Heat Recovery Equipment For Energy Management In Australasia
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS MR Series is a complete stainless steel shell and tube heat exchanger designed for hygienic applications. The product flows through both the inner tube and the surrounding shell for regeneration duties. The removable tubes allow hygienic processing on the shell side. The MR Series is an ideal heat exchanger for direct product-to-product heat recovery. Using HRS corrugation technology, ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
Based on the DTI Series, but with an adapted design for direct energy recovery (product vs product) for sludge with low viscosity. The inner tube is removable making it possible to inspect/clean both tube and shell side. It also allows for easier and faster cleaning consequently reducing operational downtime required for these high fouling products. The tube in tube concentric geometry makes it ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS G Series is a complete stainless steel multitube heat exchanger designed specifically for exhaust gas cooling and thermal recovery applications. Similar to the HRS K Series, the exhaust gases flow through the interior tubes and the service fluid flows through the surrounding shell. Using our corrugation technology, heat transfer and efficiency are increased over standard smooth tube ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Biogas Dehumidification System (BDS) removes water from biogas, protecting combined heat and power (CHP) engines from corrosion and cavitation. It can be supplied with a heat recovery section, increasing the overall efficiency of anaerobic digestion (AD) ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Biogas, sewage gas and land fill gas contains not only water vapour, but also a whole host of additional impurities such as hydrogen sulphide, NH3 and siloxane, which, when processed in the utilization system can not only lead to a reduction in efficiency, but also result in damage of the ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables temperature regulation, and prevents excess water ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Brazed Plate Heat Exchanger range works on the same principle as conventional plate heat exchangers, but consists of a pack of corrugated plates joined together and sealed by furnace brazing. Typically the units are copper brazed, however for applications where the medium is aggressive to copper, or for where temperatures range from 225°C to 400°C, then nickel is used. The plates ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 now offer a full range of containerised incineration systems, placing us at the forefront of the latest transportation and industrial trends. Containerisation enables immediate waste management as the units are fully assembled and pre-installed. ...
-
based in AUSTRALIA
If swimming pool backwash water is discharged to sewer or used for irrigation, the energy used to heat that water is also wasted. The CircleClear system allows this heat energy to be ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The Jenbacher Type-2 gas engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at electrical output from 249kWe or 335kWe. The J208 is renowned for its robust design and highest levels of component durability. It is particularly well suited to troublesome gases such as landfill ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The spent byproducts of distilleries have historically been treated as waste. However, the liquid and solid wastes of the distillation industry have greater potential and can be sent to anaerobic digesters and converted into biogas. This biogas in turn can be turned into renewable electricity at high efficiency via GE Jenbacher gas ...
-
based in AUSTRALIA
The Agenitor is a highly efficient power plant with optimsed gas engine and lower fuel costs. This engine is a result of intensive work by the 2G development team at 2G Drive GmbH. It's improved combustion chamber geometry has made it possible to increase the efficiency of the Agenitor range. ...
-
Manufactured by Durag Groupbased in GERMANY
The D-HG 400 high energy ignition device is suitable for the ignition of gas or liquid fuels in industrial burners of any ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and optimised components enable a ...
-
based in AUSTRALIA
Trigeneration combines a highly efficient and low-emission 2G CHP power generation with an absorption chiller. In some instances the heat utilisation of a Cogeneration system is highly seasonal. With the addition of an absorption chiller, additional waste heat from the Cogeneration system can be converted into chilled water for use in cooling processes. Evo’s absorption chillers offer an ...
-
Manufactured by Evapco Inc.based in USA
The Evapcold packaged chiller product line consists of 50 models. Each is completely self-contained and has a very low ammonia charge of less than 1.0 lb per TR. Evapcold units come with several optional features and accessories that make them a truly innovative solution for your refrigeration needs. The chiller provides a chilled secondary fluid (glycol) to the refrigeration load, which ...
-
based in AUSTRALIA
For the large commercial and industrial applications, there is no equal to the Avus series. Avus ranges in size from 527kW to 4,000kW, and larger sizes are available on request. Avus outperforms all other CHP systems and is the ultimate choice for dependable onsite power and thermal generation. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Absorption chillers can be used to deliver a trigeneration solution for a combined heat and power plant. Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide. Absorption chillers can be ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you