Hydro Energy Software near United Kingdom

  • Marine Tidal Energy Software

    Thetis Energy Ltd was formed to investigate the potential for the production of marine energy off the coast of Northern Ireland. Established in 2008 and wholly owned by B9 Energy Offshore Developments Ltd, the company aims to identify the feasibility for a utility-scale (100-200 MW), commercially viable marine tidal scheme near Torr Head, off the ...

    By B9 Organic Energy Limited based in Larne, UNITED KINGDOM.

  • PDReader - Data Analysis Software

    PDReader v7 is used in the 2014 version of the HVPD Longshot PD Diagnostic System. It has been developed in conjunction with PDGold and has likewise evolved through seven versions over 10 years of direct industrial applications by HVPD.

    By HVPD based in Manchester, UNITED KINGDOM.

  • Allocate - Version Ver. 3.0 - Optimal Unit Allocation Software

    Unit allocation / commitment is the process of deciding when and which generating units at each power station to start-up and shut-down. This process is very complicated when 2 or more generating units are considered due to the fact that the number of combinations increases exponentially with the number of available generating units. To solve this ...

    By Allocate based in Albany, NEW ZEALAND.

  • MaxHydro - Hydropower Optimization Software

    Optimization in general, is the search for a feasible operational policy that maximizes or minimizes the value of the objective function. Hydropower is non-linear function though the operation problems in hydropower are non-linear problems. The best solution to non-linear problems can be obtained by application of non-linear optimization ...

    By Allocate based in Albany, NEW ZEALAND.

  • Premium

    Sierra - Version CADET Edge - Dynamometer and Engine Controller Software

    The CADET Edge is part of the CADET range of control, automation and datalogging control systems and is designed specifically for dynamometer control and engine throttle actuation. The CADET system can actuate eddy current, hydraulic, AC or DC dynamometers and will be supplied with the appropriate power modules.

    By Sierra Instruments, Inc. Office in Malvern, UNITED KINGDOM.

  • proWAVE Software

    proWAVE software is an Oceanlinx tool which allows one to model a wave energy converter (WEC) as a fully integrated system including oscillating water column (OWC), turbine, generator, flywheel, and all manner of controls features.

    By Oceanlinx Limited Office in London, UNITED KINGDOM.

  • EPSIM - Optimisation of Alternative Power System Software

    Formulation, evaluation, comparison and optimisation of alternative power system expansion plans.

    By Power & Water Systems Consultants Ltd based in Dorking, UNITED KINGDOM.

  • Powel Optimal Hydropower Software

    Short-term production optimisation. Powel Optimal Hydropower is an optimisation tool used for short-term planning in hydropower systems. Short-term planning is production planning with time horisons of up to a few weeks, with the purpose of utilising the water in manner that maximises the revenues for the produced power. Powel Optimal Hydropower ...

    By Powel AS Office in Bryne, NORWAY.

  • Powel Optimal Midterm Software

    Multi-year production optimisation. Powel Optimal Midterm (POM) is an optimization tool used for mid-term (seasonal) planning in hydropower systems. Mid-term planning is production planning with time horizons of 1-3 years, with the purpose of optimally manage large hydropower reservoirs. POM is based on a multi-stage stochastic optimization model. ...

    By Powel AS Office in Bryne, NORWAY.

  • Inflow Forecasting Software for Hydropower Plants

    Inflow forecasting is essential to keep control of your resources. By managing your resources in an optimal way, you are able to plan the power production and maximise revenue from your assets. Inflow forecasting depends on several elements - weather forecasts, snow cover, ground conditions and the landscape. Powel inflow modeling and forecasting ...

    By Powel AS Office in Bryne, NORWAY.

  • Data Collection System for MW Wind Turbines

    With all relevant data in hand, owners of MW wind turbines can enhance the strategic planning of operation and maintenance - and gain better performance.

    By Spica Technology ApS based in Silkeborg, DENMARK.

  • Version Optima 3 - Energy Optimal Software

    Energy Opticon is, with the software Energy Optima 3, one of the largest suppliers of forecasting and economical computer optimization for energy production. Energy Optima 3 has been on the market since 1992 and our software has been developed and fine-tuned by our staff in collaboration with our customers in a variety of new releases of the ...

    By Energy Opticon AB based in Lund, SWEDEN.

  • SIMSEN-Hydro

    Simulation software for the analysis of electrical power networks, adjustable speed drives and hydraulic sytems.

    By Power Vision Engineering Sarl based in Ecublens, SWITZERLAND.

  • OptiPower

    Custom-designed hydropower optimization tool.

    By Power Vision Engineering Sarl based in Ecublens, SWITZERLAND.

  • Rehm HYKAS - Program for Hydraulic Calculation Software

    HYKAS is a powerful program, allowing dimensioning and detection of sewerage networks while meeting all standards for state-of-the-art hydraulic calculation software. Based on latest software technology, HYKAS provides you with all required calculation methods for dimensioning and detection of sewerage networks.

    By Rehm Software GmbH based in Berg/Ravensburg, GERMANY. from Program for Hydraulic Calculation Software Software line

  • SIMAHPP - Version 5 - Windows Ased Tool for Hydropower Projects Analysis and Energy Simulations

    SIMAHPP is a Windows ased tool for hydropower projects analysis and energy simulations  using hydraulic, financial, and environmental parameters. It provides detailed analysis and results on energy production, economic analysis, environmental impacts, equipment and material selection. Since its release in 2009, SIMAHPP has been used in more ...

    By Hydroxpert Technology based in Meylan, FRANCE.

  • SIMAHPP - Version 4 Professional - Windows Based Software for Hydropower Projects

    SIMAHPP 4 Professional is the latest release of SIMAHPP series. SIMAHPP 4 Professional is an easy to use windows based simulation tool to evaluate the feasibility of hydropower projects. It is initially designed to simulate small hydropower systems of up to 10 MW but now, thanks to the newly added financial module, it can also simulate larger ...

    By Hydroxpert Technology based in Meylan, FRANCE.

  • zenon for Smart Cities

    COPA-DATA is an official and worldwide member of Microsoft’s CityNext initiative and profoundly contributes to establishing Smart Cities. Smart City solutions with zenon can considerably support governments and its citizens to face the challenges of tomorrow, especially in the areas of energy, water/waste water, public transportation and ...

    By COPA-DATA GmbH based in Salzburg, AUSTRIA.

  • TURBNPRO - Version KC4 - Hydroelectric Project Developers Software

    The essential software tool for: hydroelectric project developers, consulting engineers performing feasibility studies and preliminary project designs, water power systems educators. TURBNPRO is the only software of its kind created to develop information on hydraulic turbines, their selection and application under specific site conditions.

    By Hydro Info Systems based in Fairfield, NEW JERSEY (USA).

  • 3DynaFS-BEM - Boundary Element Module

    3DynaFS-Bem is a general-purpose simulation tool for nonlinear dynamics of 3D free surface flows and their interactions with submerged or floating structures.

    By Dynaflow, Inc. based in Jessup, MARYLAND (USA). from Boundary Element Module Software line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you