
Manufactured by LAMBDA Gesellschaft für Gastechnik mbHbased in GERMANY
The LAMBDA biogas and sludge gas flare serves as an inspection and safety device at biogas and sludge gas plants for the thermal treatment of excess gas. Since the continuous process of gas production in these plants can only be influenced to a slight extent in the event of a failure of the utilisation plant, the LAMBDA flare safely disposes of the biogas not collected in the gas storage. This ...
-
Manufactured by Biogasmetano S.r.l.based in ITALY
BGM-BIOGASMETANO Flare Stack range include open flares (ground and elevated), as well as enclosed low and high temperature flares. All flares are characterized by simple end effective design, reliable equipment and ease of installation; operation is fully automatic. The high efficiency flares, typical for landfills application, ensuring the constant combustion temperature up to 1200 °C and ...
-
Manufactured by Conveco Srlbased in ITALY
HT-E series consist of enclosed ground flares specifically developed for installation in biomass plants where biogas combustion at full-flow is not expected to be required continuously, instead only occasionally when, for instance, engines are being serviced. Combustion occurs inside the cylindrical chamber under a controlled environment, where air is admitted through a damper. This causes a ...
-
Manufactured by Conveco Srlbased in ITALY
HT-S Type are high-performance enclosed ground flare stacks where biogas combustion temperature, flame retention time and destruction efficiency are the results to be achieved. Combustion occurs inside the base refractory combustion chamber and is completed in the upper cylindrical chamber lined with fiberceramic, under a controlled environment. Air flow is admitted into the combustion chamber ...
-
Manufactured by Flare Products Limitedbased in UNITED KINGDOM
On a standard installation gas is piped up to the inlet of the system where there will be a manual isolation valve. A pilot/ignitor off-take is next in line to take the gas for the pilot and ignition system. This line is sized at 25NB and will contain a small flame arrestor before splitting into two separate lines: The first line is the pilot line and will normally start with two solenoid ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you